I would like to mount my delay box next to the shifter area on the passanger side of my s-10. Does anyone sell a mount or could someone post pics of theres so I can get some ideas.

I made this one

go here http://www.swracecars.com/sw-race-cars/catalog.aspx Click on page 2

www.quartermax.com

jeremy give me your e mail I just finished one and have pics not sure how to post here if someone can tell me I will try to post here

some one tell me how to post pics I am getting mad can not figure it out I have them on kodak easy share what do I do know

quote:

Originally posted by camaro77:
some one tell me how to post pics I am getting mad can not figure it out I have them on kodak easy share what do I do know

Email them to me and I will do it for you.
barracuda@friendlycity.net


To post pics on here, you need to open an account with an image hosting service,ie: image shack, photo bucket, etc., then you upload your pics to that service. You then can the img code to link the pics to this site.
It's much easier than it sounds.

Here's one I whipped up in a hurry...



I didn't build this one, but another example

smoke I emailed the pics thanks for the help

Mike what material is your driveshaft cover made from?
Sorry for the hijack.

I have a real simular drive shaft set up how ever there is no rule for the class that I run so I use a piece of 5 inch exhaust pipe for mine it fits the bickle loops great slice the tube and section in what you need

I have one of those also. It was made of steel thin but light...Could be a leg saver..

Camaro77 delaybox mount pics :