I have a Vega backhalf car with a stock front clip. I'ts got a steel block aluminum head BBC in it. The car sits very low, I want to raise it a couple of inches. I tried to look up springs and couldn't find any. Any help would be appreciated. Thanks

Will any of these fit?

https://www.racingsprings.com/...il-over-springs.html

I called Moroso, they don't list anything, they suggested I measure the spring height, inner and outer diameter and needed the weight of the front of the car. They said they could come up with something. PAC would probably need the same info. Was hoping someone already went through this and had a part number. Thanks

I think a Vega has the same suspension as a Monza. Rockauto lists a spring for a v-8 with a/c for a 76 Monza that is a different part number from the 4 cylinder spring. They list for approximately $50 a pair. Might be worth looking at.

I also have a Vega with an aluminum headed steel block BBC and stock front end. I used moog #5626. Free hight was 14.73 and I cut it to 10 in.[3.5 coils] to get 22.5 ride hight at center of fender. You can see how it sits in my avatar.

Thanks for the responses. The Moog springs should work for what I want to do.

67 through 69 camaro springs for big block. Cut to fit the hieght you want.