December 19, 2018, 08:23 PM
No Fearjets
Does anyone know where I can buy oversize jets for alcohol carb ?These are bigger thread size than any that I have in my other carbs !
December 19, 2018, 08:28 PM
WHOMPWHOMPBLP....
December 19, 2018, 08:35 PM
rustyx2
December 19, 2018, 09:18 PM
Curly1I think these Holley Alcohol jets are for the larger threads?
https://www.summitracing.com/parts/hly-36-201 https://postimg.cc/gallery/np3zpruo/"Dunning-Kruger Effect"
-a type of Cognitive bias where people with little expertise or ability assume they have superior expertise or ability. This overestimation occurs as a result of the fact that they do not have enough knowledge to know they don't have enough knowledge.
Before you argue with someone ask yourself, "Is this person mentally mature enough to grasp the concept of a different perspective?" If not there is no point to argue.
4X NE2 CHAMPION. 2020 TDRA NE2 Champion
December 19, 2018, 09:21 PM
CURTIS REEDYep they are 5/16-32 thread. Those BLP jets are nice and they make extended ones for the rear.
December 19, 2018, 09:56 PM
seabassBlp also has a thread that .350, little bigger then the 5/16... so make sure you know what you need
December 20, 2018, 01:44 AM
J178REDGotta like there air bleeds to , BLP are so much easier to read...great stuff
December 21, 2018, 08:38 AM
jmarkaudioBLP "R" jets are the same as a Holley gas jet, 1/4-32 thread. The "H" jet is likely what you want, 5/16-32 thread like a Holley methanol jet. Then the "L jet is for larger methanol carbs, .350-32 custom thread. Like posted above, make sure you get the extended jets for the back side on a drag car.