December 04, 2020, 09:52 PM
imakehpBBC Blower idler bracket
Looking for a blower idler bracket that bolts on the water pump bolts... Anybody?
December 05, 2020, 05:02 PM
David CoveyNot a chevy guy, so I ask. I have one for a small block I think. Will it work on a BBC?
Dave
December 05, 2020, 05:23 PM
imakehpsbc water pump bolt pattern is different
But, if the bracket is at least 12" wide and 6-7" tall I can redrill hole no problem..yours doesn't sandwich between the block and w/p does it?
December 05, 2020, 07:58 PM
BJs Wild RideI have one I could copy for you. I have some 10mm thick material that i used to copy it once already. Just have to skim the nut b/c they’re typically for 7/16 material I think. It would just be a rough finish, no fancy tools here.
Not sure if you need spacers too? I’ve never had spacers, just used bushings/standoffs on the bolts with a dry block. I’m probably going to make some soon to set one up wet.
December 05, 2020, 10:18 PM
"The Bender"I've got two, one polished one black, also have water pump spacers.
December 06, 2020, 02:12 PM
David Coveyquote:
Originally posted by imakehp:
sbc water pump bolt pattern is different
But, if the bracket is at least 12" wide and 6-7" tall I can redrill hole no problem..yours doesn't sandwich between the block and w/p does it?
Nope. Where it it is no wider than where it bolts to water pump h oles, other than top where idler pulley goes.
Dave