DragRaceResults.Com    Bracket Talk    Bracket Talk Forum  Hop To Forum Categories  Tech Talk - by Abruzzi    CHRYSLER GUYS STEP INSIDE
Go
New
Find
Notify
Tools
Reply
  
CHRYSLER GUYS STEP INSIDE
 Login/Join
 
DRR S/Pro
Picture of J178RED
posted
Need bearings for 360.... MS1266HGX , I know they are discontinued hoping some one has them setting around.


HAVE THEY CALLED US YET ? THEY HAVE!!!
 
Posts: 2697 | Location: OLD NICK OUT ON THE TRACK OR IN THE DESERT | Registered: March 09, 2010Reply With QuoteReport This Post
DRR S/Pro
Picture of David Covey
posted Hide Post
quote:
MS1266HGX

https://www.jegs.com/i/Clevite...5/MS1266HGX/10002/-1

Summit has full groove but NO extra clearance.

https://www.summitracing.com/p.../overview/make/dodge

You could have crank polished to get the extra clearance. Then you could use a standard type bearing.

Dave


"It is usually futile to try to talk facts and analysis to people who are enjoying a sense of moral superiority in their ignorance." -Thomas Sowell
 
Posts: 3303 | Location: American By Birth Texan By The Grace Of God  | Registered: April 29, 2004Reply With QuoteReport This Post
DRR S/Pro
Picture of J178RED
posted Hide Post
Thanks Dave, Not in stock at Jegs but polishing on crank may be a good fix


HAVE THEY CALLED US YET ? THEY HAVE!!!
 
Posts: 2697 | Location: OLD NICK OUT ON THE TRACK OR IN THE DESERT | Registered: March 09, 2010Reply With QuoteReport This Post
DRR S/Pro
Picture of David Covey
posted Hide Post
If you have access to a lathe you could do it yourself fairly easily. Rods would be a little more difficult unless you had a polisher to go with the lathe.

I'd hate to do it by hand without a lathe though.

Dave


"It is usually futile to try to talk facts and analysis to people who are enjoying a sense of moral superiority in their ignorance." -Thomas Sowell
 
Posts: 3303 | Location: American By Birth Texan By The Grace Of God  | Registered: April 29, 2004Reply With QuoteReport This Post
DRR Sportsman
Picture of 1355PRO
posted Hide Post
Go to Moparts.com and check out the classifieds. If there is nothing there join the website and post and ask if someone knows of some available... Wink


Eric Macchiaroli
S/R1355 80 Arrow

 
Posts: 473 | Location: Glenshaw PA | Registered: February 25, 2000Reply With QuoteReport This Post
DRR S/Pro
Picture of J178RED
posted Hide Post
Thanks guy's we found some old stock and they are on the way.....


HAVE THEY CALLED US YET ? THEY HAVE!!!
 
Posts: 2697 | Location: OLD NICK OUT ON THE TRACK OR IN THE DESERT | Registered: March 09, 2010Reply With QuoteReport This Post
  Powered by Social Strata  
 

DragRaceResults.Com    Bracket Talk    Bracket Talk Forum  Hop To Forum Categories  Tech Talk - by Abruzzi    CHRYSLER GUYS STEP INSIDE

© DragRaceResults.com 2024