DragRaceResults.Com    Bracket Talk    Bracket Talk Forum  Hop To Forum Categories  Tech Talk - by Abruzzi    Motorhome slides
Page 1 2 
Go
New
Find
Notify
Tools
Reply
  
Motorhome slides
 Login/Join
 
DRR Elite
posted
who has experience adjusting a Lippert thru frame, electric rack & pinion slide? This is on a Super C motorhome.

When I first got my Super C motorhome, the main slide struggled to come in for about the first 6", now it doesn't it doesn't move more than about an 1" coming in before stopping. There is no issue going out. The issue is getting in/up over this carpet border



I can crank it in by hand for those 6" and then it comes right in. Motor, controller and batteries are all new and the slides don't go out until the coach is leveled. Thinking the vertical adjustment is out of spec.

I have spoken to Lippert who wasn't very helpful on the phone, telling how to adjust vertical and horizontal which I learned from their You Tube videos but the arms in their videos aren't exactly the same as mine. They did assign my issue a case # for future reference. WhatEver

This message has been edited. Last edited by: 1320racer,
 
Posts: 13522 | Location: NJ | Registered: August 20, 2000Reply With QuoteReport This Post
DRR S/Pro
posted Hide Post
Ed

Although I don't have the same MH as you I ran into the same deal, what the videos showed did not match what I had. Talked to a local MH repair shop, he was buried so I took the time to look at the slide deal and figured it out. Mine had teflon pads that the slide road on and they have vertical adjustment bolts. My slide doesn't move up and down either but yours has to have some ramp deal that the slide rides on.

Good luck
 
Posts: 2141 | Location: Tewksbury, MA,USA | Registered: November 03, 2000Reply With QuoteReport This Post
DRR Elite
posted Hide Post
yea, can't find anyone that knows how or want to do it so like you, I'll figure it out and fix it eventually.

Thanks
 
Posts: 13522 | Location: NJ | Registered: August 20, 2000Reply With QuoteReport This Post
DRR S/Pro
posted Hide Post
May not be related but…. One of my slides was pretty slow to go in or out until recently it stooped. Wasnt the motor cause it was trying to but couldn’t. Come to find out one of my bearings went bad in a roller and locked it up…. After replacing all 4 while i had it out, it goes in and out much easier now…. I plan to check the others over the winter…


J.R. Baxter

""Fathom the hypocrisy of a Government that requires every citizen to prove they are insured ..but not everyone must prove they are a citizen."

2024 Miller
Rolla Competition Engines
ProCharger
Hoosier Tires
Abruzzi
 
Posts: 1513 | Location: Waxahachie | Registered: July 04, 2005Reply With QuoteReport This Post
DRR Elite
posted Hide Post
I thought of that and it may well be the issue. If the adjustments don’t resolve the issue, I will plan to change all the gear packs before next season.

That said, I just took all the measurements fir the slide/arms off a friends coach that is identical to mine.
 
Posts: 13522 | Location: NJ | Registered: August 20, 2000Reply With QuoteReport This Post
DRR S/Pro
Picture of Big Steve
posted Hide Post
Motorhome life
 
Posts: 2403 | Location: Moving back to the door side | Registered: April 30, 2010Reply With QuoteReport This Post
DRR Elite
posted Hide Post
yep
 
Posts: 13522 | Location: NJ | Registered: August 20, 2000Reply With QuoteReport This Post



DRR S/Pro
Picture of SCDIV1
posted Hide Post
My motorhome rental business customer has told me the 2 things he has the most trouble with are SLIDES and generators....

He has a fleet of them and never keeps them more than 2-3 years.....
 
Posts: 2733 | Location: Where ever I am, I'm here and it's me | Registered: March 15, 2007Reply With QuoteReport This Post
DRR Pro
posted Hide Post
Get your kid to get on FB several toterhome pages with help…
 
Posts: 1250 | Location: USA | Registered: December 04, 2008Reply With QuoteReport This Post
DRR Trophy
posted Hide Post
Lift the carpet on slide up my wife’s pusher drivers side slide was binding up at same point you’re describing when we got it I found a couple of pens and other debris down under carpet that was jamming it will it was trying to climb up cleaned it all out and has been fine her passenger side slide was struggling and that side needed a new motor but that one struggled all the way in
 
Posts: 386 | Location: Natick MA | Registered: November 15, 2017Reply With QuoteReport This Post
DRR Elite
posted Hide Post
WHOMP, I will.

Top, I'll check it out.

Thanks

Rich, I'm told even brand new motorhomes have troubles/issues. As a matter of fact, a friend recently took delivery of his one off, custom NRC motorhome built on a Peterbilt chassis. BIG $ and it too had issues and went back to NRC.
 
Posts: 13522 | Location: NJ | Registered: August 20, 2000Reply With QuoteReport This Post
DRR Trophy
posted Hide Post
That’s why New has warranty’s because they break just as much
 
Posts: 386 | Location: Natick MA | Registered: November 15, 2017Reply With QuoteReport This Post
DRR Pro
posted Hide Post
quote:
Originally posted by Top355x:
That’s why New has warranty’s because they break just as much
For a raggedy ass year…
 
Posts: 1250 | Location: USA | Registered: December 04, 2008Reply With QuoteReport This Post
DRR S/Pro
Picture of The Bozman
posted Hide Post
Does it change when you have the gen set running, I found that even with fully charged batteries mine works differently with the gen set running or the motor running. I don't know if it is how it is pulling on the drive batteries, when mine is slow I just hit the slave switch for all batteries to be tied together and it works fine. I also found that if you have a lot of extra weight on the slide it doesn't want to go in easy.


Keeping the Socialists and NEO-LIBERALS at bay with FACTS one post at a time !!!

Freedom isn't free !!! Thank a veteran, they will actually appreciate it.
 
Posts: 2497 | Location: Gilmer, Texas | Registered: June 25, 2002Reply With QuoteReport This Post



DRR Elite
posted Hide Post
Slides always go out/in with generator running and coach leveled.
 
Posts: 13522 | Location: NJ | Registered: August 20, 2000Reply With QuoteReport This Post
DRR Sportsman
Picture of Showtime296
posted Hide Post
One thing I was told (haven’t tried yet) was relocating the slide controller closer to the motor and make sure you have #10 power and ground wires. Mines better since i changed the motor and gearing to a slower ratio. I may do the controller move over the winter. But something you may want to look at.


Performance Glass
Meziere
Chassis Engineering
FTI converters
 
Posts: 258 | Location: Eattin' a Sammich | Registered: May 03, 2004Reply With QuoteReport This Post
DRR Elite
Picture of adv ET 266
posted Hide Post
Load the “Lippert now” App on you phone or tablet. Tons and tons of videos and help



2005 2000lb 4 link dragster
home brew 582 BBC Dart 355
1.058
2.98
4.629@149
6.094
7.310@185

 
Posts: 12149 | Location: 33463 | Registered: February 04, 2004Reply With QuoteReport This Post
DRR S/Pro
Picture of SCDIV1
posted Hide Post
quote:
Originally posted by 1320racer:
yea, can't find anyone that knows how or want to do it so like you, I'll figure it out and fix it eventually.

Thanks


Country Classic Auto Body
Rt 628 right off 565
near Sussex Airport
A big facility that works on and stores large motorhomes and trailers
Mike Sr. or Jr.
973-702-3333

I was there a few days ago and they MAY be able to do some jobs like slides

They are very specific about what the will and won't work on but are very well equipped...
 
Posts: 2733 | Location: Where ever I am, I'm here and it's me | Registered: March 15, 2007Reply With QuoteReport This Post
DRR Elite
posted Hide Post
Rich, thanks, I spoke to them last year about a different issue.

Paul, I’ve watched all their videos regarding slides and non address my specific issue or my specific slide arms/adjustments. I’ve also spoken to them several times and they are of no real help.
 
Posts: 13522 | Location: NJ | Registered: August 20, 2000Reply With QuoteReport This Post
DRR Pro
Picture of head gamez
posted Hide Post
quote:
Originally posted by 1320racer:
Rich, thanks, I spoke to them last year about a different issue.

Paul, I’ve watched all their videos regarding slides and non address my specific issue or my specific slide arms/adjustments. I’ve also spoken to them several times and they are of no real help.


I’ve found them to be a terrible company putting out terrible products. It seems that the bulk of the RV industry issues start out with their crappy products. Frames, slides, leveling systems etc. When a sub par assembly process starts with sub par parts, you end up with the RV industry. Lmao.

Build quality goes up with units like you have, but they still use Lipperts parts and it seems to be the weak point.


Mikey
 
Posts: 1706 | Location: In a Marriott near you! | Registered: February 10, 2006Reply With QuoteReport This Post
  Powered by Social Strata Page 1 2  
 

DragRaceResults.Com    Bracket Talk    Bracket Talk Forum  Hop To Forum Categories  Tech Talk - by Abruzzi    Motorhome slides

© DragRaceResults.com 2024