DragRaceResults.Com    Bracket Talk    Bracket Talk Forum  Hop To Forum Categories  Tech Talk - by Abruzzi    What is typical rpm gain from 1/8 to 1/4 ?
Go
New
Find
Notify
Tools
Reply
  
What is typical rpm gain from 1/8 to 1/4 ?
 Login/Join
 
DRR S/Pro
posted
Haven’t been running 1/4 mile and made one pass a few weeks ago and numbers seem off so just curious what typical rpm gain would be.
The car is 95 Monte Carlo 900 up 548, glide , 4.30 rear gear and 100” rollout rear tires.
I want to hear some typical numbers first then I will post what it ran. Mph and rpm on this run seemed off. It does run 5.30s in summer heat.
 
Posts: 2591 | Location: at the track | Registered: May 09, 2007Reply With QuoteReport This Post
DRR Sportsman
posted Hide Post
500-700 depending on convertor slippage
 
Posts: 604 | Location: nw ohio | Registered: November 20, 2001Reply With QuoteReport This Post
DRR S/Pro
posted Hide Post
That’s what I was thinking. I will have to go verify tach settings but on that pass the shift light came on a second time a good ways before the finish line and I am shifting at 7500 and usually cross through 1/8 at 6600. All the times on the slip seem to be correct just puzzled by the MPH and what I think the 1/4 finish line rpms were. Car went 8.45 @ 168 according to slip and I would expect it more around 160.
 
Posts: 2591 | Location: at the track | Registered: May 09, 2007Reply With QuoteReport This Post
DRR Pro
Picture of 27Keith
posted Hide Post
For E T you can take the 1/8 mile time and multiply by 1.58 and it's usually real close to the 1/4 mile time.
Also another formula is this. Multiply your ET by your mph, it should be close to 1320.. If it's less then your mph is low, if its higher than 1320 then you run good mph


4 X Track Champion ( 2 & 2 )
2 X Run off Winner
 
Posts: 2084 | Location: out there | Registered: March 31, 2004Reply With QuoteReport This Post
DRR Pro
posted Hide Post
quote:
Originally posted by 27Keith:
Also another formula is this. Multiply your ET by your mph, it should be close to 1320.. If it's less then your mph is low, if its higher than 1320 then you run good mph


Would this also work correctly for 1/8 mile ?
 
Posts: 2434 | Location: 53056 | Registered: December 30, 2009Reply With QuoteReport This Post
DRR S/Pro
posted Hide Post
Well I was in the trailer this evening messing with the car and found second shift point was set at 7000 so that would be why it came on so early now I just don’t believe the mph.
 
Posts: 2591 | Location: at the track | Registered: May 09, 2007Reply With QuoteReport This Post
DRR Sportsman
Picture of FootbrakeJim
posted Hide Post
quote:
Originally posted by markemark:
quote:
Originally posted by 27Keith:
Also another formula is this. Multiply your ET by your mph, it should be close to 1320.. If it's less then your mph is low, if its higher than 1320 then you run good mph


Would this also work correctly for 1/8 mile ?

Never hear that formula before but it seems very close. I used my 1/8 times as well, and it seems pretty accurate as well, (I just used the 1/8 mile figure in feet, of 660 instead of the 1/4 mile 1320 Ft). Cool. Wink


Dan "Jim" Moore
Much too young to feel this damn old!!
 
Posts: 1032 | Location: Farmersville, TX  | Registered: December 05, 2002Reply With QuoteReport This Post



DRR Sportsman
posted Hide Post
The ET times MPH is called the “hook factor.” The 1320 number has no relationship to 1320’ in a quarter mile. Our dragsters are around 1335.

There’s more info at this link which says optimum hook factor is 1350. He starts talking about it on pg 4 #19: https://www.gregraven.org/hotw...nd-MPH-Equations.pdf
 
Posts: 710 | Location: Upstate NY | Registered: July 02, 2013Reply With QuoteReport This Post
DRR Sportsman
Picture of Mike Nitzsche
posted Hide Post
quote:
Originally posted by 183N:
The ET times MPH is called the “hook factor.” The 1320 number has no relationship to 1320’ in a quarter mile. Our dragsters are around 1335.

There’s more info at this link which says optimum hook factor is 1350. He starts talking about it on pg 4 #19: https://www.gregraven.org/hotw...nd-MPH-Equations.pdf


Interesting. My Cobalt is 6.94 and the roadster is 6.95.
 
Posts: 1364 | Location: Lansing,Mi | Registered: March 20, 2007Reply With QuoteReport This Post
DRR Pro
Picture of Don Higgins Crew Chief Pro Software
posted Hide Post
On 1/8th mile I use 1.90 as a multiplier.

4.45 @ 156 = 694 * 1.9 = 1318



Crew Chief Pro 7.980. It is not an evolution in Crew Chief Software, it is a Revolution in Crew Chief Software
Drag Racing Software and Professional Weather Stations(309) 688-2990

Visit us on the web at http://www.crewchiefpro.com

Are you a Producer or a Parasite?

Author of the book, "But Who Will Save The Children."
 
Posts: 1380 | Location: Bartonville Illinois | Registered: October 18, 2002Reply With QuoteReport This Post
  Powered by Social Strata  
 

DragRaceResults.Com    Bracket Talk    Bracket Talk Forum  Hop To Forum Categories  Tech Talk - by Abruzzi    What is typical rpm gain from 1/8 to 1/4 ?

© DragRaceResults.com 2024