Page 1 2 
Go
New
Find
Notify
Tools
Reply
  
Pit Mats
 Login/Join
 
DRR S/Pro
Picture of Big Steve
posted
Anyone using them? how are they holding up?
 
Posts: 2427 | Location: Moving back to the door side | Registered: April 30, 2010Reply With QuoteReport This Post
DRR S/Pro
Picture of "The Bender"
posted Hide Post
Got mine from Good Vibrations 10x30, it's awesome. Had it two years, not a rip or tear. It's had gas, oil and alcohol spilled on it with no damage. They are HEAVY!

This message has been edited. Last edited by: "The Bender",


272" Spitzer
540 Chevy
The Blower Shop XR1
FTI XPM Series Converter
FTI Level 6 Powerglide
3.69@199
.916 60'

2017 Bradenton Heads Up Madness
Open Outlaw Champ

2018 PDRA T/D #5
2019 PDRA T/D #2

2020 Retired From T/D Competition....

2020 Bradenton NMCA Hemi Shootout Winner

2021 getting back into bracket racing with a Gen3 Hemi powered 87 Cutlass.
 
Posts: 3100 | Location: Yes | Registered: July 08, 2009Reply With QuoteReport This Post
DRR S/Pro
Picture of Big Steve
posted Hide Post
How small can it be folded to for storage?
 
Posts: 2427 | Location: Moving back to the door side | Registered: April 30, 2010Reply With QuoteReport This Post
DRR S/Pro
Picture of "The Bender"
posted Hide Post
My 10x30 folds up to approximately to 2 1/2' x 2 1/2'


272" Spitzer
540 Chevy
The Blower Shop XR1
FTI XPM Series Converter
FTI Level 6 Powerglide
3.69@199
.916 60'

2017 Bradenton Heads Up Madness
Open Outlaw Champ

2018 PDRA T/D #5
2019 PDRA T/D #2

2020 Retired From T/D Competition....

2020 Bradenton NMCA Hemi Shootout Winner

2021 getting back into bracket racing with a Gen3 Hemi powered 87 Cutlass.
 
Posts: 3100 | Location: Yes | Registered: July 08, 2009Reply With QuoteReport This Post
DRR S/Pro
Picture of "The Bender"
posted Hide Post
In my previous post it said I had it two tears it was supposed to say 2 years. Damn autocorrect....


272" Spitzer
540 Chevy
The Blower Shop XR1
FTI XPM Series Converter
FTI Level 6 Powerglide
3.69@199
.916 60'

2017 Bradenton Heads Up Madness
Open Outlaw Champ

2018 PDRA T/D #5
2019 PDRA T/D #2

2020 Retired From T/D Competition....

2020 Bradenton NMCA Hemi Shootout Winner

2021 getting back into bracket racing with a Gen3 Hemi powered 87 Cutlass.
 
Posts: 3100 | Location: Yes | Registered: July 08, 2009Reply With QuoteReport This Post
DRR S/Pro
Picture of Lenny5160
posted Hide Post
A friend of mine recently discovered that roadside billboards are printed on what are basically heavy tarps. He found a source and gave me one.

It's 10 x 32, IIRC. I had to install my own grommets, which are cheap and easy to do.

I just stumbled across a website that sells them. I see that they are local to me. Maybe where my buddy found them, but I promise I'm not affiliated!

http://www.billboardtarps.com

Here is my pit a couple weeks ago:



Tony Leonard
 
Posts: 3159 | Location: Inver Grove Heights, MN | Registered: March 18, 2004Reply With QuoteReport This Post
DRR Pro
Picture of TORQIN
posted Hide Post
I have had an original pit mat 12X40 since 2013...in 5 years with pro-jacks, scooter burnouts, a lil whiskey spilled...IT is in great shape and makes a big difference when having to work on the car and especially in the grass pit areas.
 
Posts: 1754 | Location: Houston, Tx. | Registered: November 27, 2008Reply With QuoteReport This Post



DRR Sportsman
posted Hide Post
quote:
Originally posted by Lenny5160:
A friend of mine recently discovered that roadside billboards are printed on what are basically heavy tarps. He found a source and gave me one.

It's 10 x 32, IIRC. I had to install my own grommets, which are cheap and easy to do.

I just stumbled across a website that sells them. I see that they are local to me. Maybe where my buddy found them, but I promise I'm not affiliated!

http://www.billboardtarps.com

Here is my pit a couple weeks ago:



I use the old billboard mats also, work great and are really cheap.


Jason McLawhorn
Greenville, NC
1955 Chevy

 
Posts: 476 | Location: Greenville, North Carolina | Registered: March 28, 2007Reply With QuoteReport This Post
DRR Sportsman
posted Hide Post
How thick (mils) are the ones you guys are using?

Anybody ever tried to use one as a trailer floor covering? I have rubber coin that I'm not extremely fond of right now.
 
Posts: 928 | Location: my own little world | Registered: July 20, 2005Reply With QuoteReport This Post
DRR S/Pro
Picture of Lenny5160
posted Hide Post
quote:
Originally posted by BJs Wild Ride:
How thick (mils) are the ones you guys are using?


I'm pretty sure mine is 11. I've only used it at one event so I can't speak to durability.


Tony Leonard
 
Posts: 3159 | Location: Inver Grove Heights, MN | Registered: March 18, 2004Reply With QuoteReport This Post
DRR Sportsman
Picture of sc4087
posted Hide Post
quote:
Originally posted by Lenny5160:
A friend of mine recently discovered that roadside billboards are printed on what are basically heavy tarps. He found a source and gave me one.

It's 10 x 32, IIRC. I had to install my own grommets, which are cheap and easy to do.

I just stumbled across a website that sells them. I see that they are local to me. Maybe where my buddy found them, but I promise I'm not affiliated!

http://www.billboardtarps.com



I'm gonna try one. a 12x39 for $37 ? I've wasted $40 on worse stuff before. I'll let you guys know how it works out


Mike Greene




 
Posts: 509 | Location: Burleson, TX | Registered: March 23, 2007Reply With QuoteReport This Post
DRR Pro
Picture of CURTIS REED
posted Hide Post
I bought one from Billboard Tarps. 14x23 $43.91 to my door. I’ll be going to a track next month that I have to park on grass and dirt and if I only use it at that track it will be well worth it. Turndowns on my roadster sure stir up a mess.

Curtis



____________________________
2017 and 2018 Osage Casinos Tulsa Raceway Park No-Box Champion

2018 Div4 Goodguys Hammer award winner
 
Posts: 2944 | Location: KIEFER, OK. | Registered: August 17, 2007Reply With QuoteReport This Post
DRR Sportsman
Picture of suprodn
posted Hide Post
I use these 10x40 used same one for 6 years on my second one now. Ordered 2 six years ago and decided to give original to a fellow racer and break out the nes one I had been hauling around for 6 years. Like the 40 foot can tarp from end of tailgate to front of trailer with one tarp.

https://www.tarpsonline.com/tarps/silver.aspx
 
Posts: 63 | Location: Watchn my motor go boom on the dyno | Registered: April 04, 2009Reply With QuoteReport This Post
DRR Top Comp
Picture of wideopen231
posted Hide Post
quote:
Originally posted by CURTIS REED:
I bought one from Billboard Tarps. 14x23 $43.91 to my door. I’ll be going to a track next month that I have to park on grass and dirt and if I only use it at that track it will be well worth it. Turndowns on my roadster sure stir up a mess.

Curtis
Wait a minute! you mean you work on a bracket car? I hear you never have to work on bracket car at the track. Have been LMAO at that one for while.

One question on used bill board tarps,how do you know whats going to be on them or are they just black?




America home of free. Brought to you by 2nd amendment.
 
Posts: 4185 | Location: Greensboro NC | Registered: May 24, 2011Reply With QuoteReport This Post



DRR S/Pro
Picture of Big Steve
posted Hide Post
I bought a 10x30 from Pit Mat. it weighs 75lbs. Hopefully it holds up to the dirt and rock we have to park in at the Motorplex national.
 
Posts: 2427 | Location: Moving back to the door side | Registered: April 30, 2010Reply With QuoteReport This Post
DRR S/Pro
posted Hide Post
quote:
Originally posted by Big Steve:
I bought a 10x30 from Pit Mat. it weighs 75lbs. Hopefully it holds up to the dirt and rock we have to park in at the Motorplex national.


After borrowing torqins a couple years ago I bought a 10-20 and it has help up very well, no tears at all


J.R. Baxter

""Fathom the hypocrisy of a Government that requires every citizen to prove they are insured ..but not everyone must prove they are a citizen."

2024 Miller
Rolla Competition Engines
ProCharger
Hoosier Tires
Abruzzi
 
Posts: 1517 | Location: Waxahachie | Registered: July 04, 2005Reply With QuoteReport This Post
DRR Pro
Picture of CURTIS REED
posted Hide Post
quote:
Originally posted by wideopen231:
quote:
Originally posted by CURTIS REED:
I bought one from Billboard Tarps. 14x23 $43.91 to my door. I’ll be going to a track next month that I have to park on grass and dirt and if I only use it at that track it will be well worth it. Turndowns on my roadster sure stir up a mess.

Curtis
Wait a minute! you mean you work on a bracket car? I hear you never have to work on bracket car at the track. Have been LMAO at that one for while.

One question on used bill board tarps,how do you know whats going to be on them or are they just black?


Who said I was working on it? The only reason I worked on it in the last month is because I slowed it down .900 for a race last weekend and have to put it back to normal for next weekend. You can laugh if you want but I race to have fun not another full time job. I've only won 5 races this year so maybe I need to start pulling the heads at the track. Didn't think of that

The one they sent me is white with lettering on one side. I have no idea yet what it says and didn't know what they would send. I haven't unrolled it yet to see but I assume the back is black. I am going to put grommets in the corners of it this weekend so I can post back later.

Curtis



____________________________
2017 and 2018 Osage Casinos Tulsa Raceway Park No-Box Champion

2018 Div4 Goodguys Hammer award winner
 
Posts: 2944 | Location: KIEFER, OK. | Registered: August 17, 2007Reply With QuoteReport This Post
DRR Top Comp
Picture of wideopen231
posted Hide Post
You said turndowns and I read teardowns ,too many years yanking heads and pan every run or so I guess.

Don't laugh at guys not tearing into motor ten time weekend.Just thats part I enjoy and not a job it is relaxing to be in trash. Yea I get the ironic part of that.

Pit mats are needless to say a must for me.




America home of free. Brought to you by 2nd amendment.
 
Posts: 4185 | Location: Greensboro NC | Registered: May 24, 2011Reply With QuoteReport This Post
DRR Trophy
Picture of sst5167
posted Hide Post
I rarely have the need for a pit mat because most of the tracks we run at have very nice asphalt. So spending hundreds of dollars on a heavy pit mat doesn't seem necessary to me. But I will be running the national event at the Texas Motorplex, and have heard their pit spots can be quite messy. I like the idea of the light weight billboard tarps. Hope I have enough time to get one here before I have to leave! Thanks for the good info Tony.


Mike Boehner
 
Posts: 92 | Location: Lake Havasu City, AZ | Registered: January 19, 2011Reply With QuoteReport This Post
DRR Pro
Picture of CURTIS REED
posted Hide Post
quote:
Originally posted by sst5167:
I rarely have the need for a pit mat because most of the tracks we run at have very nice asphalt. So spending hundreds of dollars on a heavy pit mat doesn't seem necessary to me. But I will be running the national event at the Texas Motorplex, and have heard their pit spots can be quite messy. I like the idea of the light weight billboard tarps. Hope I have enough time to get one here before I have to leave! Thanks for the good info Tony.


Was just at the Motorplex for the first time racing last weekend. I think my car weighed a few pounds more with all the pea gravel my tires were throwing into the car. It rained every day a little so some of the spots in the gravel were kinda muddy (right where I parked of course). If you get parked out there it can be a bit messy. Had a ball and not running the track down at all though I would go back in a heartbeat.

Curtis



____________________________
2017 and 2018 Osage Casinos Tulsa Raceway Park No-Box Champion

2018 Div4 Goodguys Hammer award winner
 
Posts: 2944 | Location: KIEFER, OK. | Registered: August 17, 2007Reply With QuoteReport This Post
  Powered by Social Strata Page 1 2  
 


© DragRaceResults.com 2024