Miscellaneous Parts: List/Ask Prices – [UPDATED]

Best Offer Accepted for Each Item, If Reasonable

Moving from a Nitrous Package to a ProCharger package and no longer need these parts.


565 c.i. Pistons: [List $1800.00, Ask: $800.00]: BME P494SD -494 solid dome; 4.6050” bore; comp height: 1.240; PF91 Forging; custom dome. PH04 Oil Rail Spacers #RA4600; job card #44631 (697G), 884 grams, Compression ratio: @15:1; Valve to piston [3170L.C.]: .115” Intake and 0.130” exhaust. Pins: WP35 .990x2.925 9310 HDTW (195G); PH10 .990x .075 round wire locks.

Crower Rods: [List: $2270 Ask: $700:] B93011B Seven great and one that needs to be checked, but I would have your engine builder or Crower check all of them.; C to C: 6.386; Total weight: 892 gr.; Rotate: 585gr.; Recip: 252gr.; Big end dia. 2.3250” and 0.991 wide; Pin: 0.9900”; Bolt: 90820 Torque: 85# or 0.005” to 0.007” Stretch.

Dan Davis Radiator: [List: $755.00 Ask: $465.00], Shroud, Fan, 22” Wide x 13” High x 2” Thick.

Oil Pump: Titan Drag Racing [rebuilt, still in box] [List: @ $600.00 Ask: $360.00]

Edelbrock Nitrous Controller. [List: $390.00 Ask: $234.00] SKU: 71900

Digi-Set Timer [List: $85.00 Ask: $50.00]: TDLM120L With integrated mounting bracket.



Nitrous Bottle Bracket for Racecar: List: $160.00 Ask: $96.00]: Aluminum for 10 or 15-pound bottles [with switch, plugs, and wiring for 12VDC bottle heater in/on racecar].

Bottle Heater: [List: $80.00 Ask: $48.00]
- 12VDC with connector for wiring above.

Bottle Blanket [List: $30.00 Ask: $18.00]: (for retaining bottle temperature in the lanes -Padded 10-pound blue Summit blanket

Two sets of steel nitrous bottle brackets. [List: $60.00 each Ask: $36.00]

This message has been edited. Last edited by: David Gerard,