Go
New
Find
Notify
Tools
Reply
  
SBC 23 * 407 ci
 Login/Join
 
DRR Sportsman
posted
Just finished a rebuild and some upgrades on 407 SBC .Dart 220 Raised Runner heads.13.9CR.Motown manifold with spacers to fit raised runner heads.Ran in on C12 VP made 744HP /588TQ.Switched to Rons terminator and Methanol.Made 750HP at 7200rpms 600# Torque.Engine is for footbrake bracket racing.Mech roller .904 Isky EZX lifters,Titanium valves Nextek 221441P springs,Vac pump.Bill C.


Checkered Flag Machine and Ceralli Competition Engines
checkeredflagmachine.net/
Racing engines and induction development
 
Posts: 110 | Location: Paterson N.J. | Registered: September 21, 2006Reply With QuoteReport This Post
DRR Sportsman
posted Hide Post
I was expecting a little more from the terminator. Do you have any average numbers from say, 4000-7200?
 
Posts: 476 | Location: here | Registered: February 12, 2006Reply With QuoteReport This Post
DRR Top Comp
Picture of Curly1
posted Hide Post
Very nice build with very good performance for a 407 cu. In. Always look forward to your builds and information.


https://postimg.cc/gallery/np3zpruo/
"Dunning-Kruger Effect"
-a type of Cognitive bias where people with little expertise or ability assume they have superior expertise or ability. This overestimation occurs as a result of the fact that they do not have enough knowledge to know they don't have enough knowledge.

Before you argue with someone ask yourself, "Is this person mentally mature enough to grasp the concept of a different perspective?" If not there is no point to argue.

4X NE2 CHAMPION. 2020 TDRA NE2 Champion
 
Posts: 3985 | Location: United States of Texas | Registered: April 02, 2011Reply With QuoteReport This Post
DRR Sportsman
Picture of Pro_ET
posted Hide Post
Nice, do those heads require shaft rockers?
 
Posts: 127 | Location: Div 3 | Registered: December 01, 2005Reply With QuoteReport This Post
DRR Sportsman
posted Hide Post
Dyno sheets and pics on YB.We used Jesel shaft rockers but Crane used to make a stud rocker with .225 offset that would work.Bill C.


Checkered Flag Machine and Ceralli Competition Engines
checkeredflagmachine.net/
Racing engines and induction development
 
Posts: 110 | Location: Paterson N.J. | Registered: September 21, 2006Reply With QuoteReport This Post
DRR Sportsman
posted Hide Post
Got some on track results ,At Island Dragway on 4-8-17 Camaro at 2900# ran 9.18 ET at 145MPH {on the chip]1.30 sixty ft,5.84at 118.28 in 1/8 th ,DA was 1100ft.Bill C.


Checkered Flag Machine and Ceralli Competition Engines
checkeredflagmachine.net/
Racing engines and induction development
 
Posts: 110 | Location: Paterson N.J. | Registered: September 21, 2006Reply With QuoteReport This Post
DRR Sportsman
posted Hide Post
quote:
Originally posted by BIG SPEED:
Got some on track results ,At Island Dragway on 4-8-17 Camaro at 2900# ran 9.18 ET at 145MPH {on the chip]1.30 sixty ft,5.84at 118.28 in 1/8 th ,DA was 1100ft.Bill C.


Gas or alcohol? Transbrake or footbrake?
 
Posts: 476 | Location: here | Registered: February 12, 2006Reply With QuoteReport This Post



DRR Sportsman
posted Hide Post
Alky ,Footbrake.Bill C.


Checkered Flag Machine and Ceralli Competition Engines
checkeredflagmachine.net/
Racing engines and induction development
 
Posts: 110 | Location: Paterson N.J. | Registered: September 21, 2006Reply With QuoteReport This Post
DRR S/Pro
Picture of The Bozman
posted Hide Post
quote:
Originally posted by BIG SPEED:
Got some on track results ,At Island Dragway on 4-8-17 Camaro at 2900# ran 9.18 ET at 145MPH {on the chip]1.30 sixty ft,5.84at 118.28 in 1/8 th ,DA was 1100ft.Bill C.


great numbers for a 23 degree small block


Keeping the Socialists and NEO-LIBERALS at bay with FACTS one post at a time !!!

Freedom isn't free !!! Thank a veteran, they will actually appreciate it.
 
Posts: 2497 | Location: Gilmer, Texas | Registered: June 25, 2002Reply With QuoteReport This Post
DRR Pro
Picture of Footloose
posted Hide Post
That is VERY impressive Not worthy clapping
 
Posts: 1921 | Location: in a van down buy the river | Registered: September 07, 2002Reply With QuoteReport This Post
DRR Sportsman
posted Hide Post
New best ET .8.99 at 149.37MPH 1.28 60ft.2870# 700ft DA .Last Sat 4-21-2018 at Island Dragway.Bill C.


Checkered Flag Machine and Ceralli Competition Engines
checkeredflagmachine.net/
Racing engines and induction development
 
Posts: 110 | Location: Paterson N.J. | Registered: September 21, 2006Reply With QuoteReport This Post
DRR Trophy
posted Hide Post
Could you tell us a little more about your combo? What cam is in this motor. That's a bad ass 407. What stroke is it. I know that's a dumb question but lots of ways to come up with cubic inches.
 
Posts: 31 | Location: arkansas | Registered: August 25, 2011Reply With QuoteReport This Post
DRR Pro
posted Hide Post
quote:
Originally posted by 66belair:
Could you tell us a little more about your combo? What cam is in this motor. That's a bad ass 407. What stroke is it. I know that's a dumb question but lots of ways to come up with cubic inches.


http://www.yellowbullet.com/fo...thread.php?t=2167562
 
Posts: 2447 | Location: 53056 | Registered: December 30, 2009Reply With QuoteReport This Post
DRR Trophy
Picture of Dragn
posted Hide Post
I tried to find that cam. Could you give a part number or specs.


Bob Seamons
 
Posts: 207 | Location: In the Garage | Registered: December 31, 2001Reply With QuoteReport This Post



DRR Sportsman
posted Hide Post
Cam is not a catalogue grind it is from the lobe list that we use to match valve events to specific combos.Specs over at YB.Engine has 4.157 bore and 3.750 stroke.6.00 in rod.Bill C.


Checkered Flag Machine and Ceralli Competition Engines
checkeredflagmachine.net/
Racing engines and induction development
 
Posts: 110 | Location: Paterson N.J. | Registered: September 21, 2006Reply With QuoteReport This Post
  Powered by Social Strata  
 


© DragRaceResults.com 2024