DragRaceResults.Com    Bracket Talk    Bracket Talk Forum  Hop To Forum Categories  Tech Talk - by Abruzzi    Need some welding on a head done...
Go
New
Find
Notify
Tools
Reply
  
Need some welding on a head done...
 Login/Join
 
ski_dwn_it
DRR Sportsman
posted
Who do you recommend? Dart Pro 1 335cc heads. #1 int valve dropped - took out #1 piston, and #8 with moderate nicks and dings in head.



Configuration: 3350#, 582 C.I.,

60 - 1.24
1/8 - 5.53@ 126MPH
1/4 - 8.73@ 159MPH


3700#+210lb driver, FULL interior, through mufflers, 10.5 tire.
60'-1.333 (IN 4000ft DA! Joisy Math excluded; 1.25sec using JOISY MATH.) Wink
1/4 - 9.60@144MPH
 
Posts: 1464 | Location: St Marys | Registered: January 12, 2004Reply With QuoteReport This Post
WHOMPWHOMP
DRR Pro
posted Hide Post
Scott Duggins...
 
Posts: 1275 | Location: USA | Registered: December 04, 2008Reply With QuoteReport This Post
Mike Frizie
DRR Sportsman
Picture of Mike Frizie
posted Hide Post
X2 PAR


Michael Frizie
ET 2471
 
Posts: 638 | Location: Winston, GA | Registered: April 10, 2002Reply With QuoteReport This Post
David Gerard
DRR Sportsman
Picture of David Gerard
posted Hide Post
I had one of my heads repaired after dropping a valve by Dart and it came back looking like it was never damaged!
 
Posts: 454 | Location: Fullerton, CA | Registered: June 08, 2008Reply With QuoteReport This Post
Mitch H
DRR Trophy
Picture of Mitch H
posted Hide Post
quote:
Originally posted by ski_dwn_it:
Who do you recommend? Dart Pro 1 335cc heads. #1 int valve dropped - took out #1 piston, and #8 with moderate nicks and dings in head.


I wrecked a 12 degree head pretty good at the track in your bottom picture. Had a guy in West Newton, PA fix it like new.
 
Posts: 154 | Location: PA | Registered: December 31, 2016Reply With QuoteReport This Post
  Powered by Social Strata  
 

DragRaceResults.Com    Bracket Talk    Bracket Talk Forum  Hop To Forum Categories  Tech Talk - by Abruzzi    Need some welding on a head done...

© DragRaceResults.com 2024