Bracket Talk
GMC Acadia - Help !

This topic can be found at:
https://drr.infopop.cc/eve/forums/a/tpc/f/80760912/m/2947075286

January 09, 2019, 10:57 PM
Deal Racing
GMC Acadia - Help !
I have a 2010 GMC Acadia. Within the last few months whenever I hit any kind of bumps something rattles in the front end. I put brand new struts on and went and had the car aligned still the same problems but now the sound is 10 times worse after I installed the new struts. So I take it to the dealership and they look at it and everything looks nice and tight no issues but maybe the sway bar link so I buy two along with buying 2 new control arm. I get everything back together and take it for a ride same sound nothing changed and I’m now $850 into this and nothing is resolved. What the heck could it be ? HELP !!!
January 10, 2019, 04:56 AM
DARTSPORT
Check sway bar to frame bushings. Any play around rubber will make a bumping rattle sound....Only takes very little play..
January 10, 2019, 07:16 AM
"The Bender"
Were the upper strut mounts changed?


272" Spitzer
540 Chevy
The Blower Shop XR1
FTI XPM Series Converter
FTI Level 6 Powerglide
3.69@199
.916 60'

2017 Bradenton Heads Up Madness
Open Outlaw Champ

2018 PDRA T/D #5
2019 PDRA T/D #2

2020 Retired From T/D Competition....

2020 Bradenton NMCA Hemi Shootout Winner

2021 getting back into bracket racing with a Gen3 Hemi powered 87 Cutlass.
January 10, 2019, 07:22 AM
jenavet
im with the bender on this one.upper strut mount bearing plates
January 10, 2019, 07:40 AM
Deal Racing
I bought a complete strut unit with spring and all...
January 10, 2019, 10:27 AM
BD104X
There is a GMC Acadia owners forum out there, you can find it with a quick Google search. Most models have a forum of some kind and they are usually a wealth of information, especially in a case like this.


Billy Duhs - BD104X@gmail.com
January 10, 2019, 12:31 PM
Canted Valve
quote:
I bought a complete strut unit with spring and all...

That's not to say you necessarily got the upper bearing the strut rotates on.


Illegitimi non carborundum
January 10, 2019, 12:48 PM
Deal Racing
Please forgive me if I sound dumb but I bought the whole spring : strut kit and everything is one complete kit so basically you take the three bolts off the top just below the windshield wipers and bolt the new one back up all I had to do on the new strut was rotate the bolts around to match up with the existing strut I took off.
January 10, 2019, 12:59 PM
diceman1530
Sway bar frame bushings as said above,cheap and easy try.


Working for the Weekend!!!!
Fordyce Motorsports
January 10, 2019, 02:32 PM
THE HAMMER
check your hood mounting bolts sometimes they get loose and rattle over bumps
January 10, 2019, 02:34 PM
THE HAMMER
also frt. brake pads rattle also over bumps remove wheel and use a rubber mallot and tap the caliper and see if you hear any rattling.
January 10, 2019, 02:38 PM
THE HAMMER
Also the steering coupler gets loose and rattles over bumps
January 10, 2019, 07:40 PM
Eman
My Envoy had a rattle in the LF. It turned out to be a loose bolt in the inner fender. Jack the frt. and beat on the tire with a rubber hammer and see if you can duplicate rattle.
January 11, 2019, 11:39 AM
Deal Racing
Checked all these things ....still rattling under drivers feet every time you hit a bump. I bought the sway bar rubber bushing. That’s the only thing left to change and the front end will be new !
January 11, 2019, 11:53 AM
Deal Racing
I even unhooked the sway bar links and drove it down the road and the noise was still there. So wouldn’t that remove the sway bar bushings out of the problems ?
January 11, 2019, 01:05 PM
Deal Racing
Wonder if I got a defective left strut ?
January 11, 2019, 01:36 PM
"The Bender"
If it got much worse after installing the struts, that's a pretty safe bet.


272" Spitzer
540 Chevy
The Blower Shop XR1
FTI XPM Series Converter
FTI Level 6 Powerglide
3.69@199
.916 60'

2017 Bradenton Heads Up Madness
Open Outlaw Champ

2018 PDRA T/D #5
2019 PDRA T/D #2

2020 Retired From T/D Competition....

2020 Bradenton NMCA Hemi Shootout Winner

2021 getting back into bracket racing with a Gen3 Hemi powered 87 Cutlass.
January 12, 2019, 08:49 PM
THE HAMMER
The steering coupler is right under your feet as mentioned previously,replace it problem solved.
January 12, 2019, 09:29 PM
rusty
quote:
still rattling under drivers feet every time you hit a bump

sure sounds like steering shaft


honesty is the best policy,insanity is a better deffense
1.036, 6.16@ 224

January 13, 2019, 08:08 AM
Woody B
Tighten the subframe bolts


I used to be a people person, but people ruined that.