DragRaceResults.Com    Bracket Talk    Bracket Talk Forum  Hop To Forum Categories  Tech Talk - by Abruzzi    Crank Trigger Mounting
Page 1 2 3 4 
Go
New
Find
Notify
Tools
Reply
  
Crank Trigger Mounting
 Login/Join
 
DRR Sportsman
Picture of Da Shoe
posted
Trying to mount a crank trigger but the bracket hangs too low and gets in the way of my steering. Are there any other options for mounting the crank trigger.
 
Posts: 608 | Location: Da Swamp!!!! | Registered: October 30, 2006Reply With QuoteReport This Post
DRR Elite
posted Hide Post
Do you have room on the opposite side?


Foxtrot Juliet Bravo
 
Posts: 6354 | Location: Illinois | Registered: July 08, 2004Reply With QuoteReport This Post
DRR S/Pro
posted Hide Post
You can mount it pretty much anywhere you have room,,, just a custom bracket is required. You may also have to drill new holes in the wheel depending on where you locate the pickup to line up the wheel with the magnet! If you fix mount the pickup, (No slide mount as provided) then have the wheel holes slotted so you can both adjust and change the timing!
 
Posts: 2139 | Location: Tewksbury, MA,USA | Registered: November 03, 2000Reply With QuoteReport This Post
DRR Sportsman
Picture of Da Shoe
posted Hide Post
if I mount it with the standard mount then it will hit my steering linkage on both side. The motor has been moved back and its still a stock front chassis. I would have to flip the mount around and mount it on top side of the balancer. The magnetic wheel doesn't have any issues its just the standard mounting brackets that wont work, the pickup sensor would hit steering on both sides.
 
Posts: 608 | Location: Da Swamp!!!! | Registered: October 30, 2006Reply With QuoteReport This Post
DRR Elite
posted Hide Post
all this trouble for a crank trigger that does nothing for performance and only lightens your wallet. I didn't get the memo that stated it's a requirement on a bracket engine yet somehow my engine makes over 900HP with a distributor having the pickup in it and accelerates my Firebird every week to restricted ETs of 9.0x with deadly consistency and has accelerated my nearly 3200 lb. footbrake launched car to 8.72 @ 154mph. Must just be dumb luck. Uncontrollable Laugh





 
Posts: 13522 | Location: NJ | Registered: August 20, 2000Reply With QuoteReport This Post
DRR S/Pro
Picture of Lenny5160
posted Hide Post
quote:
Originally posted by Da Shoe:
if I mount it with the standard mount then it will hit my steering linkage on both side. The motor has been moved back and its still a stock front chassis. I would have to flip the mount around and mount it on top side of the balancer. The magnetic wheel doesn't have any issues its just the standard mounting brackets that wont work, the pickup sensor would hit steering on both sides.


You need to have a wheel magnet at the pickup when the rotor is pointing at #1. If you use a custom mount for the pickup, the current holes in the wheel may not give you that option in which case you'd need to drill or slot the wheel.


Tony Leonard
 
Posts: 3148 | Location: Inver Grove Heights, MN | Registered: March 18, 2004Reply With QuoteReport This Post
DRR Sportsman
Picture of Da Shoe
posted Hide Post
I have 2 crank triggers in the trailer. I have nothing else to tinker with on the car and was just looking for something to occupy my time. Yep probably not needed but I want it anyway. Anyone have any links to anyone who makes custom brackets etc.?
 
Posts: 608 | Location: Da Swamp!!!! | Registered: October 30, 2006Reply With QuoteReport This Post



DRR Elite
posted Hide Post
have at it but not probably, definitely not needed.
 
Posts: 13522 | Location: NJ | Registered: August 20, 2000Reply With QuoteReport This Post
DRR Sportsman
Picture of TomR
posted Hide Post
Crank triggers are not needed but definitely easier to work with in the long run. Once you set it, it never changes unless the pickup reverses polarity.

Can swap mine between engines and the timing never changes. As long as I install it in the same place. Most people mess it up by not indexing or marking 0 on the wheel.

Have changed intake gaskets and lifters in the staging lanes (in a dragster) and never had to use a timing light.

Bolt it on a new build and it is exactly where it needs to be for the first start up, every time.


72 Nova "Hooptie"
 
Posts: 734 | Location: Hanover, MD | Registered: June 20, 2016Reply With QuoteReport This Post
DRR S/Pro
posted Hide Post
quote:
Originally posted by Da Shoe:
I have 2 crank triggers in the trailer. I have nothing else to tinker with on the car and was just looking for something to occupy my time. Yep probably not needed but I want it anyway. Anyone have any links to anyone who makes custom brackets etc.?


You first need to figure out where you can put the pickup without hitting your obstructions! Then you can see if anyone has one but likely it will need a custom one off bracket.
 
Posts: 2139 | Location: Tewksbury, MA,USA | Registered: November 03, 2000Reply With QuoteReport This Post
DRR Elite
posted Hide Post
My distributor never changes once set and it too is exactly where it needs to be for the first start up, every time but that's neither here nor there. The point is in the OP's case, it's a custom install so why bother when there's no performance gain, no consistency, gain, no reliability gain and it cost more than a race ready distributor? All negatives.
 
Posts: 13522 | Location: NJ | Registered: August 20, 2000Reply With QuoteReport This Post
DRR Sportsman
Picture of TomR
posted Hide Post
Not gonna turn this into a train wreck and argue with you Ed.

OP wants a crank trigger, lets help him add one to the car whether you think he needs one or not.

PM sent


72 Nova "Hooptie"
 
Posts: 734 | Location: Hanover, MD | Registered: June 20, 2016Reply With QuoteReport This Post
DRR Elite
posted Hide Post
no train wrecks, just the facts and the truth. He don't need it and do so is a custom application so why bother?
 
Posts: 13522 | Location: NJ | Registered: August 20, 2000Reply With QuoteReport This Post
DRR Pro
Picture of CURTIS REED
posted Hide Post
quote:
Originally posted by 1320racer:
no train wrecks, just the facts and the truth. He don't need it and do so is a custom application so why bother?


I really am curious about this because you often comment over and over on threads such as this when someone does something you don't agree with. Why does it matter so much to you if they don't do as you would?



____________________________
2017 and 2018 Osage Casinos Tulsa Raceway Park No-Box Champion

2018 Div4 Goodguys Hammer award winner
 
Posts: 2910 | Location: KIEFER, OK. | Registered: August 17, 2007Reply With QuoteReport This Post



DRR Elite
posted Hide Post
Crank trigger is great.
As far as alignment, the msd's I believe all have a combination of h0les that give you options to cover just about any mounting. Between the options with the wheel and the range of the adjustable bracket, you should have overlap anywhere you need it without drilling or slotting holes.


Foxtrot Juliet Bravo
 
Posts: 6354 | Location: Illinois | Registered: July 08, 2004Reply With QuoteReport This Post
DRR S/Pro
posted Hide Post
quote:
Why does it matter so much to you if they don't do as you would?

In a word narcissist. A narcissist has an over whelming feeling he is always right and knows best. Happened across this explanation of narcissism a few days ago and immediately thought of Ed: "Narcissism is the pursuit of gratification from vanity or egotistic admiration of one's own attributes." Tell me I'm wrong.


Illegitimi non carborundum
 
Posts: 2324 | Location: OKC, OK | Registered: February 15, 2008Reply With QuoteReport This Post
DRR Elite
posted Hide Post
I asked the OP WHY bother when a crank trigger does NOTHING and in his application is a PITA that will require some kind of custom installation to which no one has offered him a viable solution yet.

That said, I couldn't care any less what anyone does with their car, their time, their $. I only offer advice based on 25 years of on track experience and I won't lose a moments sleep knowing the OP is struggling to install a crank trigger on his engine/car that again, will provide no performance gain, no consistency, gain, no reliability gain and it cost more than a race ready distributor.
 
Posts: 13522 | Location: NJ | Registered: August 20, 2000Reply With QuoteReport This Post
DRR Pro
Picture of Mike Beck
posted Hide Post
quote:
Originally posted by 1320racer:
I asked the OP WHY bother when a crank trigger does NOTHING and in his application is a PITA that will require some kind of custom installation to which no one has offered him a viable solution yet.

That said, I couldn't care any less what anyone does with their car, their time, their $. I only offer advice based on 25 years of on track experience and I won't lose a moments sleep knowing the OP is struggling to install a crank trigger on his engine/car that again, will provide no performance gain, no consistency, gain, no reliability gain and it cost more than a race ready distributor.


Sometimes it's just the challenge of making a change. Won't make his ride any faster. And he will learn to keep a spare pickup in the trailer, they are known to fail. I keep one for my buddies just in case they need it, and they have in the past.

I put an MSD crank trigger setup on both of my cars and had the brand new pickups sitting in the trailer since I use the Holley Hall Effect replacement pickup with my EFI setup. I needed it for the sequential injection, otherwise the old distributor and 6AL worked just fine going 8.8's @ 156! Smile
 
Posts: 1444 | Location: South River, NJ | Registered: June 19, 2007Reply With QuoteReport This Post
DRR Sportsman
Picture of Da Shoe
posted Hide Post
Ed could you do me a favor and just stop posting on the thread please. Not really interested in your opinion.
 
Posts: 608 | Location: Da Swamp!!!! | Registered: October 30, 2006Reply With QuoteReport This Post
DRR Top Comp
posted Hide Post
Do a search for megasquirt GT6 crank trigger. The picture that pops up will give you an idea of what I was thinking. I swear someone makes something similar for an MSD crank trigger. It goes over the top of the damper.


Clowns to the left of me, Jokers to the right. Here I am.......
 
Posts: 5297 | Location: stuck in the middle with you! | Registered: March 11, 2002Reply With QuoteReport This Post
  Powered by Social Strata Page 1 2 3 4  
 

DragRaceResults.Com    Bracket Talk    Bracket Talk Forum  Hop To Forum Categories  Tech Talk - by Abruzzi    Crank Trigger Mounting

© DragRaceResults.com 2024