December 07, 2019, 04:08 PM
62GalaxieSteel braided rubber or PTFE for alky?
Changing to alky and some people have told me PTFE is the ONLY way because alcohol will eat rubber EVENTUALLY. On the other hand, I have a friend that has used the braided rubber for many years without problems. He also puts in a top lube for each 5 gallons of alky. If I change to PTFE I'll need to buy all new fittings because the braided steel stuff will not work with PTFE. Any advice appreciated. Thanks.
December 07, 2019, 04:46 PM
CURTIS REEDThere isn’t a better way to go than PTFE. WITH That said I couldn’t tell you how old my ss braided rubber fuel line is, it came on the car. I have been using it with alcohol since 2005. I have considered changing over to PTFE also but I keep finding other things to spend the money on. My 2 cents.
December 07, 2019, 04:59 PM
Curly1It is hard to say I have used several different brands of stainless braided rubber hose. Some lasted for many years with no problems others were crumbling in one year. I THINK the Russel hose was good. When ever I see any signs of problem I replace it all.
I use Aeroquip PTFE hose for transmission lines.
https://postimg.cc/gallery/np3zpruo/"Dunning-Kruger Effect"
-a type of Cognitive bias where people with little expertise or ability assume they have superior expertise or ability. This overestimation occurs as a result of the fact that they do not have enough knowledge to know they don't have enough knowledge.
Before you argue with someone ask yourself, "Is this person mentally mature enough to grasp the concept of a different perspective?" If not there is no point to argue.
4X NE2 CHAMPION. 2020 TDRA NE2 Champion
December 07, 2019, 05:26 PM
BuckyI have had some of the rubber hoses on various cars for decades on akky and no issues. I have recently started using ptfe for just about everything. It seems to be so much more forgiving and faster for assembly. Easy to get right every time. I'm sold on it now.
I think you need ptfe for brake lines, but not diy because of the pressure level required.
December 07, 2019, 06:21 PM
chasracerI'm kinda along with Curly on this one. I build my cars with SS - it's what I know and to me it's easy stuff to work. I prefer brand name hose but fittings can come from anywhere except if they are swivel then I prefer brand names. I go about 10 years, then all the hose goes in the trash can - good or bad.
December 08, 2019, 08:41 PM
Ron GusackI went with all ptfe fuel lines and trans cooler lines. I got the hose and fittings from
https://ormebrothers.com/. Not sure if they still offer this deal, but I told him I was a member on DRR got 30% off. It looks like quality stuff to me. Fittings are deep anodized to make them better for alcohol use.
December 09, 2019, 10:27 PM
JP MillerPTFE
December 11, 2019, 07:34 PM
Dave KoehlerTeflon for the win.
However lots of rubber being used out there.
If you have a rubber hose off for some reason and you find that it is now stiff and molded into a shape you may want to consider a replacement.
Dave Koehler - Koehler Injection -
http://www.koehlerinjection.comFuel Injection - Nitrous Charger - Nitrous Master Software - Balancing
99% of fuel injection problems are electric.