“The Bender”

January 17, 2018, 12:57 PM

T/D6591

“The Bender”

Brian knows about knee pads. But then again so do i,especially after a long day of putting several vehicles on the hoist and setting the rack arms.

January 17, 2018, 01:12 PM

"The Bender"

Moe knows!

After 40+ years of it, so do my knees

272" Spitzer
540 Chevy
The Blower Shop XR1
FTI XPM Series Converter
FTI Level 6 Powerglide
3.69@199
.916 60'

2017 Bradenton Heads Up Madness
Open Outlaw Champ

2018 PDRA T/D #5
2019 PDRA T/D #2

2020 Retired From T/D Competition....

2020 Bradenton NMCA Hemi Shootout Winner

2021 getting back into bracket racing with a Gen3 Hemi powered 87 Cutlass.

January 17, 2018, 01:53 PM

jenavet

when is the big announcement brian?

January 17, 2018, 02:36 PM

"The Bender"

quote:
Originally posted by jenavet:
when is the big announcement brian?

As soon as I get all my ducks in a row.......

January 17, 2018, 03:14 PM

T/D6591

quote:
Originally posted by "The Bender":
quote:
Originally posted by jenavet:
when is the big announcement brian?

As soon as I get all my ducks in a row.......

You have ducks to go with your sheep?

January 17, 2018, 03:28 PM

"The Bender"

It's a zoo around here, that's for sure!
Blue Man

January 17, 2018, 04:08 PM

J178RED

quote:
Originally posted by "The Bender":
quote:
Originally posted by jenavet:
when is the big announcement brian?

As soon as I get all my ducks in a row.......

Your really not going to get ducks in arrow, they will not do that for anyone....LOL

January 17, 2018, 05:14 PM

Joe Burkleo

quote:
Originally posted by T/D6591:
Joe can you watch the oxygen sensor voltage? Also what are your fuel trim levels or block learn numbers?

Moe,
Finally had time to get the data into an excel spreadsheet so that I could look at it.

Block Learn Cell is between 0-9, mostly around 5 and Block Learn Multiplier is steady at 126.

This OBD1 program does not give me any fuel trim numbers. It does show the slow rich/lean flag as lean. It does not change. The rich/lean flag cycles between rich and lean, with more leans than riches.

Looks like Brian is correct in that it is lean not rich.

January 17, 2018, 05:57 PM

"The Bender"

Try propane enrichment to see if it will make it idle good.

January 17, 2018, 06:11 PM

"The Bender"

quote:
Originally posted by J178RED:
quote:
Originally posted by "The Bender":
quote:
Originally posted by jenavet:
when is the big announcement brian?

As soon as I get all my ducks in a row.......

Your really not going to get ducks in arrow, they will not do that for anyone....LOL

Ducks are not all they've quacked up to be........

January 17, 2018, 06:35 PM

Joe Burkleo

quote:
Originally posted by "The Bender":

Ducks are not all they've quacked up to be........

Gotta be careful with a statement like that for some folks in Oregon....they can get pretty riled up when you talk about ducks like that.

Not sure about Moe, but I'm a Beavers fan so it is all good...

January 17, 2018, 06:39 PM

Joe Burkleo

quote:
Originally posted by "The Bender":
Try propane enrichment to see if it will make it idle good.

Never tried that. Can you just take a torch and use it like you would starting fluid, open the valve on the bottle and hold it around the vacuum lines and intake gaskets to see if the motor smooths out.

January 17, 2018, 07:54 PM

T/D6591

quote:
Originally posted by Joe Burkleo:
quote:
Originally posted by "The Bender":

Ducks are not all they've quacked up to be........

Gotta be careful with a statement like that for some folks in Oregon....they can get pretty riled up when you talk about ducks like that.

Not sure about Moe, but I'm a Beavers fan so it is all good...

Who doesn't like beaver?

January 17, 2018, 09:04 PM

"The Bender"

quote:
Originally posted by Joe Burkleo:
quote:
Originally posted by "The Bender":
Try propane enrichment to see if it will make it idle good.

Never tried that. Can you just take a torch and use it like you would starting fluid, open the valve on the bottle and hold it around the vacuum lines and intake gaskets to see if the motor smooths out.

You can. I just put it above the throttle plates. Works great.

January 17, 2018, 09:05 PM

"The Bender"

quote:
Originally posted by T/D6591:
quote:
Originally posted by Joe Burkleo:
quote:
Originally posted by "The Bender":

Ducks are not all they've quacked up to be........

Gotta be careful with a statement like that for some folks in Oregon....they can get pretty riled up when you talk about ducks like that.

Not sure about Moe, but I'm a Beavers fan so it is all good...
Who doesn't like beaver?

Elton John

January 17, 2018, 09:06 PM

"The Bender"

quote:
Originally posted by Joe Burkleo:
quote:
Originally posted by "The Bender":

Ducks are not all they've quacked up to be........

Gotta be careful with a statement like that for some folks in Oregon....they can get pretty riled up when you talk about ducks like that.

Not sure about Moe, but I'm a Beavers fan so it is all good...

I didn't think about that. I like their uniforms and helmets.

January 17, 2018, 10:45 PM

BP758

quote:
Originally posted by "The Bender":
quote:
Originally posted by T/D6591:
quote:
Originally posted by Joe Burkleo:
quote:
Originally posted by "The Bender":

Ducks are not all they've quacked up to be........

Gotta be careful with a statement like that for some folks in Oregon....they can get pretty riled up when you talk about ducks like that.

Not sure about Moe, but I'm a Beavers fan so it is all good...
Who doesn't like beaver?

Elton John

Rotflmao!

January 17, 2018, 11:36 PM

J178RED

Back to the announcement ????

January 18, 2018, 12:27 AM

T/D6591

Tease,that is what he is.

January 18, 2018, 06:33 AM

jenavet

whats so hard about it anyways.just point and go.absolutely no skill involved.even a caveman can do it