April 06, 2020, 07:12 PM
SLICKSTERmark williams 35 spline spool and strange axels
Help Guys, I have 35 spline strange axels in my 9" rear and have a chance to buy a complete drop in Mark Williams center section with 35 spline spool. Will the Strange axels fit the Mark Williams spool. Thanks
April 06, 2020, 07:16 PM
wideopen231Not 100% but don't think MW and strange axles and spool spline inter swap. I know on 40's they do but not 35's. I am sure if incorrect someone will point it out soon.LOL
April 06, 2020, 07:22 PM
Phil DeesThe axles will go in the spool, but the pressure angle is different. I think Strange will make 40 degree axles to fit Mark Williams spools.
April 06, 2020, 07:22 PM
TD3550I believe it is a different pitch on the spline the way i understood it on the 35. I could be wrong tho.
April 06, 2020, 10:57 PM
Will HarrisonThat depends on the spool. Mark Williams makes spools with "Strange" spline, "Moser" spline and their own spline. Besides being different angles on the actual spline, the location of the splines in the spool varies dramatically. In short, you would need the spools part number, and then would need to do some math to be sure.
April 07, 2020, 12:44 PM
TechI already told you. Just buy it!