DragRaceResults.Com    Bracket Talk    Bracket Talk Forum  Hop To Forum Categories  Tech Talk - by Abruzzi    Belt drive fuel pump rear mount fuel cell
Page 1 2 
Go
New
Find
Notify
Tools
Reply
  
Belt drive fuel pump rear mount fuel cell
 Login/Join
 
DRR Trophy
posted
Just curious how many people use a belt drive pump with a rear mounted fuel cell in a door car?
Do you have any problems with it? do you need to go with a bigger pump if the cell
is in the back?
 
Posts: 114 | Location: ky | Registered: April 07, 2015Reply With QuoteReport This Post
DRR Sportsman
Picture of DLR
posted Hide Post
I used that set up on a 5.90 car with no issues.
 
Posts: 469 | Location: BENTON HARBOR, MI | Registered: August 29, 2007Reply With QuoteReport This Post
DRR Top Comp
Picture of Curly1
posted Hide Post
Fuel pump (Mechanical or Electric) is always better located behind and below the tank to have Gravity and G forces help feed it. Pumps work better at pumping the fuel than sucking. Restrictive fuel filter or clogged vent will make it worse. If possible you could put a small surge tank up front and feed it will electric pump.

Good thing is most mechanical pumps are much bigger than you need so still may do the job.

I believe Banjo has been running like that for years and his works well.

Bottom line is I would try to do it right and get tank up front but if you simply can not for some reason it will probably still work you just have less room for error.


https://postimg.cc/gallery/np3zpruo/
"Dunning-Kruger Effect"
-a type of Cognitive bias where people with little expertise or ability assume they have superior expertise or ability. This overestimation occurs as a result of the fact that they do not have enough knowledge to know they don't have enough knowledge.

Before you argue with someone ask yourself, "Is this person mentally mature enough to grasp the concept of a different perspective?" If not there is no point to argue.

4X NE2 CHAMPION. 2020 TDRA NE2 Champion
 
Posts: 3965 | Location: United States of Texas | Registered: April 02, 2011Reply With QuoteReport This Post
DRR Top Comp
Picture of wideopen231
posted Hide Post
Curly is ded on Rear mounted cell will work in lot of situations. It does not always.I burned up 2 80A pumps before moved cell to front and never had another issue after that. Personally would not run rear cell with belt driven pump

Most I have heard that it worked with had carb and not MFI.That might be a issue that makes difference.How ? beats hell out of me.




America home of free. Brought to you by 2nd amendment.
 
Posts: 4168 | Location: Greensboro NC | Registered: May 24, 2011Reply With QuoteReport This Post
DRR S/Pro
Picture of Lenny5160
posted Hide Post
I've been using a belt pump and rear cell (alky carb) on my 6.40/10.10 car for 20 years. It's been great.

As was mentioned, I don't think it would work with injection, mostly because you need a free-flowing return.


Tony Leonard
 
Posts: 3148 | Location: Inver Grove Heights, MN | Registered: March 18, 2004Reply With QuoteReport This Post
DRR S/Pro
Picture of Big Steve
posted Hide Post
I know lots of bracket racers that run a rear tank with belt drive pump with a alky carb and works great. It will not work well with MFI unless you run a electric pump and a front surge tank to feed the pump.
 
Posts: 2400 | Location: Moving back to the door side | Registered: April 30, 2010Reply With QuoteReport This Post
DRR Trophy
posted Hide Post
I did fail to mention it is a carb. 6.20 to 6.30 door car.

I have run belt drive pumps before, but it was on a dragster and a door car with front mount cell.

Been looking at apd pumps. Might give them a call and talk to them.
 
Posts: 114 | Location: ky | Registered: April 07, 2015Reply With QuoteReport This Post



DRR Sportsman
posted Hide Post
bo laws once told me that anything with a 60' slower than 1.320 a belt pump and rear tank would work. dont know how they come up with 1.32 60' but i can say that my car with a belt pump and rear tank my 60' was 1.32 to 1.34 (somewhere in there) and it worked fine. now i will say that on the leave the fuel pressure would spike to 0 but would come back once the car got moving.

ep
 
Posts: 757 | Location: dodging double wides... | Registered: November 28, 2007Reply With QuoteReport This Post
DRR Top Comp
posted Hide Post
I've seen a lot of people pull their hair out trying it.

The deeper you get $$, the more your ego blocks you from the light, and the deeper still you get $$$.

Waste of energy and resources $$.

Big variable too if it does *seem* to work.
 
Posts: 9398 | Location: Madeira Beach Fl. | Registered: June 12, 2018Reply With QuoteReport This Post
DRR Trophy
Picture of Luvtruck
posted Hide Post
quote:
Originally posted by ts393c:
I did fail to mention it is a carb. 6.20 to 6.30 door car.

I have run belt drive pumps before, but it was on a dragster and a door car with front mount cell.

Been looking at apd pumps. Might give them a call and talk to them.


Have several around here with belt drives and tank in the rear running 5.70s on alky
Just make sure the tank is higher than the pump.
 
Posts: 242 | Location: Vanceboro NC | Registered: February 24, 2009Reply With QuoteReport This Post
DRR Pro
Picture of HS professor
posted Hide Post
quote:
Have several around here with belt drives and tank in the rear running 5.70s on alky
Just make sure the tank is higher than the pump.



X2
I've seen plenty of 5 second cars with this combo. I personally use this setup on our truck but it only goes 6.20's/30's.
Pump is mounted low, tank is higher.
 
Posts: 1421 | Location: Monroe twp nj | Registered: December 05, 2005Reply With QuoteReport This Post
DRR S/Pro
Picture of banjo
posted Hide Post
I also run that setup, been 1.26 sixties to tripping the sixties with the rear tires and fuel pressure is always solid.

I know people are successful with the deadhead setups, but prefer the return style setup. It may not make much of a difference, but in my mind, the fuel is always moving, which would counter the g-forces.

Good luck


Bill Simpkins
74 Nova
SBC 406
3240 pounds
Speierracing heads

60 1.27 (10/16)
1/8 6.03@111 (10/16)
Best 9.87@131 on the rev limitor 1 Feb 2013


nova

quarterpanelview

wheelie

FTI Converter
www.speierracingheads.com

 
Posts: 1829 | Location: San Angelo | Registered: March 07, 2005Reply With QuoteReport This Post
DRR Sportsman
posted Hide Post
mine pump was a bo laws internal bypass. don't know if that makes any difference.

ep
 
Posts: 757 | Location: dodging double wides... | Registered: November 28, 2007Reply With QuoteReport This Post
DRR S/Pro
Picture of Lenny5160
posted Hide Post
quote:
Originally posted by pauley:
mine pump was a bo laws internal bypass. don't know if that makes any difference.

ep


x2


Tony Leonard
 
Posts: 3148 | Location: Inver Grove Heights, MN | Registered: March 18, 2004Reply With QuoteReport This Post



DRR S/Pro
Picture of The Bozman
posted Hide Post
i went 5.50's and 1.19 60 ft and never had a problem, 2800 lbs, 548 BB2xtra's with a BLP internal bypass pump.


Keeping the Socialists and NEO-LIBERALS at bay with FACTS one post at a time !!!

Freedom isn't free !!! Thank a veteran, they will actually appreciate it.
 
Posts: 2497 | Location: Gilmer, Texas | Registered: June 25, 2002Reply With QuoteReport This Post
DRR Trophy
posted Hide Post
I have talked to a few people that said they had problems with internal bypass style. They said they had better luck with the pump with regulators on them.

It just not possible to put a fuel cell up front in my car without making major changes. Not willing to do that to put a belt drive pump on. I can see where it could be harder for the pump to get the fuel up there with the cell being in the back but my cell is pretty high up in the rear, so it should gravity feed pretty good. It does do big wheelies sometimes, so that will have to be something I take into consideration.

Thanks for all the comments. I appreciate it.
 
Posts: 114 | Location: ky | Registered: April 07, 2015Reply With QuoteReport This Post
DRR Top Comp
Picture of Curly1
posted Hide Post
quote:
Originally posted by banjo:
I also run that setup, been 1.26 sixties to tripping the sixties with the rear tires and fuel pressure is always solid.

I know people are successful with the deadhead setups, but prefer the return style setup. It may not make much of a difference, but in my mind, the fuel is always moving, which would counter the g-forces.

Good luck


Absolutely return style regulator. It the OP is running a carb that also helps.


https://postimg.cc/gallery/np3zpruo/
"Dunning-Kruger Effect"
-a type of Cognitive bias where people with little expertise or ability assume they have superior expertise or ability. This overestimation occurs as a result of the fact that they do not have enough knowledge to know they don't have enough knowledge.

Before you argue with someone ask yourself, "Is this person mentally mature enough to grasp the concept of a different perspective?" If not there is no point to argue.

4X NE2 CHAMPION. 2020 TDRA NE2 Champion
 
Posts: 3965 | Location: United States of Texas | Registered: April 02, 2011Reply With QuoteReport This Post
DRR Sportsman
Picture of Dave Koehler
posted Hide Post
G forces and physics. Why fight it?

There is no pump, mechanical or electric that suck worth a darn. However they all can push a lot of fuel.

Carbs are the setups that Seem to work fine. It's not IF but when with a MFI you will get burned with a front pump and a rear tank

If you run a mechanical pump and must have a rear tank at least step up and move the pump to the rear using the Waterman cable drive.
https://aeromotiveinc.com/product/cable-drives/


Dave Koehler - Koehler Injection - http://www.koehlerinjection.com
Fuel Injection - Nitrous Charger - Nitrous Master Software - Balancing
99% of fuel injection problems are electric.
 
Posts: 351 | Location: Urbana, IL 61802 | Registered: December 03, 2003Reply With QuoteReport This Post
DRR S/Pro
Picture of Lenny5160
posted Hide Post
quote:
Originally posted by Dave Koehler:
G forces and physics. Why fight it?

There is no pump, mechanical or electric that suck worth a darn. However they all can push a lot of fuel.

Carbs are the setups that Seem to work fine. It's not IF but when with a MFI you will get burned with a front pump and a rear tank

If you run a mechanical pump and must have a rear tank at least step up and move the pump to the rear using the Waterman cable drive.
https://aeromotiveinc.com/product/cable-drives/


Maximum of 6 feet? That's not gonna make it to the rear.


Tony Leonard
 
Posts: 3148 | Location: Inver Grove Heights, MN | Registered: March 18, 2004Reply With QuoteReport This Post
DRR Pro
Picture of rusty
posted Hide Post
while at jerry haas race cars i saw a really nice comp car with a cable drive rear mounted mechanical pump,that will work.they didnt have room for a front cell.i would do a front cell if at all possible


honesty is the best policy,insanity is a better deffense
1.036, 6.16@ 224

 
Posts: 1390 | Location: texas | Registered: February 17, 2006Reply With QuoteReport This Post
  Powered by Social Strata Page 1 2  
 

DragRaceResults.Com    Bracket Talk    Bracket Talk Forum  Hop To Forum Categories  Tech Talk - by Abruzzi    Belt drive fuel pump rear mount fuel cell

© DragRaceResults.com 2024