Go
New
Find
Notify
Tools
Reply
  
FTI Powerglide?
 Login/Join
 
DRR Top Comp
posted
I have an FTI billet case powerglide that I need to borrow the input shaft out of it....it doesn't just pull out like a normal glide.....Why not?


.
Dave



F J B

 
Posts: 4543 | Location: Earth | Registered: February 08, 2006Reply With QuoteReport This Post
DRR Pro
posted Hide Post
Hung up on the wedding band.

You can put a rag around it and lightly tap it forward.
 
Posts: 2998 | Location: Boon Docks, FL | Registered: March 22, 2005Reply With QuoteReport This Post
DRR Top Comp
posted Hide Post
quote:
Originally posted by Trans Lady:
Hung up on the wedding band.

You can put a rag around it and lightly tap it forward.


I little tapping and it came right out....it had a couple Teflon rings on the shaft I thought might be holding it up. (?) My old powerglide shaft had metal snap ring looking things on it


.
Dave



F J B

 
Posts: 4543 | Location: Earth | Registered: February 08, 2006Reply With QuoteReport This Post
DRR Pro
posted Hide Post
quote:
.it had a couple Teflon rings on the shaft I thought might be holding it up. (?)



The rings go into the stator in the pump.
The wedding band is on the other side of the clutch drum.

So, the input shaft splines sometime get hung up on the wedding band making a little hard to pull out,
 
Posts: 2998 | Location: Boon Docks, FL | Registered: March 22, 2005Reply With QuoteReport This Post
  Powered by Social Strata  
 


© DragRaceResults.com 2024