 |
 |
 |
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
Go | New | Find | Notify | Tools | Reply | |
| corner weight | Login/Join |
| DRR Trophy |
Trying to ascertain if Im close on my ladder bar set up. Car weighs 2138 with me in it, 188 lbs. heres my corners LF - 468 RF- 453 LR - 639 RR-578 SBC maybe 550 HP Vega Rectangular tube with strut front and coil overs on rear. Big tire. Your comments as always are appreciated. | ||
|
DRR Top Comp |
When I was running ladder bar set up I never scaled car but it was pulling big wheelies and I had to add some preload / move weight to right rear. Once I go it right it would go nice and straight wheels up. My guess as your car is if it is pulling wheelies it will go to the right - add some preload to right rear until it goes straight then scale car and keep that as your baseline. The car will probably be just fine as is if front wheels stay on the ground. Wheels up car will tell you what it needs. https://postimg.cc/gallery/np3zpruo/ "Dunning-Kruger Effect" -a type of Cognitive bias where people with little expertise or ability assume they have superior expertise or ability. This overestimation occurs as a result of the fact that they do not have enough knowledge to know they don't have enough knowledge. Before you argue with someone ask yourself, "Is this person mentally mature enough to grasp the concept of a different perspective?" If not there is no point to argue. 4X NE2 CHAMPION. 2020 TDRA NE2 Champion | |||
|
DRR S/Pro |
Doesn't look bad honestly. I agree that I would run that and see what it tells you. I have never had a ladder bar car to mess with though. My four link car isn't quite as balanced as that looks like and goes straight with the wheels in the air. LF-509 RF-456 LR-521 RR-515 . | |||
|
| Powered by Social Strata |
 | Please Wait. Your request is being processed... |
|
 |
 |
 |
 |
