Help Guys, I have 35 spline strange axels in my 9" rear and have a chance to buy a complete drop in Mark Williams center section with 35 spline spool. Will the Strange axels fit the Mark Williams spool. Thanks
|DRR Top Comp|
Not 100% but don't think MW and strange axles and spool spline inter swap. I know on 40's they do but not 35's. I am sure if incorrect someone will point it out soon.LOL
Your first mistake was thinking your opinion made a d a m n
America home of free. Brought to you by 2nd amendment.
The axles will go in the spool, but the pressure angle is different. I think Strange will make 40 degree axles to fit Mark Williams spools.
I believe it is a different pitch on the spline the way i understood it on the 35. I could be wrong tho.
That depends on the spool. Mark Williams makes spools with "Strange" spline, "Moser" spline and their own spline. Besides being different angles on the actual spline, the location of the splines in the spool varies dramatically. In short, you would need the spools part number, and then would need to do some math to be sure.
4.36 @ 159 so far.....
6.86 @ 198 trying for more......
533" single carb
235" Harrison 4-link
I already told you. Just buy it!
Why Do We Do This!
|Powered by Social Strata|