DragRaceResults.Com    Bracket Talk    Bracket Talk Forum  Hop To Forum Categories  Tech Talk - by Abruzzi    Aluminum Head and Block Repair
Page 1 2 3 4 5 
Go
New
Find
Notify
Tools
Reply
  
Aluminum Head and Block Repair
 Login/Join
 
DRR S/Pro
Picture of David Covey
posted
Texas area.

Still looking for a shop that can and WILL repair my block and heads.
Engine dropped a valve seat on the dyno back in March. Parts have been sitting in 2 different shops while owners tripped over them daily instead of getting them out. So I'm looking again for recommendations to get someone to fix them.

I broke a rod at the OG million 3 years ago and have been having a hell of a time with machine shops for the last 2-3 years constant waiting.

Dave

This message has been edited. Last edited by: David Covey,


"It is usually futile to try to talk facts and analysis to people who are enjoying a sense of moral superiority in their ignorance." -Thomas Sowell
 
Posts: 3303 | Location: American By Birth Texan By The Grace Of God  | Registered: April 29, 2004Reply With QuoteReport This Post
DRR Sportsman
Picture of David Gerard
posted Hide Post
Contact the manufacturer for their recommended local source for repair, if aftermarket parts.

I called Dart, when I torched a head and the recommend QMP Racing. They are an hour drive, but the head looked like new.

We have used them for all of our engine machining work since!

You can alway send the parts back to the manufacturer for repair, but shipping each way can get expensive!
 
Posts: 413 | Location: Fullerton, CA | Registered: June 08, 2008Reply With QuoteReport This Post
DRR Elite
posted Hide Post
Send them both back to their manufacturers.
 
Posts: 13522 | Location: NJ | Registered: August 20, 2000Reply With QuoteReport This Post
DRR S/Pro
Picture of David Covey
posted Hide Post
I called Indy Cyl Head. Yes they can repair them (maybe after seeing them).
I just hate to pay the amount of shipping both directions.
I bought a new block from them last month and it cost 550.00 one way and that was at their cost.

It's not that I'm cheap it just seems a waste, if I can get it done withing driving distance.

Dave


"It is usually futile to try to talk facts and analysis to people who are enjoying a sense of moral superiority in their ignorance." -Thomas Sowell
 
Posts: 3303 | Location: American By Birth Texan By The Grace Of God  | Registered: April 29, 2004Reply With QuoteReport This Post
DRR Trophy
posted Hide Post
How about check with local chassis shops
 
Posts: 386 | Location: Natick MA | Registered: November 15, 2017Reply With QuoteReport This Post
DRR S/Pro
Picture of David Covey
posted Hide Post
quote:
Originally posted by Top355x:
How about check with local chassis shops


None local to me other than the shop it is sitting in right now. Well 150+ miles away..lol

Pisser of it is the shop it's in specializes in aluminum block and head repair.

Dave


"It is usually futile to try to talk facts and analysis to people who are enjoying a sense of moral superiority in their ignorance." -Thomas Sowell
 
Posts: 3303 | Location: American By Birth Texan By The Grace Of God  | Registered: April 29, 2004Reply With QuoteReport This Post
DRR Pro
Picture of Alaskaracer
posted Hide Post
We have a couple of guys here that can do really great work. MadCap uses Chris Woolverton when they need it. He's VERY, VERY good....


Mark Goulette
Owner/Driver of the Livin' The Dream Racing dragster
www.livinthedreamracing.com
"Speed kills but it's better than going slow!"
Authorized Amsoil Retailer
 
Posts: 1465 | Location: Back home in Alaska! | Registered: February 13, 2011Reply With QuoteReport This Post



DRR Elite
posted Hide Post
Your best chance of getting it repaired right is having the manufacture fix it. Pay the money!
 
Posts: 13522 | Location: NJ | Registered: August 20, 2000Reply With QuoteReport This Post
DRR Top Comp
Picture of Curly1
posted Hide Post
Check with John Ferry and Ferrys Aluminum Head Repair in Mesquite. He is good and has been a huge help, my motor and heads are going there Monday.


https://postimg.cc/gallery/np3zpruo/
"Dunning-Kruger Effect"
-a type of Cognitive bias where people with little expertise or ability assume they have superior expertise or ability. This overestimation occurs as a result of the fact that they do not have enough knowledge to know they don't have enough knowledge.

Before you argue with someone ask yourself, "Is this person mentally mature enough to grasp the concept of a different perspective?" If not there is no point to argue.

4X NE2 CHAMPION. 2020 TDRA NE2 Champion
 
Posts: 3972 | Location: United States of Texas | Registered: April 02, 2011Reply With QuoteReport This Post
DRR S/Pro
posted Hide Post
quote:
Originally posted by Curly1:
Check with John Ferry and Ferrys Aluminum Head Repair in Mesquite. He is good and has been a huge help, my motor and heads are going there Monday.


x2


J.R. Baxter

""Fathom the hypocrisy of a Government that requires every citizen to prove they are insured ..but not everyone must prove they are a citizen."

2024 Miller
Rolla Competition Engines
ProCharger
Hoosier Tires
Abruzzi
 
Posts: 1513 | Location: Waxahachie | Registered: July 04, 2005Reply With QuoteReport This Post
DRR S/Pro
Picture of Big Steve
posted Hide Post
Might try calling Nitro racer Terry Haddock who owns Lone star aluminum block repair in Temple Tx
 
Posts: 2403 | Location: Moving back to the door side | Registered: April 30, 2010Reply With QuoteReport This Post
DRR S/Pro
Picture of David Covey
posted Hide Post
quote:
Originally posted by Curly1:
Check with John Ferry and Ferrys Aluminum Head Repair in Mesquite. He is good and has been a huge help, my motor and heads are going there Monday.


Don't take your stuff to him yet.. That's where my stuff is at..lol
I was there first... Big Grin
I'm calling him again Monday to try to put a fire under his azz. Probably wont do any good as I have had no luck doing it so far.

Dave


"It is usually futile to try to talk facts and analysis to people who are enjoying a sense of moral superiority in their ignorance." -Thomas Sowell
 
Posts: 3303 | Location: American By Birth Texan By The Grace Of God  | Registered: April 29, 2004Reply With QuoteReport This Post
DRR S/Pro
Picture of David Covey
posted Hide Post
quote:
Originally posted by Big Steve:
Might try calling Nitro racer Terry Haddock who owns Lone star aluminum block repair in Temple Tx


Terry Haddock only wants to work on fuel stuff. I tried to get him to weld up a KB block years ago. He told me to try to find someone else to do it. I wont go back to someone that doesn't want my work.

Dave


"It is usually futile to try to talk facts and analysis to people who are enjoying a sense of moral superiority in their ignorance." -Thomas Sowell
 
Posts: 3303 | Location: American By Birth Texan By The Grace Of God  | Registered: April 29, 2004Reply With QuoteReport This Post
DRR S/Pro
Picture of David Covey
posted Hide Post
Haddock is only about 30 miles from me. It would be nice.

I ran across an ad from a shop in San Antonio that does aluminum engine repair. Supposedly hi performance, so we will see where that goes.

Dave


"It is usually futile to try to talk facts and analysis to people who are enjoying a sense of moral superiority in their ignorance." -Thomas Sowell
 
Posts: 3303 | Location: American By Birth Texan By The Grace Of God  | Registered: April 29, 2004Reply With QuoteReport This Post



DRR S/Pro
Picture of David Covey
posted Hide Post
quote:
Originally posted by Coloradoracer:
We have a couple of guys here that can do really great work. MadCap uses Chris Woolverton when they need it. He's VERY, VERY good....


Do you have a address for him so I can see how far away he is?

Dave


"It is usually futile to try to talk facts and analysis to people who are enjoying a sense of moral superiority in their ignorance." -Thomas Sowell
 
Posts: 3303 | Location: American By Birth Texan By The Grace Of God  | Registered: April 29, 2004Reply With QuoteReport This Post
DRR S/Pro
Picture of David Covey
posted Hide Post
quote:
Originally posted by 1320racer:
Your best chance of getting it repaired right is having the manufacture fix it. Pay the money!


I realize that may be best. But I want to take it to the shop myself. Then I can get an idea of what it's going to cost and the time involved.
I'd be more than happy to let Indy do the work, but if they were to tell me it isn't worth it then I would have blown through more than a thousand dollars in shipping for nothing.
If I can take it to a shop myself and were to get the same answer I would only be out the fuel involved.
It isn't about sending it to them it's about the possible waste.

Dave


"It is usually futile to try to talk facts and analysis to people who are enjoying a sense of moral superiority in their ignorance." -Thomas Sowell
 
Posts: 3303 | Location: American By Birth Texan By The Grace Of God  | Registered: April 29, 2004Reply With QuoteReport This Post
DRR S/Pro
Picture of The Bozman
posted Hide Post
Cal Reher and see who they are using.


Keeping the Socialists and NEO-LIBERALS at bay with FACTS one post at a time !!!

Freedom isn't free !!! Thank a veteran, they will actually appreciate it.
 
Posts: 2497 | Location: Gilmer, Texas | Registered: June 25, 2002Reply With QuoteReport This Post
DRR S/Pro
Picture of David Covey
posted Hide Post
quote:
Originally posted by The Bozman:
Cal Reher and see who they are using.


Thanks..

Dave


"It is usually futile to try to talk facts and analysis to people who are enjoying a sense of moral superiority in their ignorance." -Thomas Sowell
 
Posts: 3303 | Location: American By Birth Texan By The Grace Of God  | Registered: April 29, 2004Reply With QuoteReport This Post
DRR S/Pro
Picture of Big Steve
posted Hide Post
quote:
Originally posted by David Covey:
quote:
Originally posted by The Bozman:
Cal Reher and see who they are using.


Thanks..

Dave


RM presently does not have a welder in the shop. They use Kebin Kinsley for aluminum welding when they need it. He is as good as they come with welding and fabrication. Not sure if he does blocks. Super nice guy. Give him a call (817) 226-2280. His shop is in Arlington
 
Posts: 2403 | Location: Moving back to the door side | Registered: April 30, 2010Reply With QuoteReport This Post
DRR S/Pro
Picture of Big Steve
posted Hide Post
I know Chris Frank at Frankenstein engine dynamics in Weatherford can do the complete repair on the head, from welding to finish machining, not sure if they would do the block or not

https://frankensteined.net/
 
Posts: 2403 | Location: Moving back to the door side | Registered: April 30, 2010Reply With QuoteReport This Post
  Powered by Social Strata Page 1 2 3 4 5  
 

DragRaceResults.Com    Bracket Talk    Bracket Talk Forum  Hop To Forum Categories  Tech Talk - by Abruzzi    Aluminum Head and Block Repair

© DragRaceResults.com 2024