DragRaceResults.Com    Bracket Talk    Bracket Talk Forum  Hop To Forum Categories  Tech Talk - by Abruzzi    Sr20’ combo converter stall.
Go
New
Find
Notify
Tools
Reply
  
Sr20’ combo converter stall.
 Login/Join
 
DRR Sportsman
Picture of Mike Frizie
posted
Im bored and curious. For those of you running sr20 combo’s in a dragster, what you guys like guys like for a converter stall: drop back . Im Seeing 6800 off the brake and dropping back 600 on the shift.


Michael Frizie
ET 2471
 
Posts: 571 | Location: Winston, GA | Registered: April 10, 2002Reply With QuoteReport This Post
DRR Pro
posted Hide Post
SEND IT…
 
Posts: 1251 | Location: USA | Registered: December 04, 2008Reply With QuoteReport This Post
DRR Sportsman
Picture of Mike Frizie
posted Hide Post
I did whomp. I did.


Michael Frizie
ET 2471
 
Posts: 571 | Location: Winston, GA | Registered: April 10, 2002Reply With QuoteReport This Post
DRR Sportsman
Picture of Mike Frizie
posted Hide Post
guessing everyone's gone nine degree? Razz Big Grin


Michael Frizie
ET 2471
 
Posts: 571 | Location: Winston, GA | Registered: April 10, 2002Reply With QuoteReport This Post
DRR Elite
posted Hide Post
not a whole lot of impressive 9 degrees unless they are part of a 655 and bigger package
 
Posts: 13522 | Location: NJ | Registered: August 20, 2000Reply With QuoteReport This Post
DRR S/Pro
posted Hide Post
quote:
Originally posted by DRB Motorsports:
Im bored and curious. For those of you running sr20 combo’s in a dragster, what you guys like guys like for a converter stall: drop back . Im Seeing 6800 off the brake and dropping back 600 on the shift.

The converter needs to match the entire combo, not just the heads. That said, you are likely very close at 6800. 600 fall back seams low. What do you shift at, 7600? Usually the fall back rpm is about 150 to 200 higher than the launch stall.
 
Posts: 2145 | Location: Tewksbury, MA,USA | Registered: November 03, 2000Reply With QuoteReport This Post
DRR Elite
posted Hide Post
Michael, I have BTE converters you're welcome to try.
 
Posts: 13522 | Location: NJ | Registered: August 20, 2000Reply With QuoteReport This Post



DRR Trophy
posted Hide Post
Mine is unique cause its injected on methanol which everyone said would never work. 615 dart 20's, runs within a couple hundo of similar iron block combos on gas with Brodix 20's. 4.60 @ 150 best ever @ 2000 lbs, last weekend in the south La heat/humidity 4.76 mid day, 4.72 9 hours later 2 AM in the finals. Flashes to 6200 shift at 7300 falls back to 6300. Would like to see mine flash to 65/6600 and fall back to 6700 range but too lazy to pull the converter out and send it off for a re-stall. Oh and thats on Goodyears.
 
Posts: 371 | Location: Pride, La | Registered: April 18, 2006Reply With QuoteReport This Post
  Powered by Social Strata  
 

DragRaceResults.Com    Bracket Talk    Bracket Talk Forum  Hop To Forum Categories  Tech Talk - by Abruzzi    Sr20’ combo converter stall.

© DragRaceResults.com 2024