May 06, 2018, 07:44 PM
Rick S 3596Check Stall Speed with SLE
I have a Mega 450. I installed a different converter and want to check the stall speed before I get to the track. How can I override the SLE dropping to idle when I engage the transbrake?
May 06, 2018, 07:52 PM
jimmycIf you sle has the slip collar on it I believe you can lock it out that way to check the converter
May 06, 2018, 08:29 PM
rustyif you have the bypass button for reverse that will work,or you can go to sfo mode and turn the sle off,if i remember correctly
May 06, 2018, 09:15 PM
MikeB4963perfect opportunity to install a backup button.
IMHO a backup button is needed, stops the timers from cycling and is great for trans break checks and stall checks.
May 06, 2018, 11:28 PM
Allen1020Unhook either wire on the sle
May 07, 2018, 05:07 AM
SP 124XI gave up on stall testing long ago. If you're not going to change anything based on the stall info you get from the static test just wait for the track. If you are dead set on testing it on jackstands setting the SFO to 5 or a zip tie with the air off are the easiest.
May 07, 2018, 06:14 AM
Rick S 3596I will try the back up button. Thanks
May 07, 2018, 09:22 AM
Lenny5160Back up button will work.
Also, the easiest way through the box is to change your SLE time. It is probably set to 1111 (0.8 seconds before transbrake release) or 0100 (1 second before transbrake release).
If you change that to 2222, the car will not go on the SLE when you press the button.
May 07, 2018, 11:22 AM
teamJust read the replay tach on your Mega 450 to see what the flash stall is when you launch.
May 11, 2018, 05:50 PM
Rick S 359622.22 on the timer worked. Thanks
May 13, 2018, 03:13 PM
00 DEAD ONJust take the wire off it. It will not work then