DragRaceResults.Com    Bracket Talk    Bracket Talk Forum  Hop To Forum Categories  General Discussion - by FTI    source for alumihnum bar stock
Go
New
Find
Notify
Tools
Reply
  
source for alumihnum bar stock
 Login/Join
 
DRR Top Comp
Picture of wideopen231
posted
Looking for good source for aluminum bar stock. Searching on eBay and found lots but would like to find a source that has a better selection. Need to buy pieces, not a full bar.




America home of free. Brought to you by 2nd amendment.
 
Posts: 4547 | Location: Greensboro NC | Registered: May 24, 2011Reply With QuoteReport This Post
DRR Pro
Picture of Alaskaracer
posted Hide Post
I've used both McMasterCar and Metal Supermarkets with very good results. Fast shipping too. Metal supermarkets will cut to any size you want as well.


Mark Goulette
Owner/Driver of the Livin' The Dream Racing dragster
www.livinthedreamracing.com
"Speed kills but it's better than going slow!"
Authorized Amsoil Retailer
 
Posts: 1565 | Location: Back home in Alaska! | Registered: February 13, 2011Reply With QuoteReport This Post
DRR Sportsman
posted Hide Post
Aircraft Spruce is where I buy most of my small quantities of metal.


Denis LeBlanc

 
Posts: 516 | Location: Manchester, NH | Registered: February 03, 2006Reply With QuoteReport This Post
DRR Pro
posted Hide Post
I'm not sure if they go all the way to NC but I buy all of my aluminum from Eastern Metal Supply down here. Great service and delivery.




 
Posts: 1184 | Location: Lake Worth, Fla. U.S. | Registered: August 21, 2001Reply With QuoteReport This Post
DRR Trophy
posted Hide Post
From my experience, I had to buy a whole length 8',20', etc/), then they would cut what I need and give me the leftover piece. If you can find someone who does piecework, great,
 
Posts: 103 | Location: The Flatlands of Western Oklahoma-Land of the Free! | Registered: August 30, 2006Reply With QuoteReport This Post
DRR Sportsman
posted Hide Post
I buy steel and aluminum from here

https://www.shopjfi.com/

They are local to me, so wouldn't know about shipping.



Cool
 
Posts: 624 | Location: Atco, NJ | Registered: March 14, 2002Reply With QuoteReport This Post
DRR Trophy
Picture of MOD894
posted Hide Post
https://www.stockcarsteel.com/

Not sure how close they are to you, but they have always had what I needed


Just Another Pontiac
 
Posts: 48 | Location: Richmond, VA | Registered: April 08, 2003Reply With QuoteReport This Post



DRR Sportsman
posted Hide Post
Might want to try chassis shop in Michigan. I think that sometimes they have small pieces of varying material they sell as a drop box.
 
Posts: 207 | Location: Corunna, Ontario, Canada | Registered: September 30, 2001Reply With QuoteReport This Post
DRR Sportsman
Picture of Bob Deniker
posted Hide Post
quote:
Originally posted by MOD894:
https://www.stockcarsteel.com/

Not sure how close they are to you, but they have always had what I needed


Thank you. Just put in an order.
 
Posts: 622 | Location: Latrobe Pa. | Registered: July 30, 2007Reply With QuoteReport This Post
DRR Pro
Picture of Bruce Williams
posted Hide Post
quote:
Originally posted by wideopen231:
Looking for good source for aluminum bar stock. Searching on eBay and found lots but would like to find a source that has a better selection. Need to buy pieces, not a full bar.


This place is in your hometown it looks like: https://www.alro.com/locations/location.aspx?loc=GB


Bruce Lee Cool

Experience is what you get when you don't get what you want.
 
Posts: 2067 | Location: Chandler Arizona | Registered: August 11, 2005Reply With QuoteReport This Post
DRR Top Comp
Picture of wideopen231
posted Hide Post
I buy some stuff from alro. Actually about 15 miles/ They do not have piece mill stuff. You can get full sheets and maybe full bars. Hard to shelve 90% of 200 or 300 piec e till you might need it.

I meant to have the smaller piece thing as part of OP. Mind ahead of typing thing and just left it out.




America home of free. Brought to you by 2nd amendment.
 
Posts: 4547 | Location: Greensboro NC | Registered: May 24, 2011Reply With QuoteReport This Post
DRR Trophy
Picture of Fabman
posted Hide Post
Our metal supplier only sells full lengths which is anywhere from 20 to 24 foot long.

McMaster is very convenient but not always the cheapest source for small lengths.

Another place to look is eBay. Many machine shops will sell their “drops” at pretty decent prices.
 
Posts: 286 | Location: USA | Registered: August 27, 2022Reply With QuoteReport This Post
DRR Trophy
posted Hide Post
https://go.onlinemetals.com/OT...eAmetkEEI6DNsnPJQZ0= I got 4130 tubing and 4130 plate steel from them they got just about anything you want.
 
Posts: 34 | Location: rubicn wi. | Registered: December 22, 2013Reply With QuoteReport This Post
DRR Sportsman
Picture of Stephen Hughes
posted Hide Post
https://www.shapirosupply.com/


The Pull-Out....for when you want to work smarter, not harder!!!
 
Posts: 337 | Location: Texas | Registered: September 12, 2005Reply With QuoteReport This Post



  Powered by Social Strata  
 

DragRaceResults.Com    Bracket Talk    Bracket Talk Forum  Hop To Forum Categories  General Discussion - by FTI    source for alumihnum bar stock

© DragRaceResults.com 2024