DragRaceResults.Com    Bracket Talk    Bracket Talk Forum  Hop To Forum Categories  Tech Talk - by Abruzzi    Weld racing wheels valve stem size
Go
New
Find
Notify
Tools
Reply
  
Weld racing wheels valve stem size
 Login/Join
 
DRR Trophy
Picture of NC3x58
posted
Recently picked up a used set of Weld 16x16 beadlock wheels and they came to us with no valve stem in the wheel. Only question is, the hole is measured at 0.579" diameter.. What size valve stem is this for? Looks like Summit has whatever size valve stem you'd want, but they usually say either 7/16" hole or 5/8" hole..


Nick Craig

1971 Camaro Split Bumper
376ci LS3
 
Posts: 410 | Location: Ohio | Registered: December 28, 2013Reply With QuoteReport This Post
DRR Pro
Picture of rusty
posted Hide Post
this is only a guess,but maybe a lubricated .675(5/8) would fit snuggley in a .579 hole


honesty is the best policy,insanity is a better deffense
1.036, 6.16@ 224

 
Posts: 1396 | Location: texas | Registered: February 17, 2006Reply With QuoteReport This Post
  Powered by Social Strata  
 

DragRaceResults.Com    Bracket Talk    Bracket Talk Forum  Hop To Forum Categories  Tech Talk - by Abruzzi    Weld racing wheels valve stem size

© DragRaceResults.com 2024