September 30, 2019, 08:34 AM
WyattEzells Reply to Broken Chassis Fiasco
Billy, here is a link
https://www.tractorsupply.com/...-arc-welder-120v-90aYou have to purchase the torch, regulator and bottle separate. This one is about 7 years old and has never let us down. It stays in the trailer and is ready to go to work on a moments notice.
September 30, 2019, 10:07 AM
BD104Xquote:
Originally posted by Wyatt:
Billy, here is a link
https://www.tractorsupply.com/...-arc-welder-120v-90aYou have to purchase the torch, regulator and bottle separate. This one is about 7 years old and has never let us down. It stays in the trailer and is ready to go to work on a moments notice.
Thanks - I saw that one but didn't realize the other stuff was sold separate. May have to look into it!
September 30, 2019, 12:15 PM
SCDIV1Keep in mind it's DC only and can only weld steel.....to tig aluminum you need AC output....
I've been told the Harbor Freight el-cheapo machines work ok for the $$
All the cheap machines are offshore and if it's real cheap you have to buy all the other necessary items separate....and some of the stuff is real poor...
I was going to buy a Lincoln Tig 200 about a year ago and should have.....they had a deal but it was still over $1000 but included everything......but a gas bottle....
Works well off 110v from a generator...….its an inverter design power source...