Share |
Go
New
Find
Notify
Tools
Reply
  
APD 615 Head Hunter
 Login/Join 
DRR Trophy
Picture of inferno camaro
posted
615 dart big m block, brodix head hunter 383 heads, T&D shaft rockers, 2897 sv2 intake, callies magnum crank, callies ultra rods, wiseco Q16 gas ported pistons, moroso billet oil pump, Erson (APD) camshaft and roller lifters. 95 passes since APD freshen up with new cam and head work, 1070hp on APD dyno. Spent $800 on fully porting the intake after the dyno pull so should be 1080-1090 by what I was told by APD. Still in the car so car hear it run. Best pass 5.11 @ 136 weighing 2500lbs. Ran 5.1's all summer long on methanol. $11,750
574 270 ZERO ZERO NINE FOUR

This message has been edited. Last edited by: inferno camaro,

 
Posts: 29 | Location: Indiana | Registered: January 20, 2020Reply With QuoteReport This Post
DRR Sportsman
posted Hide Post
how many runs on motor total? what was done during freshen up?
 
Posts: 294 | Location: Bellingham MA | Registered: October 21, 2004Reply With QuoteReport This Post
DRR Trophy
Picture of inferno camaro
posted Hide Post
300 total runs since new. Heads had some port work and fresh valve job. Mag and polish crank, honed block, new rings, new clevite bearings, camshaft, new cam button new arp oil pump stud, port intake. Spent $5195.06

Price is now $12,000
1/2 price what APD charges to build this engine.
 
Posts: 29 | Location: Indiana | Registered: January 20, 2020Reply With QuoteReport This Post
  Powered by Social Strata  
 


© DragRaceResults.com 2018