Hoping some one has one laying around as back up so I can get few dimensions. Need to know overall length,Diameter. Distance from center of drive gear to left edge if you are facing drive or on BBC would be block side.

Have super tight fit and trying to decide if this is way to go or will it require butt load of mods. Doesn't everything?

Wide, Mark is a good guy and easy to talk with. Leave a message, he will get back to you.

And check your PM

http://houseofpayneperformance.com/

Sent email and called.Message is they are off for week for 4th.How dare them take vacation when I have a question.LOL

Will probably have to wait,just never been my strong suit.

quote:

Originally posted by wideopen231:
Hoping some one has one laying around as back up so I can get few dimensions. Need to know overall length,Diameter. Distance from center of drive gear to left edge if you are facing drive or on BBC would be block side.

Have super tight fit and trying to decide if this is way to go or will it require butt load of mods. Doesn't everything?

Premium Starter Super Duty

$358.00



Add to cart
Category: Starters

• Description
• Additional information



Additional information


Weight
13.00 lbs

Dimensions
10 x 8 x 8 in

The ultimate big dawg 139 has 33% more power. Not that one I have doesn't spin motor quick enough with new 16v battery.Just would like extra in case of.

If ultimate big dawg 139 just will not fit I will go with big dawg 139.

If it will fit you will like it

I will be at piedmont this weekend and have a spare in my trailer. Running SG and work with Mark.

I responded to your PM.

I know there have been updates to the mounting blocks for the UBD to provide more clearance on the block side. Mine has this update.

quote:

Originally posted by suprodn:
I will be at piedmont this weekend and have a spare in my trailer. Running SG and work with Mark.

I amy run down there and check it out for cpl minutes. TOO DANG hot to stay long.LOL You driving car in avatar? Name or anything on trailer to look for?

Chris, I switched to the 139 ultimate big dawg this year, it spins the engine faster than my Meziere did, not that it was a problem. Both are on 16v.

quote:

Originally posted by wideopen231:

quote:

Originally posted by suprodn:
I will be at piedmont this weekend and have a spare in my trailer. Running SG and work with Mark.

I amy run down there and check it out for cpl minutes. TOO DANG hot to stay long.LOL You driving car in avatar? Name or anything on trailer to look for?

Yes car is in avatar and has Big Bawg 139 on the door it will be parked at the white trailer with a motorhome shouldn’t be too hard to find

That's right Mop...white trailer with MH shouldn't be hard to find.

ep-the Big Dawg will spin it like the plugs are out Wide

Just another white trailer?

Dang it Bender I resisted that and here you have gone and done it.

I’m at the track parked outside before the gate you pay at on the right as you come in white trailer

Will try to get down in morning .Hopefully you guys will get race off ,mother nature is not playing nice,but farmers are happy.

What brand flexplate are you guys using ? I'm thinking of up grading to 139 tooth and 16 volts.

I have the ATI in my car. Got it from Mark when I got the starter.

Meziere

JW flywheel.Again a piece that was laying arounf from earlier set up. Strong piece,wish was lighter.

As for starter. Unless I cut diagonal in engine bay its the big dawg 139 because ultimate will not fit. Well I could move to left side(normal Hemi) cut block,rewire main cable and cut off and it would work. So going with big dawg139.

One day I am going to try that normal route thing again.LOL