Bracket Talk
Elite Chassis
April 11, 2022, 10:15 AM
sc4087Elite Chassis
What's that huge ipad looking calculator thing on the left of the dash?
Mike Greene
April 11, 2022, 10:40 AM
Buckyquote:
Originally posted by sc4087:
What's that huge ipad looking calculator thing on the left of the dash?
What page is the picture?
Foxtrot Juliet Bravo
April 11, 2022, 10:46 AM
"The Bender"quote:
Originally posted by sc4087:
What's that huge ipad looking calculator thing on the left of the dash?
Navigation/GPS.............
272" Spitzer
540 Chevy
The Blower Shop XR1
FTI XPM Series Converter
FTI Level 6 Powerglide
3.69@199
.916 60'
2017 Bradenton Heads Up Madness
Open Outlaw Champ
2018 PDRA T/D #5
2019 PDRA T/D #2
2020 Retired From T/D Competition....
2020 Bradenton NMCA Hemi Shootout Winner
2021 getting back into bracket racing with a Gen3 Hemi powered 87 Cutlass.
April 11, 2022, 11:21 AM
1320racerNo navigation but it does have a horn and backup lights.
Car w/driver, race ready weighs 2026 lbs. with a cast iron block 582.
April 11, 2022, 11:30 AM
racerdude2054quote:
Originally posted by sc4087:
What's that huge ipad looking calculator thing on the left of the dash?
The biondo delay box?
April 11, 2022, 12:12 PM
Joneszquote:
Originally posted by 1320racer:
No navigation but it does have a horn and backup lights.
Car w/driver, race ready weighs 2026 lbs. with a cast iron block 582.
I hope he is a very large driver for that weight..
April 11, 2022, 12:17 PM
1320racer230 lbs.
April 11, 2022, 01:45 PM
1320racerSteve, just for clarity, Kevin’s car was an Undercover that was front halved and back halved by Elite.
April 11, 2022, 03:07 PM
Big SteveInteresting, Kevin did not tell me that when I talked to him about it. Only that it took about a year to get it done. That explains the Undercover blow plate. I know he was having some wheel stand issues and came over and compared engine angles to mine and said his is about 1.5* higher in the front then mine so that could be a contributing factor.
April 11, 2022, 07:15 PM
rustyno he put the undercover plate on for airflow to the procharger.i am reasonably positive it is all new elite
honesty is the best policy,insanity is a better deffense
1.036, 6.16@ 224
April 11, 2022, 07:36 PM
1320racerRusty, it’s not, I spoke to Bill Frederick. That said, the driver’s compartment is all that remains of the original frame. The carbon body along with carbon dash is also original Undercover, as is the rear housing along with other components.
April 11, 2022, 08:10 PM
rustyokie dokie
honesty is the best policy,insanity is a better deffense
1.036, 6.16@ 224
April 11, 2022, 08:26 PM
1320racerthe give away was the carbon body, Bill doesn't yet offer a carbon body on his Elite cars.
September 08, 2022, 03:28 PM
1320racerCongrats to Matt Schell for his runner up in Wednesday’s American/Racetech dragster shootout at the summer fling at National Trails Raceway in his new Elite dragster I featured here. This is Matt’s 1st season in a big car. He also went deep yesterday in the $15k race.
https://www.facebook.com/watch...NK-UNK-IOS_GK0T-GK1CSeptember 13, 2022, 11:11 AM
topd1332Looks like he is getting a new american
September 13, 2022, 11:19 AM
1320racerwell he won the American chassis in the dragster shootout.
September 14, 2022, 12:11 PM
topd1332as u know a chassis is far away from a complete car
September 14, 2022, 01:24 PM
1320racerAbout $50k from the complete plumbed and wired roller he will have built.
September 14, 2022, 05:23 PM
TonyB6255quote:
Originally posted by 1320racer:
well he won the American chassis in the dragster shootout.
I bought the Race Tech that the winner took. It's due to be built in Jan and I am waiting for a quote on levels of finishing. At a minimum, I am having them wire and plumb it for brakes, throttle/chute cables etc...
