Go
New
Find
Notify
Tools
Reply
  
BBC Heads?
 Login/Join
 
DRR Sportsman
posted
What’s the going rate for a set of completely stock BBC casting 990 heads? Also, PM me if u have something FS in the New England area.
 
Posts: 497 | Location: N/A | Registered: December 17, 2003Reply With QuoteReport This Post
DRR S/Pro
posted Hide Post
Any port work/bowl work? 12-1800$ if stock not cracked. I bought three sets ( 291) and all three were cracked junk. Money back on two sets...
Open chamber heads. Might be some stocker guys looking...


California Screaming!
Raceless in California!
 
Posts: 4663 | Location: Vacaville  | Registered: January 07, 2004Reply With QuoteReport This Post
DRR Sportsman
posted Hide Post
Stock everything with no work. Pulled from a marine motor.

I know a lot of bracket racers could care less about these heads nowadays. I'm just looking at putting a bracket motor together with about 600 -650hp on alcohol.


Thanks
 
Posts: 497 | Location: N/A | Registered: December 17, 2003Reply With QuoteReport This Post
DRR S/Pro
posted Hide Post
Perfect! Ask Vortecpro on here. He’s Pretty talented with those heads. 650 should be easy..


California Screaming!
Raceless in California!
 
Posts: 4663 | Location: Vacaville  | Registered: January 07, 2004Reply With QuoteReport This Post
DRR S/Pro
posted Hide Post
My friend Bret and Mike Blackstone built a 468 990 headed motor, port match, bowl work and it made 697 on a superflow dyno. I was there and helped tune it. It can be done !


California Screaming!
Raceless in California!
 
Posts: 4663 | Location: Vacaville  | Registered: January 07, 2004Reply With QuoteReport This Post
  Powered by Social Strata  
 


© DragRaceResults.com 2024