Looking to get o2 gauge to compare to my egt's. Wondering what you are using for o2 gauge when not running data recorder?

I sold a lot of these: Innovate MTX but found they were somewhat finicky.

Racepak Sportsman and O2 is $1240 - deduct the 10% December discount and you get $1116.

not to hijack the thread greg. but the instructions that came with mine said to wire the heater wires to battery? or should it be wire to a switched circuit?

quote:

Originally posted by DRB Motorsports:
not to hijack the thread greg. but the instructions that came with mine said to wire the heater wires to battery? or should it be wire to a switched circuit?

Switched side of the battery. The racepak will control the heater.

I have an Innovate LM2 for sale if you're interested

quote:

Originally posted by ActionRacingPhotos:

quote:

Originally posted by DRB Motorsports:
not to hijack the thread greg. but the instructions that came with mine said to wire the heater wires to battery? or should it be wire to a switched circuit?

Switched side of the battery. The racepak will control the heater.

Yup .

Do any of the gauges talked about other than race pak record. I would like to watch o2 but don't want to try to look at gauge when trying to judge the stripe. Be nice to be able to review after the run at the trailer.

should have mentioned its for alky.Wjile I know you can use gas scale,finding one with reading for alky would be nice. Probably ten times harder. going to call about AEM UEGO tomorrow.

Look into the Daytona Sensors Wego 111

LM2 will do gas or alky

quote:

Originally posted by CURTIS REED:
Look into the Daytona Sensors Wego 111

X2

you can configure the display to use any one of 6 scales (including methanol) or set your own.
I have 4 of the IIID duel units on the dyno and they just flat work and are accurate.

Joe