Share |
DragRaceResults.Com    Bracket Talk    Bracket Talk Forum  Hop To Forum Categories  Tech Talk - by Abruzzi    Gasoline Dually powertrains **UPDATED**
Page 1 2 3 4 5 6 7 8 9 
Go
New
Find
Notify
Tools
Reply
  
Gasoline Dually powertrains **UPDATED**
 Login/Join
 
DRR Pro
Picture of Goob
posted Hide Post


"Despite the high cost of living, it remains popular."
Dave Cook
N375
 
Posts: 1174 | Location: Indy | Registered: November 21, 2008Reply With QuoteReport This Post
DRR Pro
Picture of Goob
posted Hide Post
12000 views just to see dumba$$ Eddie being Wrong again.

goob- Laughing Hard


"Despite the high cost of living, it remains popular."
Dave Cook
N375
 
Posts: 1174 | Location: Indy | Registered: November 21, 2008Reply With QuoteReport This Post
DRR Elite
Picture of 1320racer
posted Hide Post
thanks for playing but I said window sticker and invoice, not a piece of it don't be retard rietow with his partial time slips.


O'IT!

Offering 1st hand experience and advice based on 3 decades of on track proven performance

"if you guys are so broke dyck you can't buy USA made parts you need to stay the fuc at home that's the bottomline" ----Tim McAmis



 
Posts: 12042 | Location: NJ | Registered: August 20, 2000Reply With QuoteReport This Post
DRR Pro
Picture of Goob
posted Hide Post
quote:
Originally posted by 1320racer:
thanks for playing but I said window sticker and invoice, not a piece of it don't be retard rietow with his partial time slips.


Bwahahaha, nice attempt at a deflection, weasel. Laughing Hard

Anyone else here not satisfied with the documentation? Confused

That's my order, and my price.
I see that my math was off a little, it was only $6775.51 off MSRP.
I don't have the sticker, they remove that stuff at the dealer, numbnuts.

Go ahead and copy the order eddie, see what you get.

Doesn't matter anyway, YOU said I would have to pay sticker or over.

Would it be fair to say you've been owned again?

goob- too easy


"Despite the high cost of living, it remains popular."
Dave Cook
N375
 
Posts: 1174 | Location: Indy | Registered: November 21, 2008Reply With QuoteReport This Post
DRR Pro
Picture of Goob
posted Hide Post
Seems like numbnuts also proclaimed that GM would never build my truck, because my dumb a$$ ordered gasoline....
While GM had a massive STOP SALE order and recall on Duramax equipped trucks. Laughing Hard

goob- the dumba$$ never learns


"Despite the high cost of living, it remains popular."
Dave Cook
N375
 
Posts: 1174 | Location: Indy | Registered: November 21, 2008Reply With QuoteReport This Post
DRR Elite
Picture of 1320racer
posted Hide Post
again, I believe NOTHING on read on the forums and half of what I see with my own eyes and you did not post what I asked for therefore it's just another of many lies posted by several here.

Meanwhile, I inquired yesterday about ordering a 2023 Corvette. I'll need to wait at least 8 months and have to pay at least $25k over the window sticker aka "Market Adjustment"


O'IT!

Offering 1st hand experience and advice based on 3 decades of on track proven performance

"if you guys are so broke dyck you can't buy USA made parts you need to stay the fuc at home that's the bottomline" ----Tim McAmis



 
Posts: 12042 | Location: NJ | Registered: August 20, 2000Reply With QuoteReport This Post
DRR Elite
Picture of 1320racer
posted Hide Post
here's a nothing special 2022 2500HD Silverado RWD, powered 6.6L gas engine 30 minutes from my house. $20K over window

https://www.hawthornechevrolet...03e6bc9ba78ae4f9.htm


O'IT!

Offering 1st hand experience and advice based on 3 decades of on track proven performance

"if you guys are so broke dyck you can't buy USA made parts you need to stay the fuc at home that's the bottomline" ----Tim McAmis



 
Posts: 12042 | Location: NJ | Registered: August 20, 2000Reply With QuoteReport This Post



DRR Pro
Picture of Goob
posted Hide Post
quote:
Originally posted by 1320racer:
here's a nothing special 2022 2500HD Silverado RWD, powered 6.6L gas engine 30 minutes from my house. $20K over window

https://www.hawthornechevrolet...03e6bc9ba78ae4f9.htm


Well, you live in a libtard ****tthole, so I'm not surprised.

You're a perfect fit for a market adjusted Corvette. Buy it, moneybags.

goob- dumber and dumber


"Despite the high cost of living, it remains popular."
Dave Cook
N375
 
Posts: 1174 | Location: Indy | Registered: November 21, 2008Reply With QuoteReport This Post
DRR Elite
Picture of 1320racer
posted Hide Post
don't be a hater because of your poor life choices, it's never too late to make changes. Laughing very hard

that said, I found this nothing special 2023 dually like yours but with the dreaded diesel engine Laughing Hard about 3 hours from me

https://www.goldsteinbuick.com...RW-1GT49SEYXPF108361


O'IT!

Offering 1st hand experience and advice based on 3 decades of on track proven performance

"if you guys are so broke dyck you can't buy USA made parts you need to stay the fuc at home that's the bottomline" ----Tim McAmis



 
Posts: 12042 | Location: NJ | Registered: August 20, 2000Reply With QuoteReport This Post
DRR S/Pro
Picture of Mike Rietow
posted Hide Post
Poor Ed,,,, proven wrong again. What's new? Confused


https://youtu.be/FZ6zwnyDwUg

http://ottm.store

https://youtu.be/I8QWEaqeFRw

1996, 1998, 2001, 2003, 2005, 2006, 2008 Super Pro Champion Sunshine Dragstrip, Clearwater Florida
 
Posts: 8827 | Location: Madeira Beach Fl. | Registered: June 12, 2018Reply With QuoteReport This Post
DRR Pro
Picture of Goob
posted Hide Post
Meanwhile, here in flyover hilljack country, we have this Chevrolet dealer offering almost everything under sticker, and honoring all GM discount programs. (except ZO6 Corvettes)

https://www.stanleychevy.com/V...h=new&make=Chevrolet

You're a pathetic idiot, Eddie. Roll Eyes


"Despite the high cost of living, it remains popular."
Dave Cook
N375
 
Posts: 1174 | Location: Indy | Registered: November 21, 2008Reply With QuoteReport This Post
DRR Elite
Picture of 1320racer
posted Hide Post
goober you still ain't posted the full invoice and conveniently you don't have the window sticker meanwhile, I have gotten every window sticker on every new car I've purchased, 12 to date since my first in 1986, a corvette convertible Indy Pace Car.


O'IT!

Offering 1st hand experience and advice based on 3 decades of on track proven performance

"if you guys are so broke dyck you can't buy USA made parts you need to stay the fuc at home that's the bottomline" ----Tim McAmis



 
Posts: 12042 | Location: NJ | Registered: August 20, 2000Reply With QuoteReport This Post
DRR Sportsman
posted Hide Post
quote:
Originally posted by Goob:
Meanwhile, here in flyover hilljack country, we have this Chevrolet dealer offering almost everything under sticker, and honoring all GM discount programs. (except ZO6 Corvettes)

https://www.stanleychevy.com/V...h=new&make=Chevrolet

You're a pathetic idiot, Eddie. Roll Eyes


I see Stanley Chevy had a 2023 Silverado 3500 HD High Country. MSRP on ours was $85K something & they wanted 5-10K over that, we got it for 3K over.

Below is the truck with the "never will be!" bathroom package white trailer hooked up.



1980 Camaro
Taking the Best Working Small Tire Shyt Box & making it Greater Than Before! Big Grin
3050 lbs.
Pump Gas 434
Glide/5800 Stall
4.10 Rear Gears
Car Detuned for high 9s/low10s @ 133-34 mph
 
Posts: 1651 | Location: NV. | Registered: October 20, 2006Reply With QuoteReport This Post
DRR Pro
Picture of Goob
posted Hide Post
quote:
Originally posted by B KING:
quote:
Originally posted by Goob:
Meanwhile, here in flyover hilljack country, we have this Chevrolet dealer offering almost everything under sticker, and honoring all GM discount programs. (except ZO6 Corvettes)

https://www.stanleychevy.com/V...h=new&make=Chevrolet

You're a pathetic idiot, Eddie. Roll Eyes


I see Stanley Chevy had a 2023 Silverado 3500 HD High Country. MSRP on ours was $85K something & they wanted 5-10K over that, we got it for 3K over.

Below is the truck with the "never will be!" bathroom package white trailer hooked up.




Sweet!!!

Shut up Eddie, adults are talking here.

goob- Roll Eyes


"Despite the high cost of living, it remains popular."
Dave Cook
N375
 
Posts: 1174 | Location: Indy | Registered: November 21, 2008Reply With QuoteReport This Post



DRR Sportsman
Picture of Pro_ET
posted Hide Post
I typically refrain from posting; however, I've been in the market for a new truck to replace my Ram Cummins/Laramie and this thread caught my eye.
I like the 3500's (single axle in my case), so I went to https://www.chevrolet.com/ https://www.gmc.com/ and https://www.ramtrucks.com/?rid=ram& to build similar trucks using the build and price.

I've been watching these over the last year and noticed MSRP is coming down. Also, once you build one, you have the option to view inventory near you, when I do that, I notice some dealers are still pricing over MSRP, and some are pricing below MSRP. The kicker is that inventory is starting to build!

My brother-in-law has been a salesman at one of the largest dealers in my area for over 30 years, and has confirmed, inventory is catching up and they are starting to deal!

Having said that, when I use the "build and price" on the chevy site, I struggle to get MSRP over $60k on a Chevy long bed dually 3500 LT with the 6.6 gas, leather, camera's, 5th wheel prep, Convenience pkg, Convenience Pkg II, Durabed, heavy duty front camper springs, running boards, fog lamps, Cargo bed LED, Smoked LED roof marker lamps, sliding rear window, multi flex tailgate, spray on bed liner, 8 inch info HD touchscreen, 10 way power driver seat, headed seats/steering wheel, tilt/telescoping steering wheel, advanced trailering system, remote start, Home remote, theft deterrent, hitch guidance etc. posted below.

That's a pretty well loaded truck and MSRP is now $59,390.00, for $70k I could add the Duramax/Allison.

Also, I've been looking at Vette's and the same scenario is happening, once you do the online build you can click on view inventory and find the dealers that don't charge over MSRP as well as see the dealers that still charge a "dealer add on" (i.e., overcharge). After some test drives however, I've decided the Camaro 2SS 1le 10 speed auto is my choice.

There's some truth to both sides of the silly/grade school argument, in reality, both are outdated!

This message has been edited. Last edited by: Pro_ET,
 
Posts: 126 | Location: Div 3 | Registered: December 01, 2005Reply With QuoteReport This Post
DRR Elite
Picture of 1320racer
posted Hide Post
1. Inventory is not catching up. The big 3 dealers lots are largely empty of the cars and trucks most want here in the northeast.

2. No one that wants and can afford a new corvette buys a Camaro instead.

3. I’m interested in the Cadilac Blackwing. To get one is the same wait and Matket Adjustment as a corvette.


O'IT!

Offering 1st hand experience and advice based on 3 decades of on track proven performance

"if you guys are so broke dyck you can't buy USA made parts you need to stay the fuc at home that's the bottomline" ----Tim McAmis



 
Posts: 12042 | Location: NJ | Registered: August 20, 2000Reply With QuoteReport This Post
DRR Pro
Picture of CURTIS REED
posted Hide Post
quote:
Originally posted by 1320racer:
1. Inventory is not catching up. The big 3 dealers lots are largely empty of the cars and trucks most want here in the northeast.


There are many more consumer trucks 1/2, 3/4 and 1 ton on the lots around here now. Before about the only trucks were white fleet trucks. There is a dealership 1 mile from my place so I see their inventory all the time. Can't speak to why they wouldn't be catching up in the Northeast.



____________________________
2017 and 2018 Osage Casinos Tulsa Raceway Park No-Box Champion

2018 Div4 Goodguys Hammer award winner
 
Posts: 2361 | Location: KIEFER, OK. | Registered: August 17, 2007Reply With QuoteReport This Post
DRR Elite
Picture of 1320racer
posted Hide Post
Don’t know why but as I stated, the lots are largely empty of desirable cars and trucks. Doesn’t effect me because I order my vehicles and I’m not paying above window.


O'IT!

Offering 1st hand experience and advice based on 3 decades of on track proven performance

"if you guys are so broke dyck you can't buy USA made parts you need to stay the fuc at home that's the bottomline" ----Tim McAmis



 
Posts: 12042 | Location: NJ | Registered: August 20, 2000Reply With QuoteReport This Post
DRR Pro
posted Hide Post
Inventory on anything 3/4 ton or heavier is not getting caught up here. My brother in law sells truck bodies and I was just at my best friends farm this past weekend. F350 and above will have a few week window to order and the wait time will be 16-18 mos. Once that window closes there will be no ordering anything F350 and up.. The farmer has 2 new tractor trailers on order and the wait time is at least a year and he has not gotten 3 F550 trucks he ordered a year ago. He was able to buy 3 new corn harvesters ($600k) each and got them this year.

I've never bought a new vehicle and not gotten the window sticker either.

I sell new lawn equipment. I'm just getting inventory that I ordered a year ago. There is no projection of when inventory will get caught up but they are telling us it won't be in 2023. Stihl has carbs that are made in the Ukraine. So any model with those carbs will not be available or they need to find a new carb manufacturer.

This message has been edited. Last edited by: T172JR,
 
Posts: 1612 | Location: UsA | Registered: October 30, 2004Reply With QuoteReport This Post
DRR Elite
Picture of 1320racer
posted Hide Post
T127JR...KNOWS!


O'IT!

Offering 1st hand experience and advice based on 3 decades of on track proven performance

"if you guys are so broke dyck you can't buy USA made parts you need to stay the fuc at home that's the bottomline" ----Tim McAmis



 
Posts: 12042 | Location: NJ | Registered: August 20, 2000Reply With QuoteReport This Post
  Powered by Social Strata Page 1 2 3 4 5 6 7 8 9  
 

DragRaceResults.Com    Bracket Talk    Bracket Talk Forum  Hop To Forum Categories  Tech Talk - by Abruzzi    Gasoline Dually powertrains **UPDATED**

© DragRaceResults.com 2023