DragRaceResults.Com    Bracket Talk    Bracket Talk Forum  Hop To Forum Categories  Tech Talk - by Abruzzi    Troy Morgan - Larry Woodfin Super 10 project
Page 1 2 3 4 5 
Go
New
Find
Notify
Tools
Reply
  
Troy Morgan - Larry Woodfin Super 10 project
 Login/Join
 
DRR Pro
posted Hide Post
Looking Good Larry!

Scott
 
Posts: 1838 | Location: Illinois | Registered: August 20, 2000Reply With QuoteReport This Post
DRR Top Comp
posted Hide Post
Just messin with you a little bit. LOL


Clowns to the left of me, Jokers to the right. Here I am.......
 
Posts: 5298 | Location: stuck in the middle with you! | Registered: March 11, 2002Reply With QuoteReport This Post
DRR Pro
posted Hide Post
Larry, you posted that this is an electronics car. If using analog ignition, why not MSD 7330 7al3?

7al3 incorporates many of the features that you would need to add onto a 6al box that has only a rpm port. It also has 33% more spark output over a 6al.
 
Posts: 2446 | Location: 53056 | Registered: December 30, 2009Reply With QuoteReport This Post
DRR Pro
Picture of RacerVX54
posted Hide Post
quote:
Originally posted by Larry Woodfin:
One other note, the radiator will be mounted under the truck bed. Pics of that soon.


WHY?


"Just Shut Up and Race"

Brian Martin
Martin Racing
5.66 @121.55
 
Posts: 1385 | Location: Va.Beach .Va | Registered: August 03, 2005Reply With QuoteReport This Post
DRR Pro
Picture of CURTIS REED
posted Hide Post
quote:
Originally posted by RacerVX54:
quote:
Originally posted by Larry Woodfin:
One other note, the radiator will be mounted under the truck bed. Pics of that soon.


WHY?


Why hang weight out front if you don't have to? My radiator is in the trunk area of my roadster.



____________________________
2017 and 2018 Osage Casinos Tulsa Raceway Park No-Box Champion

2018 Div4 Goodguys Hammer award winner
 
Posts: 2916 | Location: KIEFER, OK. | Registered: August 17, 2007Reply With QuoteReport This Post
DRR S/Pro
Picture of XPS fan
posted Hide Post
quote:
Originally posted by CURTIS REED:
Why hang weight out front if you don't have to? My radiator is in the trunk area of my roadster.



Seems to work Smile


Congrats on your win at Radial Revenge in Tulsa.

Cool



.


NHRA Pro Stock..........now on a no CARB diet.
 
Posts: 2764 | Location: ohio | Registered: February 21, 2006Reply With QuoteReport This Post
DRR Pro
Picture of CURTIS REED
posted Hide Post
quote:
Originally posted by XPS fan:
quote:
Originally posted by CURTIS REED:
Why hang weight out front if you don't have to? My radiator is in the trunk area of my roadster.



Seems to work Smile


Congrats on your win at Radial Revenge in Tulsa.

Cool



.


Thanks Fred. Coolest trophy short of a Wally that I've ever gotten. Sorry for the detour Larry.



____________________________
2017 and 2018 Osage Casinos Tulsa Raceway Park No-Box Champion

2018 Div4 Goodguys Hammer award winner
 
Posts: 2916 | Location: KIEFER, OK. | Registered: August 17, 2007Reply With QuoteReport This Post



DRR Pro
posted Hide Post
In ref to the radiator location; the S-10 has limited room in front of the engine. Because of Ron's injection, a front mounted fuel cell is recommended. We juggled a small dragster style radiator and 3 gal cell round, trimmed the core support here and there, and still were not satisfied with the fit.

Just on a thought, Monte held it up under the bed and it was a natural fit. The near buy four-link frame rails provide easy attachment for mounting tabs.

Now we have plenty of room in front for plumbing and cell. Plenty of room under the bed for the radiator. Because of Ron's system and Methanol, I expect cooling will be just right.


Larry Woodfin



 
Posts: 1828 | Location: Kilgore TX | Registered: March 12, 2004Reply With QuoteReport This Post
DRR S/Pro
Picture of The Bozman
posted Hide Post
Larry,
I would consider having it in the bed by the cab. Under the bed you will run into all the issues with clogged fins on the radiator. remember how much dust, dirt, grime is on the frame rails, now this will be in all the fin area of the radiator. I am sure you could make a real nice mount up by the cab of the truck bed (think about the offroad vehicles that run in the desert). Just a suggestion. Also, there is really not a need for the front cell unless you are really planning on standing it up on the bumper for a long period of time.


Keeping the Socialists and NEO-LIBERALS at bay with FACTS one post at a time !!!

Freedom isn't free !!! Thank a veteran, they will actually appreciate it.
 
Posts: 2497 | Location: Gilmer, Texas | Registered: June 25, 2002Reply With QuoteReport This Post
DRR Pro
posted Hide Post
Valid comments for consideration, Thanks


Larry Woodfin



 
Posts: 1828 | Location: Kilgore TX | Registered: March 12, 2004Reply With QuoteReport This Post
DRR S/Pro
Picture of Big Steve
posted Hide Post
quote:
Originally posted by Larry Woodfin:
Valid comments for consideration, Thanks


And dont forget about the Motorplex rocks!
 
Posts: 2409 | Location: Moving back to the door side | Registered: April 30, 2010Reply With QuoteReport This Post
DRR Sportsman
Picture of rs72z
posted Hide Post
Very good point. With the injection it wont need a lot of airflow to keep cool anyway.


quote:
Originally posted by The Bozman:
Larry,
I would consider having it in the bed by the cab. Under the bed you will run into all the issues with clogged fins on the radiator. remember how much dust, dirt, grime is on the frame rails, now this will be in all the fin area of the radiator. I am sure you could make a real nice mount up by the cab of the truck bed (think about the offroad vehicles that run in the desert). Just a suggestion. Also, there is really not a need for the front cell unless you are really planning on standing it up on the bumper for a long period of time.
 
Posts: 206 | Location: texas | Registered: November 13, 2008Reply With QuoteReport This Post
DRR Sportsman
Picture of KWig
posted Hide Post
Great truck Larry. You guys do great work.


You have to put in the effort, to get anything out of it.
 
Posts: 736 | Location: Cumming Ga | Registered: January 07, 2007Reply With QuoteReport This Post
DRR Sportsman
posted Hide Post
I had a friend that had his radiator mounted in the bed between the front of bed and the wheel tubs. He had a full tonnaeu cover with louvers for hot air to escape. I don't remember how he got fresh air in. Cressman in PA built the truck and did a really nice job with the whole truck. He ran it on gas and Alky,and never had a problem with cooling running 9.40's with a SBC.

IMO, you can't go wrong with the cell up front in regards to fuel delivery. Also know that you might have to install a bar to protect it depending on where it's mounted to be legal.

I think I know the answer to the next question, but why is the toilet mounted backwards? Looking at the pic,SLE/throttle stop is my guess.
Or is it a Ford and you installed engine backwards? HMMMM



Cool
 
Posts: 619 | Location: Atco, NJ | Registered: March 14, 2002Reply With QuoteReport This Post



DRR Sportsman
Picture of Pro_ET
posted Hide Post
quote:
Originally posted by Larry Woodfin:
Super 10 progress report.

The engine is finished and installed. It includes;
*Dart SHP Pro block
*Dart Pro 1 aluminum heads by HVH
*Super Victor
*J E custom pistons for 13:1 + compression
*Ron's injection [Thanks to Scott Offerman] includes primer plus





Just curious, going with a zero pump? And what's with the backwards toilet?
 
Posts: 127 | Location: Div 3 | Registered: December 01, 2005Reply With QuoteReport This Post
DRR Pro
posted Hide Post
Good catch on the backward mount! We are installing a starting line controller and because of the closeness to the firewall the controller will be mounted pointing forward and the throttle cable will loop around and back into the pedal. I do this same install with carburated door cars.

The fuel pump is a billet upgrade recommended by Scott Offerman, I do not recall which pump. The system is all new Ron's per Scott's recommendation.


Larry Woodfin



 
Posts: 1828 | Location: Kilgore TX | Registered: March 12, 2004Reply With QuoteReport This Post
DRR S/Pro
Picture of The Bozman
posted Hide Post
Larry,
I just noticed, looks like you have a pretty big exhaust leak on the front drivers cylinder. Might want to put some pipe on that, or is that another "special I-20 speed trick"?


Keeping the Socialists and NEO-LIBERALS at bay with FACTS one post at a time !!!

Freedom isn't free !!! Thank a veteran, they will actually appreciate it.
 
Posts: 2497 | Location: Gilmer, Texas | Registered: June 25, 2002Reply With QuoteReport This Post
DRR Pro
posted Hide Post
Boz, that open port is for EGR clean air compliance. Gotta consider the carbon footprint.


Larry Woodfin



 
Posts: 1828 | Location: Kilgore TX | Registered: March 12, 2004Reply With QuoteReport This Post
DRR Pro
posted Hide Post
Work has progressed well with the Super 10. More pic and info soon. The engine has been fired and all systems are operating as expected. We will test at Texas Motorplex June 16.


Larry Woodfin



 
Posts: 1828 | Location: Kilgore TX | Registered: March 12, 2004Reply With QuoteReport This Post
DRR Pro
Picture of HS professor
posted Hide Post
quote:
More pic and info soon.



Sweet !!!! I'm right in the heat of battle building a kinda S10 "Hombre lol" . I need as many ideas as I can get !!! Cage is done and I just got a Suncoast fiberglass dash I have to mount.

Always enjoyed this build and it motivated me to build one.
 
Posts: 1421 | Location: Monroe twp nj | Registered: December 05, 2005Reply With QuoteReport This Post
  Powered by Social Strata Page 1 2 3 4 5  
 

DragRaceResults.Com    Bracket Talk    Bracket Talk Forum  Hop To Forum Categories  Tech Talk - by Abruzzi    Troy Morgan - Larry Woodfin Super 10 project

© DragRaceResults.com 2024