Need bearings for 360.... MS1266HGX , I know they are discontinued hoping some one has them setting around.

quote:

MS1266HGX

https://www.jegs.com/i/Clevite...5/MS1266HGX/10002/-1

Summit has full groove but NO extra clearance.

https://www.summitracing.com/p.../overview/make/dodge

You could have crank polished to get the extra clearance. Then you could use a standard type bearing.

Dave

Thanks Dave, Not in stock at Jegs but polishing on crank may be a good fix

If you have access to a lathe you could do it yourself fairly easily. Rods would be a little more difficult unless you had a polisher to go with the lathe.

I'd hate to do it by hand without a lathe though.

Dave

Go to Moparts.com and check out the classifieds. If there is nothing there join the website and post and ask if someone knows of some available...

Thanks guy's we found some old stock and they are on the way.....