July 24, 2018, 12:26 PM
MasRacingPowerglide input question
When going to the 1.250 input shaft for a powerglide from ringless turbo spline what else needs to be changed in the transmission. I know the converter is different. I would assume the spline in the sun gear and direct clutch hub is different? Can the same pump be used or modified or is it completely different pump. I am just curious what is actually involved in making that change over.
July 24, 2018, 07:41 PM
TD3550As per Hutch..C&P..
The switch to a 1.250 shaft (pump,shaft,planetary,hub.sun gear) will require a completely new converter also.
July 24, 2018, 08:06 PM
seabassits costly, thats why i didnt do it
July 24, 2018, 08:11 PM
MasRacingOk thank you. I appreciate the information. Thats kind of what I figured.
July 24, 2018, 10:09 PM
HutchThe next logical step up from a 1" ringless shaft is to go 35 spline 1.125".
This will require a shaft, pump, clutch hub and a planet drive sun depending on what planet you have. The converter will require a new turbine spline but not an entirely different converter. There are step shafts out there also that allows the use of an existing 19 spline input on the planet but converts the front to 35 spline at the turbine through to the hub.
Hutch
July 25, 2018, 08:26 AM
MasRacingquote:
The next logical step up from a 1" ringless shaft is to go 35 spline 1.125".
This will require a shaft, pump, clutch hub and a planet drive sun depending on what planet you have. The converter will require a new turbine spline but not an entirely different converter. There are step shafts out there also that allows the use of an existing 19 spline input on the planet but converts the front to 35 spline at the turbine through to the hub.
This very helpful. Thank you. The 1.125 sounds like the way to go especially since I will be having a new converter built anyway and I am probably changing over to a 1.69 low gear. Just a dumb question can an existing high volume pump be modified or is it a completely different pump. Not trying to cheap out just seeing what can and cannot be done.
Thanks again.