Bracket Talk
“The Bender”

This topic can be found at:
https://drr.infopop.cc/eve/forums/a/tpc/f/75460652/m/6267089876

December 27, 2017, 08:49 PM
"The Bender"
“The Bender”
quote:
Originally posted by T/D6591:
I see the troll is on a roll again and back peddling from everyone's challenges.


SSDD.......


272" Spitzer
540 Chevy
The Blower Shop XR1
FTI XPM Series Converter
FTI Level 6 Powerglide
3.69@199
.916 60'

2017 Bradenton Heads Up Madness
Open Outlaw Champ

2018 PDRA T/D #5
2019 PDRA T/D #2

2020 Retired From T/D Competition....

2020 Bradenton NMCA Hemi Shootout Winner

2021 getting back into bracket racing with a Gen3 Hemi powered 87 Cutlass.
December 27, 2017, 08:49 PM
B KING
quote:
Originally posted by "The Bender":
Does anyone else feel like this thread is a "safe" place to go on DRR, if you know what I mean?


Safe from Boy Blunder, nice thread to come visit since he got all butt hurt in here. Guess he got a taste of the real Truth & Facts!


1980 Camaro
Taking the Best Working Small Tire Shyt Box & making it Greater Than Before!
3000 lbs.
Pump Gas 436
December 27, 2017, 08:55 PM
"The Bender"
You can bet your bottom dollar he checks in on here. Sooner or later he won't be able to resist making a post.

Meanwhile, enjoy the freedom from drama, and excessive knowledge............. Laughing my a$$ off


272" Spitzer
540 Chevy
The Blower Shop XR1
FTI XPM Series Converter
FTI Level 6 Powerglide
3.69@199
.916 60'

2017 Bradenton Heads Up Madness
Open Outlaw Champ

2018 PDRA T/D #5
2019 PDRA T/D #2

2020 Retired From T/D Competition....

2020 Bradenton NMCA Hemi Shootout Winner

2021 getting back into bracket racing with a Gen3 Hemi powered 87 Cutlass.
December 27, 2017, 09:12 PM
TORQIN
Ed would never admit he was wrong or add views or posts to this thread?

Pfft...he is watching...bet on it!

Red Card
December 27, 2017, 09:15 PM
"The Bender"
Ed, time to come out of the closet.......


272" Spitzer
540 Chevy
The Blower Shop XR1
FTI XPM Series Converter
FTI Level 6 Powerglide
3.69@199
.916 60'

2017 Bradenton Heads Up Madness
Open Outlaw Champ

2018 PDRA T/D #5
2019 PDRA T/D #2

2020 Retired From T/D Competition....

2020 Bradenton NMCA Hemi Shootout Winner

2021 getting back into bracket racing with a Gen3 Hemi powered 87 Cutlass.
December 27, 2017, 09:26 PM
J178RED
Soooo.... Bender how's the weather out there? Off Topic


HAVE THEY CALLED US YET ? THEY HAVE!!!
December 27, 2017, 09:27 PM
T/D6591
quote:
Originally posted by J178RED:
Soooo.... Bender how's the weather out there? Off Topic
I heard he is leaving for a colder climate.


December 27, 2017, 09:29 PM
"The Bender"
69° and 51° today. Tommorow I'm heading to Omaha where it will be just a little cooler Blue Man


272" Spitzer
540 Chevy
The Blower Shop XR1
FTI XPM Series Converter
FTI Level 6 Powerglide
3.69@199
.916 60'

2017 Bradenton Heads Up Madness
Open Outlaw Champ

2018 PDRA T/D #5
2019 PDRA T/D #2

2020 Retired From T/D Competition....

2020 Bradenton NMCA Hemi Shootout Winner

2021 getting back into bracket racing with a Gen3 Hemi powered 87 Cutlass.
December 27, 2017, 10:22 PM
J178RED
Bender , long johns and your new jacket....

Friday, Saturday and Sunday we will see low 80s and mid 70s for this Hangover Nationals... Hope the new build HANGS in there..... haha



OVER,....30,000 4 days early


clapping


HAVE THEY CALLED US YET ? THEY HAVE!!!
December 27, 2017, 10:31 PM
"The Bender"
Wow, see what happens when Moe and Barry come around?


272" Spitzer
540 Chevy
The Blower Shop XR1
FTI XPM Series Converter
FTI Level 6 Powerglide
3.69@199
.916 60'

2017 Bradenton Heads Up Madness
Open Outlaw Champ

2018 PDRA T/D #5
2019 PDRA T/D #2

2020 Retired From T/D Competition....

2020 Bradenton NMCA Hemi Shootout Winner

2021 getting back into bracket racing with a Gen3 Hemi powered 87 Cutlass.
December 27, 2017, 10:34 PM
Tom396
That makes two places you apparently will not find him: This thread or inside a race car. Take care. Tom Worthington


If it seems that bracket racing has gotten too expensive for you, maybe you are just doing it wrong.
December 27, 2017, 11:15 PM
BP758
quote:
Originally posted by "The Bender":
Barry! You're back! Get all moved?


I had a moment to check in... pacing myself! 3600 lbs to steel recycle, 3 dump runs. It’s my workout / weight loss program. It's so Hot
Been working on new place , start moving in the morning, both trucks and trailers loaded, staged and on the chip...


California Screaming!
Raceless in California!
December 28, 2017, 03:02 AM
Joe Burkleo
quote:


Meanwhile, enjoy the freedom from drama, and excessive knowledge............. Laughing my a$$ off


excessive knowledge---Wealth of Mis-information

There I fixed it for you Brian.
December 28, 2017, 07:30 AM
"The Bender"
Thanks, the excessive knowledge part was just a little sarcasm.......


272" Spitzer
540 Chevy
The Blower Shop XR1
FTI XPM Series Converter
FTI Level 6 Powerglide
3.69@199
.916 60'

2017 Bradenton Heads Up Madness
Open Outlaw Champ

2018 PDRA T/D #5
2019 PDRA T/D #2

2020 Retired From T/D Competition....

2020 Bradenton NMCA Hemi Shootout Winner

2021 getting back into bracket racing with a Gen3 Hemi powered 87 Cutlass.
December 28, 2017, 09:22 AM
B KING
Morning breather from the FAKE Truth & Facts guy! Wow, well over 30,000 views from a thread that was going to die after #1 Delusional left.


1980 Camaro
Taking the Best Working Small Tire Shyt Box & making it Greater Than Before!
3000 lbs.
Pump Gas 436
December 28, 2017, 10:19 AM
J178RED
Bender, you made it to that cooler weather yet, I'm sure that your going to love it .... LOL

Moe, what you working on today... My dually could use a little love....

Barry, How is that weight lost program going, you made it to the half way mark... I Just hate moving so much .... Dang

Slap Head


HAVE THEY CALLED US YET ? THEY HAVE!!!
December 28, 2017, 10:19 AM
"The Bender"
It's like a breath of fresh air in here, Mr. King
Relaxing


272" Spitzer
540 Chevy
The Blower Shop XR1
FTI XPM Series Converter
FTI Level 6 Powerglide
3.69@199
.916 60'

2017 Bradenton Heads Up Madness
Open Outlaw Champ

2018 PDRA T/D #5
2019 PDRA T/D #2

2020 Retired From T/D Competition....

2020 Bradenton NMCA Hemi Shootout Winner

2021 getting back into bracket racing with a Gen3 Hemi powered 87 Cutlass.
December 28, 2017, 10:21 AM
"The Bender"
quote:
Originally posted by J178RED:
Bender, you made it to that cooler weather yet, I'm sure that your going to love it .... LOL


Not till 8:30 tonight. Not sure I'll be able to post much with numb fingers.


272" Spitzer
540 Chevy
The Blower Shop XR1
FTI XPM Series Converter
FTI Level 6 Powerglide
3.69@199
.916 60'

2017 Bradenton Heads Up Madness
Open Outlaw Champ

2018 PDRA T/D #5
2019 PDRA T/D #2

2020 Retired From T/D Competition....

2020 Bradenton NMCA Hemi Shootout Winner

2021 getting back into bracket racing with a Gen3 Hemi powered 87 Cutlass.
December 28, 2017, 10:24 AM
J178RED
quote:
Originally posted by "The Bender":
quote:
Originally posted by J178RED:
Bender, you made it to that cooler weather yet, I'm sure that your going to love it .... LOL


Not till 8:30 tonight. Not sure I'll be able to post much with numb fingers.


Posting with gloves has its challenges ....


HAVE THEY CALLED US YET ? THEY HAVE!!!
December 28, 2017, 11:46 AM
maliciousintent
Brian, have you lost your mind? Omaha this time of year! A Floridian will freeze their arse off.