Oven cleaner will dissolve aluminum if left on long enough.
____________________________ 2017 and 2018 Osage Casinos Tulsa Raceway Park No-Box Champion
2018 Div4 Goodguys Hammer award winner
November 03, 2020, 11:41 AM
TD3550
On the big wrench's in the service trucks. When they rust up from no use, i use Lime away. spray/wipe. Then a good coat of WD-40/wipe.
November 03, 2020, 11:34 PM
Hotrod Corvette
quote:
Originally posted by Bucky: We are disassembling an engine that has significan carbon. Having run alky for so many years, I haven't seen carbon in forever.
I have heard oven cleaner works wonders, and also ultrasonic cleaners. Any experience? What budget ultrasonic machine and what fluid in them?
Also, the crank has some rust...not on the bearing surfaces but on the counterweights. How do you go about removing that?
I'm out of my element with "dirty" parts here. LOL.
Bucky, Just find a shop that has one. It is a 15 minute job. You dunk it in the water and turn it on...all done. We got a new one at the college I work at...it amazed me how good it works. Owning one can be a lot of maintenance...seals go bad if you don't use it enough...then it is the bearing if you don't get right after the leak.
Burt
I'm So Proud To Be An American And Not A Democrat...
November 04, 2020, 05:39 AM
Bucky
I haven't run across anyone with one yet. We are rural. I have heard of guys using the harbor freight deal. Soaking in the parts washer isn't touching it. LOL.
Foxtrot Juliet Bravo
November 04, 2020, 06:30 PM
Canted Valve
Don't mess around with ultrasonic when hi-tec laser is the new wave.
Illegitimi non carborundum
November 04, 2020, 06:32 PM
Bucky
quote:
Originally posted by Canted Valve: Don't mess around with ultrasonic when hi-tec laser is the new wave.
____________________________ 2017 and 2018 Osage Casinos Tulsa Raceway Park No-Box Champion
2018 Div4 Goodguys Hammer award winner
November 05, 2020, 05:47 PM
Bucky
Thank you!
Foxtrot Juliet Bravo
November 05, 2020, 07:25 PM
SCDIV1
I cleaned countless heads and other parts in my engine building days and still do sometimes.
Glass beads in a bead blaster
Nothing could be worse than a Mack cylinder head after about 500,000 miles from a UPS truck.
Hot tanked first and hot water rinsed. That would not touch any very heavy thick carbon built up in intake ports. I used a hammer and a screwdriver or scraper to bust out as much carbon as possible before the hot tank.
Glass beading won’t cut thru gummy carbon. I scrape as much as possible and use solvents that dissolve carbon again before beading.
Alcohol burning engines leave smeary carbon in the exhaust ports. Solvent gets most of it. Even mineral spirits cuts it if it’s thin.
I glass beaded heads of all kinds. Iron and aluminum and any other part that needed cleaning. I’ve even done carburetors that were in rough shape. Turn the pressure down on parts like that.
I still have a big compressor and a beader cabinet that is the size of a 275 oil tank hinged upper half. Works good but is not fun and is a dirty process unless you have a very good reclaimer/vacuum system..
November 05, 2020, 07:42 PM
Bucky
Holy crap lol. That's a lot of carbon!
Foxtrot Juliet Bravo
November 05, 2020, 07:58 PM
SCDIV1
A Mack 6 had 2 heads.
Pretty big intake ports.
One had more of a dog leg shape and would be so blocked with solid coal like carbon I could barely stick a finger thru it!
Busted out chunks and got filthy doing it
I’m still doing dirty jobs every day
One of my specialties, dirty jobs !
November 06, 2020, 08:01 AM
TD3550
LOL. I can hear her now from the other side of the house screaming. "what the ** are you doing"? the lights are dimming down LOL More power Scotty...
November 07, 2020, 10:18 PM
CURTIS REED
Sorry Bucky. Didn’t realize you were tempname
____________________________ 2017 and 2018 Osage Casinos Tulsa Raceway Park No-Box Champion
2018 Div4 Goodguys Hammer award winner
November 08, 2020, 07:08 AM
Bucky
All good! I lost ability to log in there long ago and tried all sorts of stuff to re apply. Couldn't change the name. LOL.
Start up another reactor at the nuke plant!
Foxtrot Juliet Bravo
November 11, 2020, 10:53 AM
Bucky
Anyone use Oil Eater? I have some from long ago. They say 25:1. My heart says full strength. LOL.
Foxtrot Juliet Bravo
November 12, 2020, 09:46 AM
Bucky
Full strength Oil Eater was the bomb in the ultrasonic for carbon. Worked very well.