Page 1 2 3 4 
Go
New
Find
Notify
Tools
Reply
  
Air vs. Co2?
 Login/Join
 
BarneyB
DRR Pro
Picture of BarneyB
posted Hide Post
quote:
Originally posted by markemark:

What Viair system model number ?? Where purchased ??


Mark, the one I run and install in cars is part number Viair 10000, purchase at Summit racing around $121. Pro shop #VAR-10000

BB



WiredTwoWin race car wiring



 
Posts: 2436 | Location: Wadsworth, Ohio | Registered: December 12, 2001Reply With QuoteReport This Post
markemark
DRR Pro
posted Hide Post
quote:
Originally posted by BarneyB:
quote:
Originally posted by markemark:

What Viair system model number ?? Where purchased ??


Mark, the one I run and install in cars is part number Viair 10000, purchase at Summit racing around $121. Pro shop #VAR-10000

BB


Thanks for sharing . I like Summit / Jegs best if using mail order.
 
Posts: 2456 | Location: 53056 | Registered: December 30, 2009Reply With QuoteReport This Post
rusty
DRR Pro
Picture of rusty
posted Hide Post
mark i googled that pn and it popped up at jegs summit walmart and others


honesty is the best policy,insanity is a better deffense
1.036, 6.16@ 224

 
Posts: 1408 | Location: texas | Registered: February 17, 2006Reply With QuoteReport This Post
Bucky
DRR Elite
posted Hide Post
quote:
Originally posted by WEH2:
A former racer from around Mooresville, NC used a pvc tank made out of 3" pipe with two end caps. Pumped air in to it with small 12V air compressor like the ones where you can try to pump up a flat tire with. Controlled his pump manually. He would check the pressure and run pump if needed until he got the pressure he wanted. He used the air for his tires and to hold his clutch pedal down until delay box released. Get this the working pressure on pvc is like 275 psi at room temperature.


I believe that is the working pressure for schedule 80 pvc....for liquids only. PVC is not rated for air pressure.

I stumbled across this thread looking for the preset co2 regulators someone had found. I have my regular regulator for the throttle stop and shifter. But I need to regulator that down in line to about 30 psi or so. I haven't found anything reasonably small and reasonably priced yet. I'm sure some racer has run across something.


Foxtrot Juliet Bravo
 
Posts: 6398 | Location: Illinois | Registered: July 08, 2004Reply With QuoteReport This Post
fuzzy dice
DRR Pro
Picture of fuzzy dice
posted Hide Post
I get my CO2 bottles filled at a paintball place...costs 5 bucks per...no problemo...
 
Posts: 1277 | Location: Florida (FL) | Registered: June 06, 2006Reply With QuoteReport This Post
ski_dwn_it
DRR Sportsman
posted Hide Post
quote:
Originally posted by Larry Woodfin:
Mark,

I buy the "Air Armed" from K & R


Bought this past winter... Nice system and never need to worry. Air in Lanes for tires also if needed.
 
Posts: 1438 | Location: St Marys | Registered: January 12, 2004Reply With QuoteReport This Post
NC3x58
DRR Trophy
Picture of NC3x58
posted Hide Post
I got the Viair 10000 system, and all I had to do was add a regulator and I also bought a 1/2 gal tank instead of using the 1 gal just for saving a little space. I wouldn't use CO2 ever after having the compressor and I also ran a line to the rear tires for emergency adjustments.


Nick Craig

1971 Camaro Split Bumper
376ci LS3
 
Posts: 410 | Location: Ohio | Registered: December 28, 2013Reply With QuoteReport This Post



sr4440
DRR Sportsman
Picture of sr4440
posted Hide Post
quote:
Originally posted by Bucky:

I stumbled across this thread looking for the preset co2 regulators someone had found. I have my regular regulator for the throttle stop and shifter. But I need to regulator that down in line to about 30 psi or so. I haven't found anything reasonably small and reasonably priced yet. I'm sure some racer has run across something.


Have you considered a savair regulator? https://store.epsgroupllc.com/...regulator-231as1230/


Without data, you’re just another guy with an opinion.
 
Posts: 1298 | Location: TEXAS | Registered: February 07, 2003Reply With QuoteReport This Post
Bucky
DRR Elite
posted Hide Post
That’s just the ticket. Thank you


Foxtrot Juliet Bravo
 
Posts: 6398 | Location: Illinois | Registered: July 08, 2004Reply With QuoteReport This Post
TomR
DRR Sportsman
Picture of TomR
posted Hide Post
Here are all the parts I installed on my car last year. I added a regulator inline to the SLE and do not regulate the air for tires. I have a hook up (bulkhead fitting) under the rear bumper. I keep the coiled up air hose behind the drivers seat so I don't have to open the trunk to fill the tires.

https://www.amazon.com/gp/prod...05_s00?ie=UTF8&psc=1

https://www.amazon.com/gp/prod...06_s00?ie=UTF8&psc=1

https://www.amazon.com/gp/prod...03_s00?ie=UTF8&psc=1

https://www.mscdirect.com/product/details/84426022

https://www.harborfreight.com/...l-coupler-63550.html


72 Nova "Hooptie"
 
Posts: 739 | Location: Hanover, MD | Registered: June 20, 2016Reply With QuoteReport This Post
  Powered by Social Strata Page 1 2 3 4  
 


© DragRaceResults.com 2024