November 01, 2020, 06:32 AM
<DOTracer>bbc electric water pump
I need to decide what to do about a new water pump for my bbc. The front cap on the electric motor was damaged slightly on the Meziere high flow pump I have.
Was looking at their web site and thought about going to the standard flow (35gpm) but they claim it's only good for 650 hp, and my bbc makes 1130. The standard flow pump can use an AN fitting down to -12.
The high flow only comes with a 1 3/4" hose attachment and I cut it shorter and welded an AN fitting on but the smallest I could make fit the 1 3/4" nipple was a -16.
I know some have been using smaller AN hoses.
So for a block mounted electric water pump for a 1100 hp bbc, what are people using and what size AN hose.
I guess worst case I could send my current water pump back for repair...
November 01, 2020, 06:43 AM
Top355xIf it worked well why change what has worked
November 01, 2020, 06:45 AM
<DOTracer>quote:
Originally posted by Top355x:
If it worked well why change what has worked
Well the pump is 11 years old, showing it's signs of age, plus the end cap of the motor is damaged. Building a new car to replace the old one, so now is the time to switch if I'm going to.
November 01, 2020, 07:23 AM
1320racerStandard Meziere water pump on my 1107HP bbc in my dragster with -12AN hose.
November 01, 2020, 08:12 AM
<DOTracer>quote:
Originally posted by 1320racer:
Standard Meziere water pump on my 1107HP bbc in my dragster with -12AN hose.
Just looked and it appears with the WP100 standard pump they have two motor options.
One is the standard motor which is 35 gpm, and an option for a HD motor with a 42gpm.
November 01, 2020, 08:17 AM
1320racerI have the standard/35gpm
November 01, 2020, 08:31 AM
green1I have standard on my car but only 950 hp on gas and it cools my doorcar just fine. On a side note you can buy the endcap from Meziere or send it to them and have it replaced and tested.
November 01, 2020, 08:49 AM
B KINGquote:
Originally posted by DOTracer:
Just looked and it appears with the WP100 standard pump they have two motor options.
One is the standard motor which is 35 gpm, and an option for a HD motor with a 42gpm.
We use the HD 42gpm on our sbc & plan on still using it for our future 1000 hp (approximately) sbc.
November 01, 2020, 09:21 AM
RPROGASquote:
Standard Meziere water pump on my 1107HP bbc in my dragster with -12AN hose.
Same with my door car, never had a overheating problem even on the warmest days.
Bob
November 01, 2020, 09:28 AM
markemarkquote:
Originally posted by 1320racer:
I have the standard/35gpm
^^^^ This. I believe your cooling system size and fan/s based on the fuel you’re using is more important.
November 01, 2020, 09:33 AM
TonyB6255I am using the standard Meziere pump and -12 lines on my 1300 hp BBC. I've never had an issue cooling eve on the hottest days.
November 01, 2020, 12:50 PM
Top355xDidn’t mean use the damaged one meant replace with same unit if it did all you needed it to
November 01, 2020, 06:17 PM
AlaskaracerStandard Mezeire as well. Works just fine. I was running too hot on gas, but not a fault of the pump, too small of a radiator for my stuff...alky solved that issue though....
November 02, 2020, 10:57 AM
1legFor most drag racing only cars the 35 or 42 GPM pump will work fine.
If you want to cool down really fast between rounds put larger coolant lines on any pump and you will see an improvment.
November 03, 2020, 07:37 AM
inferno camaro1100 hp all aluminum 632 35 gallon 12an hoses on methanol. Never gets hot.