DragRaceResults.Com    Bracket Talk    Bracket Talk Forum  Hop To Forum Categories  Tech Talk - by Abruzzi    4.86:1 gear to 5.29:1 ??
Page 1 2 
Go
New
Find
Notify
Tools
Reply
  
4.86:1 gear to 5.29:1 ??
 Login/Join
 
DRR Top Comp
posted Hide Post
quote:
Originally posted by HR3377:
how did it go to 1.00 iift with .660 springs??


You'd have to ask Weingartner, you're referring about the flow sheet right?

These aren't my heads, I boxed them up & sent them to Weingartner and handled all the communications for the owner, is all.
 
Posts: 9398 | Location: Madeira Beach Fl. | Registered: June 12, 2018Reply With QuoteReport This Post
DRR Pro
posted Hide Post
quote:
how did it go to 1.00 iift with .660 springs??


All the sbc flow sheets I’ve seen from heads that were ported show the flow to 1.00. I believe this is standard. The intended cam was .660, but someone else could do a 1.6 rocker and get more out of this head with same cam or different cam.
 
Posts: 2446 | Location: 53056 | Registered: December 30, 2009Reply With QuoteReport This Post
  Powered by Social Strata Page 1 2  
 

DragRaceResults.Com    Bracket Talk    Bracket Talk Forum  Hop To Forum Categories  Tech Talk - by Abruzzi    4.86:1 gear to 5.29:1 ??

© DragRaceResults.com 2024