DragRaceResults.Com    Bracket Talk    Bracket Talk Forum  Hop To Forum Categories  Tech Talk - by Abruzzi    starter of choice
Page 1 2 
Go
New
Find
Notify
Tools
Reply
  
starter of choice
 Login/Join
 
DRR Top Comp
Picture of wideopen231
posted
So what are you guys using for starter? Guess ready or not I am buying new one. 139 tooth flywheel. Checked House of payne seems they are out of everything except their biggest which looks like a fitment issue , hitting block on the inside of the starter.It is left side mounted.

I thought it was a problem a while back, but found ground to be issue. Now hanging, grinding and sounds like shyt. Then I knew it needed replaced just wasn't ready to do yet. Don;t have to have the biggest but probably his big little brother.




America home of free. Brought to you by 2nd amendment.
 
Posts: 4178 | Location: Greensboro NC | Registered: May 24, 2011Reply With QuoteReport This Post
DRR Top Comp
Picture of Curly1
posted Hide Post
I use the Powermaster ultra torque? Any way it is best one I have found. I do highly recommend the 139 tooth flexplate for Chevys.


https://postimg.cc/gallery/np3zpruo/
"Dunning-Kruger Effect"
-a type of Cognitive bias where people with little expertise or ability assume they have superior expertise or ability. This overestimation occurs as a result of the fact that they do not have enough knowledge to know they don't have enough knowledge.

Before you argue with someone ask yourself, "Is this person mentally mature enough to grasp the concept of a different perspective?" If not there is no point to argue.

4X NE2 CHAMPION. 2020 TDRA NE2 Champion
 
Posts: 3992 | Location: United States of Texas | Registered: April 02, 2011Reply With QuoteReport This Post
DRR S/Pro
posted Hide Post
Loved my Meziere until i bought a house of Payne, big dawg 139...awesome starter


J.R. Baxter

""Fathom the hypocrisy of a Government that requires every citizen to prove they are insured ..but not everyone must prove they are a citizen."

2024 Miller
Rolla Competition Engines
ProCharger
Hoosier Tires
Abruzzi
 
Posts: 1515 | Location: Waxahachie | Registered: July 04, 2005Reply With QuoteReport This Post
DRR S/Pro
Picture of "The Bender"
posted Hide Post
quote:
Originally posted by seabass:
Loved my Meziere until i bought a house of Payne, big dawg 139...awesome starter


Same here.


272" Spitzer
540 Chevy
The Blower Shop XR1
FTI XPM Series Converter
FTI Level 6 Powerglide
3.69@199
.916 60'

2017 Bradenton Heads Up Madness
Open Outlaw Champ

2018 PDRA T/D #5
2019 PDRA T/D #2

2020 Retired From T/D Competition....

2020 Bradenton NMCA Hemi Shootout Winner

2021 getting back into bracket racing with a Gen3 Hemi powered 87 Cutlass.
 
Posts: 3096 | Location: Yes | Registered: July 08, 2009Reply With QuoteReport This Post
DRR S/Pro
Picture of Lenny5160
posted Hide Post
GPE on the dragster and Tilton Super Starter on the Nova. Standard 12 volt, 168 tooth stuff here.


Tony Leonard
 
Posts: 3151 | Location: Inver Grove Heights, MN | Registered: March 18, 2004Reply With QuoteReport This Post
DRR Pro
posted Hide Post
The NEW BILLET CSR starter is the best I’ve used an I’ve tried um all…..but it’s $600….
 
Posts: 1251 | Location: USA | Registered: December 04, 2008Reply With QuoteReport This Post
DRR Elite
posted Hide Post
CSR= JUNK with no company support.

I too have tried them all and ran Tilton Super starters for over 3 decades, the original mini race starter. Since switching to 139 tooth flywheel about 3 years ago, I now run House of Payne’s Ultimate Big Dawg in the dragster and Big Dawg in the Firebird.
 
Posts: 13522 | Location: NJ | Registered: August 20, 2000Reply With QuoteReport This Post



DRR Sportsman
posted Hide Post
House of Payne

ep-168 on my small block, 139 going in my new car
 
Posts: 757 | Location: dodging double wides... | Registered: November 28, 2007Reply With QuoteReport This Post
DRR Trophy
Picture of NC3x58
posted Hide Post
House of Payne or Powermaster, albeit I'd much rather have the House of Payne.


Nick Craig

1971 Camaro Split Bumper
376ci LS3
 
Posts: 410 | Location: Ohio | Registered: December 28, 2013Reply With QuoteReport This Post
DRR Pro
posted Hide Post
quote:
Originally posted by 1320racer:
CSR= JUNK with no company support.

I too have tried them all and ran Tilton Super starters for over 3 decades, the original mini race starter. Since switching to 139 tooth flywheel about 3 years ago, I now run House of Payne’s Ultimate Big Dawg in the dragster and Big Dawg in the Firebird.
No problem here with company support…
 
Posts: 1251 | Location: USA | Registered: December 04, 2008Reply With QuoteReport This Post
DRR Elite
posted Hide Post
CSR aka CSI is probably the worst aftermarket automotive performance company I have ever dealt with and many racers would agree as well they have stiffed many on contingency payments not to mention their water pumps are junk too and replacement motors haven't been available from them for years, long before covid too.
 
Posts: 13522 | Location: NJ | Registered: August 20, 2000Reply With QuoteReport This Post
DRR S/Pro
Picture of Lenny5160
posted Hide Post
I've never owned a CSI/CSR product, but I'm stunned to read that they have a new product. I thought they vanished several years ago.


Tony Leonard
 
Posts: 3151 | Location: Inver Grove Heights, MN | Registered: March 18, 2004Reply With QuoteReport This Post
DRR S/Pro
Picture of SCDIV1
posted Hide Post
I had a CSR water pump for years and years without any issue

HOP Starters 139 Big Dawgs

Had 2 and rotated them.....2013 to 2021
 
Posts: 2733 | Location: Where ever I am, I'm here and it's me | Registered: March 15, 2007Reply With QuoteReport This Post
DRR Sportsman
Picture of Mike Frizie
posted Hide Post
House of Payne. Never had an issue with any of the CSR starter we owned.


Michael Frizie
ET 2471
 
Posts: 571 | Location: Winston, GA | Registered: April 10, 2002Reply With QuoteReport This Post



DRR Pro
Picture of CURTIS REED
posted Hide Post
quote:
Originally posted by Lenny5160:
I've never owned a CSI/CSR product, but I'm stunned to read that they have a new product. I thought they vanished several years ago.


I have one of their powerglide full shields that is brand new and has never been on a car but the cert has run out. I contacted them about getting it re-certed and they got back to me right away, so I would guess they are still there.



____________________________
2017 and 2018 Osage Casinos Tulsa Raceway Park No-Box Champion

2018 Div4 Goodguys Hammer award winner
 
Posts: 2921 | Location: KIEFER, OK. | Registered: August 17, 2007Reply With QuoteReport This Post
DRR Pro
Picture of 67TSCHEVY2
posted Hide Post
HOP for the W
 
Posts: 1234 | Location: middle georgia | Registered: July 20, 2003Reply With QuoteReport This Post
DRR Sportsman
posted Hide Post
HOP 139 will spin it like the plugs are out.

ep-
 
Posts: 757 | Location: dodging double wides... | Registered: November 28, 2007Reply With QuoteReport This Post
DRR S/Pro
Picture of Big Steve
posted Hide Post
Certainly nothing wrong with the 139 tooth Meziere but I love my HOP Ultimate big dawg even more.
 
Posts: 2410 | Location: Moving back to the door side | Registered: April 30, 2010Reply With QuoteReport This Post
DRR Top Comp
Picture of wideopen231
posted Hide Post
would like to go with big dawg,especially with all of recommendations. Like I said I am almost positive it will not fit in space.

It is hemi setup and starter is on left side mounted in cut out at back of block.Kind of like stock location,except I had to cut block for it and make the mounting block. Will have to make next mounting block, but hoping this will will adapt over. If not nothing new. How do people run car w/o a milling machine and lathe?

Another issue is availability and one HOP big dawg in stock.

Right now engine is pretty easy to spin.New rods .020 shorter and cost me .57:1 compression. Would like to buy for future combo which is 60 CI bigger with 15:1 instead of 11.8. So buying bigger agins better. wONDER IF THEY HAVE ISSUE IF BUY hop bIG Dawg and if does not fit enchange it for one step down? Might have to give them a call and see if that possible.




America home of free. Brought to you by 2nd amendment.
 
Posts: 4178 | Location: Greensboro NC | Registered: May 24, 2011Reply With QuoteReport This Post
DRR Pro
posted Hide Post
We screwed up when we put a new pan on…starter solenoid was barely hitting pan causing jumper wire to melt off….sent it in had brand new solenoid an back in 3 days no charge….probably the customers some times….
 
Posts: 1251 | Location: USA | Registered: December 04, 2008Reply With QuoteReport This Post
  Powered by Social Strata Page 1 2  
 

DragRaceResults.Com    Bracket Talk    Bracket Talk Forum  Hop To Forum Categories  Tech Talk - by Abruzzi    starter of choice

© DragRaceResults.com 2024