May 28, 2025, 12:56 PM
ski_dwn_itMSD Wideband and Racepak
Does anyone have the msd wideband logging in racepak. Mine just flat lines when looking at the graphs in racepak. In msd review it's fine. Would be nice to just be able to see it all in racepak.
May 28, 2025, 03:10 PM
markemarkAs I recall “only” the 13 channels listed in MSD 7730 Data Acquisition/ Racepak can be shared, no additions.
May 29, 2025, 06:11 AM
ski_dwn_itquote:
Originally posted by markemark:
As I recall “only” the 13 channels listed in MSD 7730 Data Acquisition/ Racepak can be shared, no additions.
Can the WB02 be one of them?
May 29, 2025, 07:20 AM
markemarkYour Channel Choices are fixed
May 29, 2025, 07:32 AM
markemarkThe MSD 7765 has a 0-5 VOLT A/F OUTPUT and possibly scaled in Racepak. I recommend contacting Greg Kelley to inquire about using this with Racepak.
May 29, 2025, 07:58 AM
ski_dwn_itok thanks. Its been awhile since I hooked it up. Got frustrated and gave up. I am thinking I am using the 0-5 output. Racepak tries to log the AF but it just comes across as flat.
You would think this is something they would incorporate
May 29, 2025, 08:55 AM
Greg KelleyMark is correct only the 12 listed. And yea, the 0-5 into Racepak works. You need a 0-5 v-net module.
Scaling for methanol is 0 will become 3.94 and 5 will become 7.88.
I think the 7765 instructions have the gas scale.
May 29, 2025, 10:04 AM
ski_dwn_itquote:
Originally posted by Greg Kelley:
Mark is correct only the 12 listed. And yea, the 0-5 into Racepak works. You need a 0-5 v-net module.
Scaling for methanol is 0 will become 3.94 and 5 will become 7.88.
I think the 7765 instructions have the gas scale.
Thanks Greg and Mark for the input. Ok makes sense I need the 0-5v module. Greg do you carry these?
