May 22, 2018, 08:23 PM
"The Bender"“The Bender”
Everybody Wang Chung tonight......
272" Spitzer
540 Chevy
The Blower Shop XR1
FTI XPM Series Converter
FTI Level 6 Powerglide
3.69@199
.916 60'
2017 Bradenton Heads Up Madness
Open Outlaw Champ
2018 PDRA T/D #5
2019 PDRA T/D #2
2020 Retired From T/D Competition....
2020 Bradenton NMCA Hemi Shootout Winner
2021 getting back into bracket racing with a Gen3 Hemi powered 87 Cutlass.
May 22, 2018, 08:44 PM
T/D6591Rip it up,move down,rip it up,move it down to the ground.....
May 22, 2018, 08:49 PM
J178REDNOPE, "were going to have a TV party Tonight, All Right"
HAVE THEY CALLED US YET ? THEY HAVE!!!
May 22, 2018, 09:13 PM
B KINGquote:
Originally posted by jenavet:
How about a nice set on Ed, he needs a serious upgrade from his ugly moobs. It might make him more tolerable in the looks department!
1980 Camaro
Taking the Best Working Small Tire Shyt Box & making it Greater Than Before!
3000 lbs.
Pump Gas 436
May 22, 2018, 09:20 PM
"The Bender"Not on this thread.
272" Spitzer
540 Chevy
The Blower Shop XR1
FTI XPM Series Converter
FTI Level 6 Powerglide
3.69@199
.916 60'
2017 Bradenton Heads Up Madness
Open Outlaw Champ
2018 PDRA T/D #5
2019 PDRA T/D #2
2020 Retired From T/D Competition....
2020 Bradenton NMCA Hemi Shootout Winner
2021 getting back into bracket racing with a Gen3 Hemi powered 87 Cutlass.
May 23, 2018, 12:01 AM
J178REDHey guys better watch out Bender may pick up his marbles and go home ....hahaha
HAVE THEY CALLED US YET ? THEY HAVE!!!
May 23, 2018, 11:53 AM
T/D6591Today is a good day.
May 23, 2018, 12:23 PM
J178REDquote:
Originally posted by T/D6591:
Today is a good day.
NO Moe its a GREAT DAY ,
HAVE THEY CALLED US YET ? THEY HAVE!!!
May 23, 2018, 12:34 PM
T/D6591Heading into a Holiday weekend,what's not to like? When do you race again Nick? Brian is still playing with his bump stick. Jenavet is still looking for something with holes in it to stick his crank into. I am still waiting on my new bullet to show up so i can decide where and when i race next. Barry is home working under a dash board(like he really needs a heater in NorCal). Michael is double checking every nut and bolt on his dragster before next week PDRA race. And i am pretty sure John Taylor is sitting in Florida somewhere buying another race horse.Oh and Mike English is still busy telling everyone that the AllAccess problems are on their end,really he should be taking go-cart driving lessons.
Life is good.
May 23, 2018, 12:55 PM
"The Bender"Playing with my bumpstick? Please don't give jenavet any ideas! Besides that, he's really just wanting to play with blocks.
BTW, it is an awesome day here on DRR!
272" Spitzer
540 Chevy
The Blower Shop XR1
FTI XPM Series Converter
FTI Level 6 Powerglide
3.69@199
.916 60'
2017 Bradenton Heads Up Madness
Open Outlaw Champ
2018 PDRA T/D #5
2019 PDRA T/D #2
2020 Retired From T/D Competition....
2020 Bradenton NMCA Hemi Shootout Winner
2021 getting back into bracket racing with a Gen3 Hemi powered 87 Cutlass.
May 23, 2018, 01:09 PM
J178REDMoe thanks for asking , next race June 2nd in Tucson. This weekend will be spent in my next doors neighbors pool (she is out-of-town for the weekend)and its going to be 103 all weekend.
Moe what's the time table on the new bullet? Sure did like that post Moe of yours now I know what everyone is up to....Hahaha
Just a great day here.....
HAVE THEY CALLED US YET ? THEY HAVE!!!
May 23, 2018, 01:56 PM
T/D6591Not really sure Nick,last i heard was it will ship out this week after it comes off of the dyno.
May 23, 2018, 02:07 PM
"The Bender"quote:
Originally posted by T/D6591:
Not really sure Nick,last i heard was it will ship out this week after it comes off of the dyno.
I'll be going by there soon, I can pick it up and "road test" it for you...……...
272" Spitzer
540 Chevy
The Blower Shop XR1
FTI XPM Series Converter
FTI Level 6 Powerglide
3.69@199
.916 60'
2017 Bradenton Heads Up Madness
Open Outlaw Champ
2018 PDRA T/D #5
2019 PDRA T/D #2
2020 Retired From T/D Competition....
2020 Bradenton NMCA Hemi Shootout Winner
2021 getting back into bracket racing with a Gen3 Hemi powered 87 Cutlass.
May 23, 2018, 02:08 PM
"The Bender"Michael is checking his nuts?
272" Spitzer
540 Chevy
The Blower Shop XR1
FTI XPM Series Converter
FTI Level 6 Powerglide
3.69@199
.916 60'
2017 Bradenton Heads Up Madness
Open Outlaw Champ
2018 PDRA T/D #5
2019 PDRA T/D #2
2020 Retired From T/D Competition....
2020 Bradenton NMCA Hemi Shootout Winner
2021 getting back into bracket racing with a Gen3 Hemi powered 87 Cutlass.
May 23, 2018, 02:16 PM
J178REDquote:
Originally posted by "The Bender":
quote:
Originally posted by T/D6591:
Not really sure Nick,last i heard was it will ship out this week after it comes off of the dyno.
I'll be going by there soon, I can pick it up and "road test" it for you...……...
After your last outing I'm not sure I want you to "road test" anything..... Hahaha
HAVE THEY CALLED US YET ? THEY HAVE!!!
May 23, 2018, 02:29 PM
"The Bender"^^^Ouch^^^
Actually, I owe Moe a couple...…...
272" Spitzer
540 Chevy
The Blower Shop XR1
FTI XPM Series Converter
FTI Level 6 Powerglide
3.69@199
.916 60'
2017 Bradenton Heads Up Madness
Open Outlaw Champ
2018 PDRA T/D #5
2019 PDRA T/D #2
2020 Retired From T/D Competition....
2020 Bradenton NMCA Hemi Shootout Winner
2021 getting back into bracket racing with a Gen3 Hemi powered 87 Cutlass.
May 23, 2018, 02:30 PM
T/D6591quote:
Originally posted by J178RED:
quote:
Originally posted by "The Bender":
quote:
Originally posted by T/D6591:
Not really sure Nick,last i heard was it will ship out this week after it comes off of the dyno.
I'll be going by there soon, I can pick it up and "road test" it for you...……...
After your last outing I'm not sure I want you to "road test" anything..... Hahaha
^^^THIS^^^
May 23, 2018, 02:33 PM
"The Bender"As long as I don't have to deal with D.C. traffic again, I'm good.
272" Spitzer
540 Chevy
The Blower Shop XR1
FTI XPM Series Converter
FTI Level 6 Powerglide
3.69@199
.916 60'
2017 Bradenton Heads Up Madness
Open Outlaw Champ
2018 PDRA T/D #5
2019 PDRA T/D #2
2020 Retired From T/D Competition....
2020 Bradenton NMCA Hemi Shootout Winner
2021 getting back into bracket racing with a Gen3 Hemi powered 87 Cutlass.
May 23, 2018, 03:34 PM
TOP38quote:
Originally posted by "The Bender":
Playing with my bumpstick? Please don't give jenavet any ideas! Besides that, he's really just wanting to play with blocks.
BTW, it is an awesome day here on DRR!
You mean he wants to play with blocks but just can't seam to figure out where he last left them!
May 23, 2018, 03:55 PM
jenavetquote:
You mean he wants to play with blocks but just can't seam to figure out where he last left them!
it was left at brodix with a pile of cash
and seeing me and moe have the same engine builder I guess I'm not the favorite anymore