Go
New
Find
Notify
Tools
Reply
  
2012 GMC Yukon
 Login/Join
 
DRR Trophy
posted
Needing to change front brake pads on a 2012 Yukon 4wd. Just looking for advice on how to perform this task. Is it any different than just changing out pads on a regular front end. Any special tools needed?
 
Posts: 79 | Location: oklahoma | Registered: November 26, 2009Reply With QuoteReport This Post
DRR Sportsman
Picture of Hotrod Corvette
posted Hide Post
Same ole same ole...


Burt

I'm So Proud To Be An American And Not A Democrat...

 
Posts: 1225 | Location: Clinton Township, MI | Registered: September 16, 2002Reply With QuoteReport This Post
DRR Trophy
posted Hide Post
If it the style I think it is you need a good torx bit to get calipers off
 
Posts: 396 | Location: Natick MA | Registered: November 15, 2017Reply With QuoteReport This Post
DRR Pro
Picture of Eman
posted Hide Post
Open bleeders before pushing piston back. Don't push old fluid back into ABS or MC.
 
Posts: 1479 | Location: E TN | Registered: February 13, 2009Reply With QuoteReport This Post
  Powered by Social Strata  
 


© DragRaceResults.com 2024