DragRaceResults.Com    Bracket Talk    Bracket Talk Forum  Hop To Forum Categories  Tech Talk - by Abruzzi    Car lays down after sixty feet in second gear
Go
New
Find
Notify
Tools
Reply
  
Car lays down after sixty feet in second gear
 Login/Join
 
DRR Trophy
posted
A friend of mine is trying to work some bugs out of a new car. The car shifts hard into second gear goes about sixty feet and lays down. He said the alcohol he is using is eighteen months old. I told him to drain the tank and put fresh fuel in to see if that solves the issue. Any help would be greatly appreciated.
 
Posts: 51 | Location: Kentucky | Registered: February 26, 2011Reply With QuoteReport This Post
DRR Trophy
Picture of Paul Dilley
posted Hide Post
Gday
Not much info there but i'll hazard a guess and say the bowls are running dry, not enough fuel supply or flow past the needle and seats.
Cheers
 
Posts: 42 | Location: gracemere, qld, Australia | Registered: February 10, 2007Reply With QuoteReport This Post
DRR Sportsman
posted Hide Post
quote:
Originally posted by Paul Dilley:
Gday
Not much info there but i'll hazard a guess and say the bowls are running dry, not enough fuel supply or flow past the needle and seats.
Cheers


X2


Denis LeBlanc

 
Posts: 469 | Location: Manchester, NH | Registered: February 03, 2006Reply With QuoteReport This Post
DRR Sportsman
Picture of TD3550
posted Hide Post
If he is using 18 month old fuel especially alcohol, what is his maintenance program. He run filters? tank sealed? foam in the tank?. Yearly carb clean and kit. The list is long. Stuff is corrosive. He run an additive?
 
Posts: 1409 | Location: Under a Truck | Registered: August 23, 2013Reply With QuoteReport This Post
DRR Trophy
posted Hide Post
I'll check with him today to see about his maintenance program. I know he runs additive in the alcohol because he gets that from me. The other stuff I'm not sure about, but I will ask today.
 
Posts: 51 | Location: Kentucky | Registered: February 26, 2011Reply With QuoteReport This Post
DRR Pro
Picture of CURTIS REED
posted Hide Post
18 months sitting sealed in a drum shouldn't be any different than 18 days sitting in a sealed drum.



____________________________
2017 and 2018 Osage Casinos Tulsa Raceway Park No-Box Champion

2018 Div4 Goodguys Hammer award winner
 
Posts: 2948 | Location: KIEFER, OK. | Registered: August 17, 2007Reply With QuoteReport This Post
DRR Trophy
posted Hide Post
If he doesn't own one, borrow a GoPro and mount it facing a fuel pressure gauge. Then make a pass and see what the fuel pressure does. If it goes to zero on the launch, the car could make it past the 60 ft. before it lays over with empty bowls.


Ben Rawe 383H
1965 Chevy II Nova
 
Posts: 226 | Location: Alexandria, KY | Registered: April 04, 2003Reply With QuoteReport This Post



DRR Top Comp
Picture of Curly1
posted Hide Post
I would suspect a fuel supply issue but since it is so easy to change carbs out I would try a different one to help narrow down issue.

Or you could listen to Ed and change your converter........


https://postimg.cc/gallery/np3zpruo/
"Dunning-Kruger Effect"
-a type of Cognitive bias where people with little expertise or ability assume they have superior expertise or ability. This overestimation occurs as a result of the fact that they do not have enough knowledge to know they don't have enough knowledge.

Before you argue with someone ask yourself, "Is this person mentally mature enough to grasp the concept of a different perspective?" If not there is no point to argue.

4X NE2 CHAMPION. 2020 TDRA NE2 Champion
 
Posts: 4019 | Location: United States of Texas | Registered: April 02, 2011Reply With QuoteReport This Post
DRR Top Comp
Picture of Curly1
posted Hide Post
As for the alcohol being 18 months old that should not be an issue at all. I have ran some thatvwas 8 years old and could not tell any difference from new drum.


https://postimg.cc/gallery/np3zpruo/
"Dunning-Kruger Effect"
-a type of Cognitive bias where people with little expertise or ability assume they have superior expertise or ability. This overestimation occurs as a result of the fact that they do not have enough knowledge to know they don't have enough knowledge.

Before you argue with someone ask yourself, "Is this person mentally mature enough to grasp the concept of a different perspective?" If not there is no point to argue.

4X NE2 CHAMPION. 2020 TDRA NE2 Champion
 
Posts: 4019 | Location: United States of Texas | Registered: April 02, 2011Reply With QuoteReport This Post
DRR Pro
Picture of CURTIS REED
posted Hide Post
quote:
Originally posted by Curly1:


Or you could listen to Ed and change your converter........


And later you are going to b1tch that he is messing up the thread. Stop



____________________________
2017 and 2018 Osage Casinos Tulsa Raceway Park No-Box Champion

2018 Div4 Goodguys Hammer award winner
 
Posts: 2948 | Location: KIEFER, OK. | Registered: August 17, 2007Reply With QuoteReport This Post
DRR Top Comp
posted Hide Post
quote:
Originally posted by CURTIS REED:
quote:
Originally posted by Curly1:


Or you could listen to Ed and change your converter........


And later you are going to b1tch that he is messing up the thread. Stop




oh yeah.....poor little ed is just misunderstood....


.
Dave



F J B

 
Posts: 4467 | Location: Earth | Registered: February 08, 2006Reply With QuoteReport This Post
DRR Trophy
posted Hide Post
seen a sprag in convertor do same thing
 
Posts: 6 | Location: nj | Registered: February 21, 2010Reply With QuoteReport This Post
DRR Trophy
posted Hide Post
My friend took the carb apart today and called and said the back bowl was dry. Cleaned everything and when he took the needle and seat out it was hung in the closed position. Changed needle and seat now the new one won't shut off. I suspect the float is saturated as being part of the problem, but he says the needle and seat work fine until he puts it in the bowl. He also says he can hear air going into the bowl. I'm stumped. I've been racing since the 1970s and have never encountered this kind of problem. Suggestions?
 
Posts: 51 | Location: Kentucky | Registered: February 26, 2011Reply With QuoteReport This Post
DRR Top Comp
Picture of Curly1
posted Hide Post
As I said in my first post I would change out carb to quickly determine what direction to go from there.


https://postimg.cc/gallery/np3zpruo/
"Dunning-Kruger Effect"
-a type of Cognitive bias where people with little expertise or ability assume they have superior expertise or ability. This overestimation occurs as a result of the fact that they do not have enough knowledge to know they don't have enough knowledge.

Before you argue with someone ask yourself, "Is this person mentally mature enough to grasp the concept of a different perspective?" If not there is no point to argue.

4X NE2 CHAMPION. 2020 TDRA NE2 Champion
 
Posts: 4019 | Location: United States of Texas | Registered: April 02, 2011Reply With QuoteReport This Post



DRR Pro
Picture of CURTIS REED
posted Hide Post
quote:
Originally posted by imakehp:

oh yeah.....poor little ed is just misunderstood....


Dave

I'm under no illusion of who and what he is but I have seen Beetlejuice. Uncontrollable Laugh

I just don't see the value of trying to derail a thread when you don't have too.

Curtis



____________________________
2017 and 2018 Osage Casinos Tulsa Raceway Park No-Box Champion

2018 Div4 Goodguys Hammer award winner
 
Posts: 2948 | Location: KIEFER, OK. | Registered: August 17, 2007Reply With QuoteReport This Post
DRR Sportsman
Picture of TomR
posted Hide Post
Remove the back (new) needle and seat, turn it upside down and tap the needle lightly with a hammer. This will help seat it into the brass and seal it.

Sometimes replacing the needle and seat causes more problems. I preferred seasoned ones myself, the older they are, the better they seal.


72 Nova "Hooptie"
 
Posts: 743 | Location: Hanover, MD | Registered: June 20, 2016Reply With QuoteReport This Post
DRR Trophy
posted Hide Post
I fought this same issue over a year ago, changed everything fuel related and it ended up being a sprag in the converter. Car would 60ft fine, run great through low gear and right after shift to high gear the pitch of the motor would change and it felt like someone hooked a trailer up to the car.
 
Posts: 152 | Location: St.Louis | Registered: May 09, 2005Reply With QuoteReport This Post
DRR Sportsman
posted Hide Post
quote:
Originally posted by Rawe Power:
If he doesn't own one, borrow a GoPro and mount it facing a fuel pressure gauge. Then make a pass and see what the fuel pressure does. If it goes to zero on the launch, the car could make it past the 60 ft. before it lays over with empty bowls.


If he notices the fuel pressure drop, he might want to check the vent. I have seen them do goofy things when the car is under hard acceleration.
 
Posts: 457 | Location: coquille,or | Registered: November 18, 2003Reply With QuoteReport This Post
  Powered by Social Strata  
 

DragRaceResults.Com    Bracket Talk    Bracket Talk Forum  Hop To Forum Categories  Tech Talk - by Abruzzi    Car lays down after sixty feet in second gear

© DragRaceResults.com 2024