DragRaceResults.Com    Bracket Talk    Bracket Talk Forum  Hop To Forum Categories  Tech Talk - by Abruzzi    Steering wheel quick disconnect?
Go
New
Find
Notify
Tools
Reply
  
Steering wheel quick disconnect?
 Login/Join
 
DRR Trophy
Picture of can'thitthetree
posted
Looking for input from some of you. I am changing out the old hex coupler and looking for something that has less slop. What have you used and how well has it held up?
 
Posts: 28 | Location: elsewhere | Registered: December 11, 2008Reply With QuoteReport This Post
DRR Pro
Picture of CURTIS REED
posted Hide Post
Look at these. Reasonably priced and I love mine. No slop at all.

https://www.cachassisworks.com...se-hubs-flanges.aspx



____________________________
2017 and 2018 Osage Casinos Tulsa Raceway Park No-Box Champion

2018 Div4 Goodguys Hammer award winner
 
Posts: 2916 | Location: KIEFER, OK. | Registered: August 17, 2007Reply With QuoteReport This Post
DRR Pro
Picture of CURTIS REED
posted Hide Post
Also this it is a tapered stub for no slop..

https://timmcamis.com/shop/ste...uick-disconnect.html



____________________________
2017 and 2018 Osage Casinos Tulsa Raceway Park No-Box Champion

2018 Div4 Goodguys Hammer award winner
 
Posts: 2916 | Location: KIEFER, OK. | Registered: August 17, 2007Reply With QuoteReport This Post
DRR Trophy
Picture of can'thitthetree
posted Hide Post
The chassis works looks decent. I just can't bring myself to buy a momo. How long have you used yours? Does the Spud weld over or inside the steering shaft tube?
 
Posts: 28 | Location: elsewhere | Registered: December 11, 2008Reply With QuoteReport This Post
DRR S/Pro
posted Hide Post
You sure the slop is on the coupler? I had hope get sloppy where bolts went through u joints in steering shaft and I just rotated 90* and drilled new holes.
 
Posts: 2591 | Location: at the track | Registered: May 09, 2007Reply With QuoteReport This Post
DRR Pro
Picture of CURTIS REED
posted Hide Post
quote:
Originally posted by can'thitthetree:
The chassis works looks decent. I just can't bring myself to buy a momo. How long have you used yours? Does the Spud weld over or inside the steering shaft tube?



About 10 years and it has developed just a little movement.

It's a stub that welds inside the tube.




____________________________
2017 and 2018 Osage Casinos Tulsa Raceway Park No-Box Champion

2018 Div4 Goodguys Hammer award winner
 
Posts: 2916 | Location: KIEFER, OK. | Registered: August 17, 2007Reply With QuoteReport This Post
DRR Sportsman
Picture of Richie
posted Hide Post
I just got the Strange SFI Q/D and w/ a 6" extension, my wheel must move atleast 1/2" but I don't even notice it when driving?????
 
Posts: 254 | Location: Windsor locks Ct. | Registered: November 25, 2004Reply With QuoteReport This Post



DRR Sportsman
posted Hide Post
NRG innovation steering adapters are awesome. No welding and very easy and zero slop or worries. Not cheap though have about 600 in my momo steering wheel and adapter.



Configuration: 3350#, 582 C.I.,

60 - 1.24
1/8 - 5.53@ 126MPH
1/4 - 8.73@ 159MPH



3700#+210lb driver, FULL interior, through mufflers, 10.5 tire.
60'-1.333 (IN 4000ft DA! Joisy Math excluded; 1.25sec using JOISY MATH.) Wink
1/4 - 9.60@144MPH

 
Posts: 1433 | Location: St Marys | Registered: January 12, 2004Reply With QuoteReport This Post
DRR Trophy
Picture of Maxx Levell
posted Hide Post
Wish I'd have seen this in January. I ordered one of the Grant's that utilize the actual splined shaft already in the car...but it's been back ordered since then...supposed to ship on the 25th of this month, but it's supposed to have shipped multiple times since I ordered it lol.


Maxx Levell

If you're gonna be a bear...be a GRIZZLY!
 
Posts: 92 | Location: Henderson, KY | Registered: July 09, 2002Reply With QuoteReport This Post
  Powered by Social Strata  
 

DragRaceResults.Com    Bracket Talk    Bracket Talk Forum  Hop To Forum Categories  Tech Talk - by Abruzzi    Steering wheel quick disconnect?

© DragRaceResults.com 2024