DragRaceResults.Com    Bracket Talk    Bracket Talk Forum  Hop To Forum Categories  Tech Talk - by Abruzzi    Lifter tie bar removal
Go
New
Find
Notify
Tools
Reply
  
Lifter tie bar removal
 Login/Join
 
DRR Sportsman
posted
I have a set of lifters I would like to remove from the tie bar. The lifter is held to the tie bar with what looks to be a torx head screw in a rivet nut. I'm guessing they're loctited or similar. I tried to turn without heat and no go. Will try heat next. Anybody ever done this and have tips on removing and reassembling?
 
Posts: 928 | Location: my own little world | Registered: July 20, 2005Reply With QuoteReport This Post
DRR S/Pro
posted Hide Post
Don't be hesitant to call the OEM mfg., you don't want to turn this into a "failure analysis".


Illegitimi non carborundum
 
Posts: 2330 | Location: OKC, OK | Registered: February 15, 2008Reply With QuoteReport This Post
DRR Sportsman
posted Hide Post
Not sure what brand although I do know the pedigree. They are offset intake lifters with relatively low runs. I have a set of PBM/Morels but found one broke during assembly. Wanting to take two offset sets and make one non-offset to replace the broken morel.
 
Posts: 928 | Location: my own little world | Registered: July 20, 2005Reply With QuoteReport This Post
  Powered by Social Strata  
 

DragRaceResults.Com    Bracket Talk    Bracket Talk Forum  Hop To Forum Categories  Tech Talk - by Abruzzi    Lifter tie bar removal

© DragRaceResults.com 2024