DragRaceResults.Com    Bracket Talk    Bracket Talk Forum  Hop To Forum Categories  Tech Talk - by Abruzzi    Vega front springs
Go
New
Find
Notify
Tools
Reply
  
Vega front springs
 Login/Join
 
DRR Trophy
posted
I have a Vega backhalf car with a stock front clip. I'ts got a steel block aluminum head BBC in it. The car sits very low, I want to raise it a couple of inches. I tried to look up springs and couldn't find any. Any help would be appreciated. Thanks
 
Posts: 170 | Location: nj | Registered: February 14, 2005Reply With QuoteReport This Post
DRR Pro
Picture of CURTIS REED
posted Hide Post
Will any of these fit?

https://www.racingsprings.com/...il-over-springs.html



____________________________
2017 and 2018 Osage Casinos Tulsa Raceway Park No-Box Champion

2018 Div4 Goodguys Hammer award winner
 
Posts: 2921 | Location: KIEFER, OK. | Registered: August 17, 2007Reply With QuoteReport This Post
DRR Trophy
posted Hide Post
I called Moroso, they don't list anything, they suggested I measure the spring height, inner and outer diameter and needed the weight of the front of the car. They said they could come up with something. PAC would probably need the same info. Was hoping someone already went through this and had a part number. Thanks
 
Posts: 170 | Location: nj | Registered: February 14, 2005Reply With QuoteReport This Post
DRR Trophy
posted Hide Post
I think a Vega has the same suspension as a Monza. Rockauto lists a spring for a v-8 with a/c for a 76 Monza that is a different part number from the 4 cylinder spring. They list for approximately $50 a pair. Might be worth looking at.
 
Posts: 20 | Location: Pa. | Registered: August 12, 2017Reply With QuoteReport This Post
DRR Trophy
Picture of Mr498
posted Hide Post
I also have a Vega with an aluminum headed steel block BBC and stock front end. I used moog #5626. Free hight was 14.73 and I cut it to 10 in.[3.5 coils] to get 22.5 ride hight at center of fender. You can see how it sits in my avatar.
 
Posts: 81 | Location: at the track, pa | Registered: October 19, 2005Reply With QuoteReport This Post
DRR Trophy
posted Hide Post
Thanks for the responses. The Moog springs should work for what I want to do.
 
Posts: 170 | Location: nj | Registered: February 14, 2005Reply With QuoteReport This Post
DRR Trophy
posted Hide Post
67 through 69 camaro springs for big block. Cut to fit the hieght you want.
 
Posts: 31 | Location: arkansas | Registered: August 25, 2011Reply With QuoteReport This Post



  Powered by Social Strata  
 

DragRaceResults.Com    Bracket Talk    Bracket Talk Forum  Hop To Forum Categories  Tech Talk - by Abruzzi    Vega front springs

© DragRaceResults.com 2024