Looking to replace the pump on my primer. There are no markings on the current pump. What pressure range are people using?

Per James Monroe's website:

Alternative Fuel Pumps - NAPA #610-1051 Facet Pump, JEG'S #10701 (2.5-4 psi) & #10700 (4-7 psi)

http://www.killerrons.com/10.cfm

Thank you

I use a Holley red pump set to 8 psi, but run extended time with it.

I use this:


https://www.edelbrock.com/univ...oline-e85-17301.html


Works perfectly and can get it at any oreileys parts store.

Autozone had a holley facet pump I have been using on mine for years.

So my problem was self inflicted. I've been struggling with a surging idle. Today I realized it started when I moved the fuel solenoid from the pump up to the needle valve. Moved it all back and idle is steady again.

The needle valves can be problematic too. I had to make a lock mechanism for mine to keep it from moving.