GM Tech, Service Stabilitrak

Bracket Talk

This topic can be found at:
https://drr.infopop.cc/eve/forums/a/tpc/f/80760912/m/2667048396

July 07, 2020, 04:47 PM

Bucky

GM Tech, Service Stabilitrak

Along with service traction control, and service TPMS. Not always all of them, but often.

2011 Yukon Denali
Where does one start on this?

July 07, 2020, 05:23 PM

Canted Valve

For future reference they make TPMS bypass devices, they come out of the UK. Unfortunately they don't have any for GM products as of yet. They told me to check back.

July 07, 2020, 05:27 PM

Bucky

It's just odd or seems odd that all three notifications come up all of a sudden.

July 07, 2020, 06:51 PM

T/D6591

You need to start by pulling the codes.

July 07, 2020, 07:02 PM

Bucky

I wasn't sure there would be codes to pull that said any more than what the messages say. If there likely are, I will have them scanned.

quote:
Originally posted by T/D6591:
You need to start by pulling the codes.

July 07, 2020, 07:18 PM

T/D6591

It seems like i get several that have a steering angle sensor issue and it will turn on all 3 lights. If you get a code let me know which one.

July 07, 2020, 09:29 PM

Bucky

will do

July 08, 2020, 12:54 AM

Will Harrison

quote:
Originally posted by Bucky:
Along with service traction control, and service TPMS. Not always all of them, but often.

2011 Yukon Denali
Where does one start on this?

when mine did this it ended up being a lifter failure. Assuming yours has the v4-v8 gas saving collapsing lifters too. Mine ended up getting new cam, lifters, heads
, valley plate and a few other things. Luckily mine was under extended warranty, it was very costly to the warranty company

July 08, 2020, 07:21 AM

Bucky

quote:
Originally posted by Will Harrison:
quote:
Originally posted by Bucky:
Along with service traction control, and service TPMS. Not always all of them, but often.

2011 Yukon Denali
Where does one start on this?
when mine did this it ended up being a lifter failure. Assuming yours has the v4-v8 gas saving collapsing lifters too. Mine ended up getting new cam, lifters, heads
, valley plate and a few other things. Luckily mine was under extended warranty, it was very costly to the warranty company

Lifter? Well that's the last thing I would have expected with traction control and the tpms!

July 08, 2020, 07:24 AM

Mike Frizie

any dtc's

SES lamp on also? Not sure about the corelation between the traction control and TPMS lamp, but Steering angle sensors setting C0710 are common on those to set the SRVC traction and Stabilitrak lamps, assuming no alignment issues.

July 08, 2020, 08:45 AM

Bucky

No SES lights. And it seemed like the TPMS light had a few days or a week head start on the others. Could be unrelated. Vehicle runs well and tracks straight.

July 08, 2020, 08:51 AM

Mike Frizie

NEED A SCAN THE ABS SYSTEM AND ECM FOR A DTC

July 08, 2020, 09:02 AM

Bucky

I'm assuming that parts stores cannot scan the ABS? I was hoping this could be a DIY, but maybe it won't be. Not sure how difficult the steering sensor replacement is.

July 08, 2020, 11:17 AM

Tim Mitchell

AutoZone should be able too scan it

July 08, 2020, 11:38 AM

Mike Frizie

IF I REMEMBER CORRECTLY, YOU HAVE TO PULL THE COLUMN ASSEMBLY OUT. NOT TERRIBLE, BUT DOES REQUIRE PROGRAMMING/ SET UP ONCE REPLACED.

July 08, 2020, 12:57 PM

Bucky

Never straight forward. I have read bad battery, cables, tps, brake switch, steering sensor, or cam and lifters.

July 08, 2020, 01:03 PM

"The Bender"

Jack up the truck and drive a new one under it..….

272" Spitzer
540 Chevy
The Blower Shop XR1
FTI XPM Series Converter
FTI Level 6 Powerglide
3.69@199
.916 60'

2017 Bradenton Heads Up Madness
Open Outlaw Champ

2018 PDRA T/D #5
2019 PDRA T/D #2

2020 Retired From T/D Competition....

2020 Bradenton NMCA Hemi Shootout Winner

2021 getting back into bracket racing with a Gen3 Hemi powered 87 Cutlass.

July 08, 2020, 01:22 PM

Mike Frizie

NEVER SAID WHAT THE CODE WAS MAN!?

AND TPMS COULD SIMPLY BE A BAD SENSOR. THEY DO HAVE BATTERIES THAT GO .